Jump to content


titanium2

Member Since 29 Jun 2009
Offline Last Active Mar 12 2020 06:02 AM

Topics I've Started

War Of The River 2

03 August 2010 - 11:56 PM

When: August 14th Starts at 10:00 ends at 4:00ish

Where: Junkins Ln, Eliot ME 03903

http://maps.google.c...=h&z=19&layer=t

Banned:

Any blaster with a tank larger than a mega missle with a plugged pump that is singled.

Darts:

Must have a felt or glue tip fully covering the weight

If you are using heavy darts keep your distance from people.

Post as to which date or dates you would be able to attend.

Definates:
Titanium2 + 1
JubJub517
jaybo1996

Mabeys:
Wes7143

War In New Hampshire/maine Area *date Change Take Two

28 March 2010 - 02:45 PM

When: May 22nd starts at 10:00 ends when we call it quits about 4:00pm

What: Rounds: team deathmach 3:15, Gunslinger haven, Zombies

Where: Odiorne Point State Park 570 Ocean Boulevard, Rye, NH 03870

Google maps:
http://maps.google.c...841094240769476

Banned: Any blaster that shoots well over 100ft unless slug darts are used with it.

Note:We will have time to trade and sell blasters so bring guns and money if you wish.

I hope we can get enough attendees for this and it should be a blast

Definite:

Titanium
jubjub517

Maybes:

popatachi
eliman+2
jediaelthewise+?
bookybabora
Wes7143+2
stuck by stefan
jaybo1996+2

Battle Of The Bunker

31 January 2010 - 06:57 PM

I saw a thread for a few nerfers in Maine and Massachusetts and many had interest in a war so I figured I would host one.

Rounds: Zombies, team deathmach 3/15, and clipped and pistol rounds (no new breeched LS's that shoot over 60ft)

Banned: Any blaster that shoots well over a hundred feet, titans, plugged bbbb and anything that puts holes through people IE cobra. For the zombies rounds lets try to keep the ranges of the guns used under 60 feet. Also anything black!

Foam melee weapons allowed!

Wear warm clothes it is water front so it is very cold also I recomend hats to save cartilige and gloves to save fingers.

Date: Saturday March 20, 2010 10:00 till everyone is frozen or tired

Location: fort foster Kittery Maine

This forty was built to protect Kittery in world war one and was never fired upon nun the less there are massive bunkers that allow for an excellent nerfing field.

There are two bunkers one that runs along a field that has ladders going up it and allows you to climb on top of it and another that is a large centeral structure with steps and a catwalk like passage in the front or it. Since a picture is worth a tousand words here are a few!

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

I would love to get a good turnout for this so bring your friends

Definites:
Titanium2+2
Wes7143+1-3
jaybo1996+2
stuck by stefan
bookybabora

Maybes:

thomas
popatachi
jubjub517

Lanard Shotgun Petg

13 January 2010 - 09:56 PM

Posted Image
First off unscrew your gun and take out the turret take off the fist two orange pieces infront of the base of the turret. Now you want to use a knife to widen the holes in the back of the turret until the holes are a little smaller than your barrel material. Make sure your darts can fit through the widened holes but that the barrel material wont slip through.
Posted Image
Then take your barrel materieal of choice and cut four 8in pieces. After you do that then you take your hot glue gunand hot glue your barrels onto the holes you just widened and line them up strait then hot glue around the barrels.
Posted Image
Whan you first take the plunger tube out of the gun it will have a white piece on the end on it take this peice off and hot glue on a rubber washer.
Posted Image
On the plunger head hot glue the seams on the sides and top then wrap e-tape around it until it fits nicely in the plunger tube. Then take some craft foam cut it into a circle and hot glue it to the top of the plunger head.
Posted Image
I added a rapid fire shot gun and bbb springs.
Posted Image
Now mark off where the two barrels are on the left and right. Then drill out the two layers of plastic where you are lined up with the barrels.
Posted Image
Then I put a little piece of 1/2 in PVC inside the shell in-between the two layers of plastic and hot glued it in. Now its rear loading!
Posted Image
The internals
Posted Image
The finished Product!
Posted Image
A size comparison picture
Range 90-100ft! My new primary.