mcwario13

Wow. I find this very helpful and amusing. Where can i get an aluminum trigger for a bbbb?

...and it has a bad seal whats wrong with it

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

Has the crapiest seal ever. Moves to the coupler so fast that it's as if im dry firing

It sounds like you knew the problem from the start...

acctually i replaced and lubricated the plunger head it still suck and replaced the adaptor bushing thing

Just fix the seal, and you should be fine. Some lubricant might do the trick if you have the standard plunger head and don't want to buy any better piece.

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

Has the crapiest seal ever. Moves to the coupler so fast that it's as if im dry firing

are you using pvc or cpvc

Do your darts fit tightly in the PETG? If they don't, then that's you problem.

pretty tight not to much
its thin walled