25 replies to this topic

[nightfinder]

Well, I wanted to have a nice sidearm that I could run around with, ALSO I didn't want to hold it all the time. A wile ago I bought a holster for a airsoft gun about 3 months ago. I am saving up, so I used what i have

Here is the shell next to the holster







Now next to a shell BEFORE minimization





Cocker Before




Cocker After



I'm done on minimization, Ill try to squeeze 50 out of this. And sorry for the crappy quality pic's, I used my video camera to do them

Edited by nightfinder, 30 April 2009 - 08:43 PM.

[cheesypiza001]

Not to hijack your thread, but if your really want to minimize it to the max, do What I did.

Edited by cheesypiza001, 26 April 2009 - 01:04 PM.

[nightfinder]

Now its CPVC Couplered. Ill do i kind of "How To" On this process
First cut your plundger/barrel like this

Then drill through the AR's like this

Next glue on the CPVC coupler

Okay I dont have a picture for this, but shave the front of the gun
Now close her up and glue on the sides like so(I might try to Gorilla Glue here, Hotglue Broke)

Now here is a Effeminate picture of this BEAST

Edited by nightfinder, 30 April 2009 - 09:26 PM.

[JATDO]

Now its CPVC Couplered. Ill do i kind of "How To" On this process
First cut your plundger/barrel like this
]
Then drill through the AR's like this
Next glue on the CPVC coupler

Okay I dont have a picture for this, but shave the front of the gun
Now close her up and glue on the sides like so

Now here is a Effeminate picture of this BEAST

Could you post a clearer pic of the hole thing? did you cut any of the front off?
But it does look cool. What are the ranges now?

[nightfinder]

[/quote]
Could you post a clearer pic of the hole thing? did you cut any of the front off?
But it does look cool. What are the ranges now?
[/quote]
Oh, you dare say no effects? HOW DARE YOU!!!! But fine
The cardboard is cosmetic to eleminate the bare parts (It'll be painted soon)

Edited by nightfinder, 30 April 2009 - 09:04 PM.

[Wes7143]

Sloppy and poorly done. I doubt the dart will even be able to leave a barrel of that length.

Did you pull the top and bottom parts off, or run them over with your car? Something called a cutting tool exists in this world.

[wingd man]

Could you post a clearer pic of the hole thing? did you cut any of the front off?
But it does look cool. What are the ranges now?

Oh, you dare say no effects? HOW DARE YOU!!!! But fine
The cardboard is cosmetic to eleminate the bare parts (It'll be painted soon)

nah, picnik can get annoying after awhile... and why not just do what flash flint did and use a string to prime it?

Edited by wing'd man, 30 April 2009 - 09:12 PM.

[JATDO]

Oh, you dare say no effects? HOW DARE YOU!!!! But fine
The cardboard is cosmetic to eleminate the bare parts (It'll be painted soon)

Thanks! I'm planning to do a barrel mod to mine soon. you should check my CF out. Page 132 on the pj and mod thread.
It kind of looks like a Luger...

Edited by JATDO, 30 April 2009 - 09:13 PM.

[nightfinder]

Sloppy and poorly done. I doubt the dart will even be able to leave a barrel of that length.

Did you pull the top and bottom parts off, or run them over with your car? Something called a cutting tool exists in this world.

For gods sake, why be so negitive?

[nightfinder]

Could you post a clearer pic of the hole thing? did you cut any of the front off?
But it does look cool. What are the ranges now?

Oh, you dare say no effects? HOW DARE YOU!!!! But fine
The cardboard is cosmetic to eleminate the bare parts (It'll be painted soon)

nah, picnik can get annoying after awhile... and why not just do what flash flint did and use a string to prime it?

Uncomfortable.

[Wes7143]

Sloppy and poorly done. I doubt the dart will even be able to leave a barrel of that length.

Did you pull the top and bottom parts off, or run them over with your car? Something called a cutting tool exists in this world.

For gods sake, why be so negitive?

Because it's like watching the rescued animals commercials. It just looks so abused and mistreated.

[nightfinder]

Sloppy and poorly done. I doubt the dart will even be able to leave a barrel of that length.

Did you pull the top and bottom parts off, or run them over with your car? Something called a cutting tool exists in this world.

For gods sake, why be so negitive?

Because it's like watching the rescued animals commercials. It just looks so abused and mistreated.

This was my first shellwork mod. I couldint use power tools since my parents were asleap, so I improvised

[nerfer63]

Sloppy and poorly done. I doubt the dart will even be able to leave a barrel of that length.

