Jump to content


Member Since 01 Jun 2008
Offline Last Active Oct 07 2012 11:20 AM

Topics I've Started

At2k Pump Test Thing With A Balloon

05 December 2009 - 07:58 PM

I dremeled the yellow tubing to make the OD thinner, and put a coupler on, sadly its a little loose, but I e-taped it for test purposes, then I attached tubing to the other coupler, its perfect.. I have no glue or tape on it. Then at the other end of the tubing I attached a balloon with etape, I pump it the balloon gets bigger, but then the air comes out. Is it the fact that the balloon is etaped on, or something else? How can I test if the coupler works without flooding the whole thing with water? Thanks in advance.

At2k Question

29 November 2009 - 12:36 PM

I'm integrating my 2k into a PAS, and I need to extend the tubing (Tried ExTenze, it didn't work D:). I went into my dads office and got some tubing that I pretty sure is 3/8th's, my question is do I have to just glue it on? Or could I use nipples and couplers? Thanks in advance.

What Screwdrivers Do You Use?

10 June 2009 - 06:21 PM

I'm just wondering, since i'm going to get new ones. What do you guys prefer?

Minimized Crossfire + Mod

26 April 2009 - 10:00 AM

Well, I wanted to have a nice sidearm that I could run around with, ALSO I didn't want to hold it all the time. A wile ago I bought a holster for a airsoft gun about 3 months ago. I am saving up, so I used what i have

Here is the shell next to the holster

Posted Image

Now next to a shell BEFORE minimization

Posted Image

Cocker Before

Posted Image

Cocker After

Posted Image

I'm done on minimization, Ill try to squeeze 50 out of this. And sorry for the crappy quality pic's, I used my video camera to do them

Big G'town Garage Sale

24 March 2009 - 08:07 PM

The city of Georgetown is having a big citywide garage sale at the square, since there is a couple of people who live in Austin, (Georgetown is north of there if you don't know) Its is in the square, Where the library and jail is (for reference) Hopes this helps you!