Justin Andrews

17th Century English Lock Cavalry Pistol (field test prototype).
LARP safe foam firing firelock.

Based on an existing English (or Doglock) pistol, this was a large pistol commonly used by cavalrymen.

As a thank you for the inspiration of the Rainbow catch, I'd like to share the design for the modified version of the Rainbow catch that I used in my LARP ready Arquebus.

The first picture is of the 3D printed components (SLS printed in nylon) components and the two catches (one for the piston, the other smaller one is a safety catch for the ramrod) which are laser cut.
The catch body is on the far left. (and yes that is an SLS printed piston!)

The next picture is a rendering of the catch body itself. The actual catch slides inside the catch body. The catch spring, rather than being on the pin, is hidden inside a hole drilled inside the catch itself. This allows the spring to be contained inside the pseudo barrel of the arquebus, and allows for a slightly smoother operation and less chance of trying to work its way into the barrel through the hole drilled for the pin.
Although its not visible in the photo, the catch itself is machined to have a countersunk chamfer on it. 

The little indentation at the bottom of the catch body, is for a metal lug to be screwed into it, this allows the barrel to be fixed into the stock, and is not that different to the same feature seen on barrel breech plugs seen on actual black powder guns.

Edit:

I've added a drawing of how the catch now looks.
The square recess takes the spring (5mm dia spring), while the T section is a nut capture for an M3 Nut, which saves having to drill and tap the catch.

I've also uploaded an STL of this catch, in case anyone want to have a play with it.

Hi.
I've been lurking here a while, and first off I'd like to thank the long time posters here, who's posts have helped me design this build. Especially the Rainbow guys for their remarkable catch mechanism.

I'd like to share a slightly different design, which is a musket style homemade designed for use in fairly authentic Medieval LARP games, rather than NERF wars and is based around the NERF Rival ammo.

The design is based around the need to use a ramrod, which is passed down the barrel, and then used to push down and prime the piston, which uses a slightly modified rainbow style catch at the rear of the barrel. The round is then dropped down the barrel, and pushed home with the ramrod. Finally a small amount of talcum powder is poured down the barrel, and a toy cap is fitted just behind the air cylinder.

When the gun is fired, the catch in the rod leaves the rainbow catch, and is caught at the end of the piston travel on a ring, this then activates the cap (making the musket go Bang!) the ball is fired along with the talc (making a plume of smoke) 

Its neither quick to load, or very long ranged, but this is what we were aiming for, as we want them to simulate the loading and effective range of a real 15th Century Arquebus/Musket.


Anyway, if people are interested, I can post some pictures of the internals later, and perhaps a video of it working.
 13151610_10153970264005041_996548031108662348_n.jpg   168.74KB   266 downloads

 13124859_10153970264010041_7585388487021208168_n.jpg   173.89KB   242 downloads

Trigger mechanism
 13001328_10153944539475041_872241717873425710_n.jpg   32.07KB   264 downloads

The bit what goes bang, also showing machined barrel connector
 12957701_10153911449950041_3454661782550796522_o.jpg   116.64KB   250 downloads

Some of the internals on display
 12909469_10153904083730041_1495342821967554247_o.jpg   114.41KB   261 downloads

Thanks 
Justin.