Did you pull the top and bottom parts off, or run them over with your car? Something called a cutting tool exists in this world.

For gods sake, why be so negitive?

Because it's like watching the rescued animals commercials. It just looks so abused and mistreated.

This was my first shellwork mod. I couldint use power tools since my parents were asleap, so I improvised

You couldn't had waited? Poor little crossfire its okay.

[Lone Wolf14]

I unfortunatly have to agree with Wes7143 and nerfer63. This mod is not very clean, and you could have waited til morning. Or now you could at least try to clean it up. And, I have to know what do you mean by "improvised" ?

[nightfinder]

I unfortunatly have to agree with Wes7143 and nerfer63. This mod is not very clean, and you could have waited til morning. Or now you could at least try to clean it up. And, I have to know what do you mean by "improvised" ?

I rather not say what I used, i'd most likely get flamed, also its a bit barbaric

[nerfer63]

I unfortunatly have to agree with Wes7143 and nerfer63. This mod is not very clean, and you could have waited til morning. Or now you could at least try to clean it up. And, I have to know what do you mean by "improvised" ?

I rather not say what I used, i'd most likely get flamed, also its a bit barbaric

you used plyers didn't you.

[nightfinder]

I unfortunatly have to agree with Wes7143 and nerfer63. This mod is not very clean, and you could have waited til morning. Or now you could at least try to clean it up. And, I have to know what do you mean by "improvised" ?

I rather not say what I used, i'd most likely get flamed, also its a bit barbaric

you used plyers didn't you.

Nope, My skill with bolt cutters is AWESOME isn't it?

[Shrub]

BOLT CUTTERS? It's called a hacksaw which works better and has been around longer allowing better revision on the blades.

[nightfinder]

BOLT CUTTERS? It's called a hacksaw which works better and has been around longer allowing better revision on the blades.

Dad thinks ill cut my hand off without supervision and help. The only other person up then was my 3 year old brother

[JATDO]

BOLT CUTTERS? It's called a hacksaw which works better and has been around longer allowing better revision on the blades.

Dad thinks ill cut my hand off without supervision and help. The only other person up then was my 3 year old brother

How old are you that your parents can't trust you with at least a hand saw?
Or
What did you do wrong making your parents not trust you?

[nightfinder]

BOLT CUTTERS? It's called a hacksaw which works better and has been around longer allowing better revision on the blades.

Dad thinks ill cut my hand off without supervision and help. The only other person up then was my 3 year old brother

How old are you that your parents can't trust you with at least a hand saw?
Or
What did you do wrong making your parents not trust you?

My dad cut his hand when he was a kid, that's why I cant use a hand saw

[BritNerfMogul]

BOLT CUTTERS? It's called a hacksaw which works better and has been around longer allowing better revision on the blades.

Dad thinks ill cut my hand off without supervision and help. The only other person up then was my 3 year old brother

How old are you that your parents can't trust you with at least a hand saw?
Or
What did you do wrong making your parents not trust you?

My dad cut his hand when he was a kid, that's why I cant use a hand saw

So because your dad was an idiot, YOU'RE not allowed to use tools?

Oh dear god.

My dad did allsorts of stupid things with tools in his life, from childhood and has had more accidents that I care to mention. He stills lets me use tools. Is he worried you won't hurt yourself, therefore proving yourself smarter?

Edited by BritNerfMogul, 02 May 2009 - 10:17 PM.

[JATDO]

I just cut my hand 10 minutes ago.
Suck it up use a bandaid and you dad doesnt have to know!

[Renegademilitia15]

Guys, just because it isn't clean, doesn't mean it doesn't work.
Most of the time, the old "glue some crap on there" approach works well enough.

Though, in this case it doesn't. Adding a longer barrel to a gun that only gets about 50 ft tops, isn't a good idea.

Oh, and a hacksaw is more dangerous than boltcutters? Please........

Edited by Renegademilitia15, 02 May 2009 - 10:01 PM.

[nightfinder]

Guys, just because it isn't clean, doesn't mean it doesn't work.
Most of the time, the old "glue some crap on there" approach works well enough.

Though, in this case it doesn't. Adding a longer barrel to a gun that only gets about 50 ft tops, isn't a good idea.

Oh, and a hacksaw is more dangerous than boltcutters? Please........

With bolt cutters I have both hands on the handles, unlike a hacksaw, ALSO I realized it is really hard to get this to work with hot glue, I tried super glue and I dry fired it and the plunger peace FLEW OUT. So i'm going to Gorilla Glue this

Edited by nightfinder, 03 May 2009 - 08:48 AM.