Jump to content


Member Since 04 Oct 2018
Offline Last Active Dec 27 2018 11:32 AM

Posts I've Made

In Topic: Modification and Paintjob Pictures

01 November 2018 - 05:30 PM

This is my first paint job mod, plus my first attempt at including led's. It's a modulus with an OFP cage, containment crew flywheels and MTB Neo-Rhino 130's. It's rewired and runs on a 3s lipo. I used 3 different Rust-oleum paints; matte hammered black, metallic oil rubbed bronze, and metallic cobalt blue. I also included 3 blue led's (2 in the front and 1 under the jam door) which are powered by a 9 volt and have a led lighted switch in the carry handle. And lastly there is a green voltmeter on the back. I think it turned out very well, I'm extremely happy with it. 

In Topic: Double Rhino Fire turret

29 October 2018 - 11:23 AM

Yeah that's what I'm thinking too. I haven't been able to find any suitable dual shaft motors. Thanks!

In Topic: Modification and Paintjob Pictures

04 October 2018 - 05:31 PM

Hi guys, 


I'm new to Nerf modding and brand new to this forum. This is my auto Stryfe, it's my first flywheel mod ever. I decided to kinda go all out and make it automatic. It's got a Worker canted cage, flywheels, and auto kit, with Fang motors. I run a 2s lipo and I put a voltmeter under the jam door which kinda doubles as a neon when it's closed. The rev trigger is a 15A microswitch from OutOfDarts, and I used 18 gauge wire throughout. It's got a jase3d battery door and extended magwell, a translucent blue stryfe parts set from BiggzNZ, and a Fang angled foregrip. 


Overall I'm very happy with how this turned out, and I'll definitely be doing more flywheel mods in the future. I haven't mastered paint jobs yet, so I'm not sure if I'm going to paint this build. But if you have any ideas/suggestions I'm definitely open to them. Thanks!