Jump to content

  2. → Viewing Profile: Posts: 1337hax0r

1337hax0r

Member Since 28 Jul 2006
Offline Last Active Aug 20 2006 06:55 PM

Posts I've Made

In Topic: No O-ring On My At2k?

16 August 2006 - 11:32 PM

Yea I just hot glued the turret in and its working beautifully. I'm hitting 85 ft. level with my 6" brass barrels ^_^ .

In Topic: 5/8" -> 1/2" Fbr

13 August 2006 - 10:15 PM

So if I wanna use both I'm screwed =/

In Topic: 5/8" -> 1/2" Fbr

12 August 2006 - 10:04 PM

This is going to be on both a sm1500 and an at2k. On at2k it is a little confusing, since I cut the turret at the line so that the barrel stubs are remaining. The body of the dart fits snugly in these stubs, so adding anything to the inside of them like many mods suggest would be way too small or require tons of sanding. I think I'll just cut the barrels flush with the base.

In Topic: 5/8" -> 1/2" Fbr

12 August 2006 - 01:28 PM

I think what I'm gonna do is get 2 30 packs of dart taggers and make myself a nice set of 60 converted darts. Does anyone know what brass size they would recommend in an airgun for this ammo type? Cxwq recommends 9/16, but everywhere else I've seen people use 17/32, but if someone has experience with converted dart taggers please let me know.

Also, I wish I had some of that thin-wall PVC around here, but I haven't found any to fit my FBR.

In Topic: 5/8" -> 1/2" Fbr

11 August 2006 - 09:25 PM

OK I think you have a couple things backwards here my friend. First of all, 5/8" stefans BARELY fit in SCH 40 1/2" PVC, so adding the copper barrel inside would make it useless. Also, spring powered guns rely on building pressure behind the dart so they require a tighter (perhaps nested) fit whereas air powered guns work best with 9/16 brass for micro stefans. Anyway, I appreciate you trying to help. I wish I had some cpvc so I could test the FBR conversion...maybe I'll try it with a crayola barrel.

  1. NerfHaven
  2. → Viewing Profile: Posts: 1337hax0r
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·