Lostpinky

So a bit more research and I realised the thing I thought was cool, is actually really bad, so omw stage 1 and 2 installed with GF pump action... it is yet to be painted

 

 20170218_193137.jpg   79.05KB   94 downloads

So I've been recommended the following kit, the pouch should holder the Worker 22 mags easily.

 

http://www.monkeemod...&product_id=132

 

So GavinFuzzy has posted the pump action kit, woot. Not sure how long all the pieces are going to take to get here. In the meantime I got a little impatient and did some futher modding of the mk2.

I cut the breech load area to remove the V, with the worker 22s the darts were being deformed and I added one of the lock springs to the catch spring area, above the air chamber. This has resulted in making the Recon MK2 a semi reliable pump action shot, with no trigger. Not exactly slamfire because you dont need to hold the trigger down to fire. Just prime back and forward and it fires.

Pictures to come as soon as I'm back home.

Thanks a lot for the video and the advice :-)