7 replies to this topic

[mcwario13]

I own a plusbow and it doesn't shoot very far. It only goes 20 ft. I have found no way to fix my plusbow. There is no need to post any more comments on this post. I am ordering a new Plusbow

Edited by mcwario13, 02 August 2010 - 07:03 PM.

[Abyss Mods]

Do your darts fit tightly in the PETG? If they don't, then that's you problem.

[mcwario13]

Do your darts fit tightly in the PETG? If they don't, then that's you problem.

pretty tight not to much
its thin walled

[Carbon]

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

[mcwario13]

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

Has the crapiest seal ever. Moves to the coupler so fast that it's as if im dry firing

[Hipponater]

...and it has a bad seal whats wrong with it

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

Has the crapiest seal ever. Moves to the coupler so fast that it's as if im dry firing

It sounds like you knew the problem from the start...

Just fix the seal, and you should be fine. Some lubricant might do the trick if you have the standard plunger head and don't want to buy any better piece.

[mcwario13]

...and it has a bad seal whats wrong with it

A troubleshooting technique: remove the barrel, prime the gun, hold your palm firmly over the end, and fire. Does the plunger slow down/not move all the way? If yes, you have a dart fit problem. If no, you have a plunger/plunger seal problem.

One other problem: you have not one, but two shift keys, and a variety of punctuation keys. Please figure out when you should be using them.

Has the crapiest seal ever. Moves to the coupler so fast that it's as if im dry firing

It sounds like you knew the problem from the start...

acctually i replaced and lubricated the plunger head it still suck and replaced the adaptor bushing thing

Just fix the seal, and you should be fine. Some lubricant might do the trick if you have the standard plunger head and don't want to buy any better piece.

[CaptainSlug]

i have a +bow and i doest shoot far and its a normal pvc couplar and petg nested but
it only goes 10 feet with my stefans and it has a bad seal whats wrong with it

Your post quality is terrible. fix it or you will be suspended for an amount of time decided upon by the forum staff.

Please re-read the board rules.
http://nerfhaven.com...?act=boardrules