slimjim7

the concept is that instead of using SCH 40 half inch PVC, you can use half inch Outer diameter PVC, IE: the PVC that can fit inside regular half inch. the trick is to drill out the inside with a 5/8 drill bit the problem is that if you have the drill bit drilling inside the vice it will put a gaping hole in the side so do a little more than half then flip it around so it fits a dart its more cost effective solution to an Angel Breech and will fix your broken longshot
this is my first post state you mind but not if its already stated in replies.


sorry roboman is wrong or i'm reading it wrong too just figure out a way whatever drill bit to make a dart fit less snugly IE so you can blow it out with sheer lung power. i'm sorry for the incovience of the people that already commented.


i applaud boltsniper, captain slug, forsaken angel,and uin 13 for contributions to this site and the nerfing community keep up your genius.
(i do not like any one more than the other so they are in alphabetical order)

ive also considered getting ABP5K internals (captain slug) into a longshot or Recon
(i've always wanted a semi automatic longshot) but thats off topic.