Jump to content


Member Since 20 Jul 2008
Offline Last Active Jun 12 2011 11:05 AM

Posts I've Made

In Topic: Martial Arts?

29 June 2009 - 11:27 AM

I got my black belt in tai kon do in 2007. :ph34r:

In Topic: Nuvo - Vancouver Nerf Wars

25 April 2009 - 11:22 PM

Hi guys,
I live in lower main land and I am interested in coming to the 2009 war. Please put me on the list and contact me if the date is set. I will most likely be free all summer.

P.S.- I can also bring a few friends with me.

In Topic: Modification and Paintjob Pictures

20 December 2008 - 09:43 PM

I bought two guns from Coop and here they are:
Posted Image

The big blast itself(although I did not do this mod, I did make it so that it is more comfortable):
Posted Image

The big blast is modded with a brass breach and here is a picture with my stefan in the breach:
Posted Image

The Big Bad Bow itself(I am a little bit disappointed about the BBB because coop "forgot to send the turret" ):
Posted Image

To Coop: Thank you for selling these to me, but if you are looking at this please reply to my Pms that I send you because I am not so happy about you not sending me the BBB turret and the pre-made stefan heads that I suppose to have :( . Please reply to my PMs and I am sure we can work this out. :)

In Topic: What Should I Do To My Bbb

25 November 2008 - 08:23 PM

Depends on what kind of coupler you have. If you have a 1/2 cpvc coupler use 1/2 cpvc pipe.

BBB is a spring gun...

My barrel is about 6 inches on it

I have both couplers and can use anything, but I just want to know which barrel would be better. I heard that BBB gets very good range.

Since you have both couplers, why not try both? See what ranges you get and what you like better. Ranges hinge on so many different variables. It's almost personnal.

What if I hot glue the coupler on and can't get it off? I am just afraid that I might mess my BBB up.

In Topic: What Should I Do To My Bbb

25 November 2008 - 08:19 PM

You could stick a cpvc coupler in a PVC coupler but, it has to be from ACE becuase every where else I've been they buldge out in th middle therefore not fitting but ACE's go straight down like a perfect cylinder. THen you cut off the remaining CPVC coupler and glue the side with the half a CPVC coupler onto the spot where your putting the coupler. Now you can use Cpvc and PVC.

I live in Canada and I don't think there are any ACE hardware stores here.