racer188

Hey guys has anyone here tried these darts? Link They resemble my Xplorer dart from Singapore but does not require me to glue them together and cost a lot less.

I'm going to order a some and see how well they hold up. Maybe a viable option for Nerf Wars

Here it is, a quick overview of the F10555 shotgun grip for the retailator Taobao Link

Here is the kit, I purchased it with the picatinny side rails and decided to use my own foregrip



Installed product with a gavinfuzzy front barrel tip Hobbymods Link









I plan on getting the picatinny top rails, Link , along with the M4 butt stock adapter shortly and then do a full angel breech mod. Should be able to get some pretty decent performance out of this blaster when done.

So I had this slingstrike sitting around that I couldn't get rid of, even on eBay.

Decided to see if I can mod it. Here you go



Really not much you can do with this thing.

Removed all the locks, including the one that locks the Y portion in place. By removing the lock you can now draw the bungee without a dart.



I replaced the original string with 1/8 OD surgical tubing



I cut the end of the guide to gain just bit more of draw.



And finally, covered the handle with some silicone self fusing tape.



With these mods I'm able to register 65ish fps on the Chrony.

Got some goods in the mail today all the way from China. Saw these a few weeks back and PYSK just did a review on his channel, here

Link to item on TaoBao

First impressions, the 3D printing is amazing and very fine quality. I have this on one of my longshots with a 14KG spring and the install was super easy. I ordered mine with the added picatinny side rail covers but did not order the pump grip bottom picatinny attachment











Comparison to an Xplorer gen 1 shotgun grip



I also got F10555's shotgun kit for the retaliator, which I will try to post later. Link is here

My OMW Hammershot kit just arrived. Here are some pics of the kit and initial remarks

Packaging is nice. The mold quality not so much. If you look carefully you will see a distinctive line down the barrel, almost looks like a crack but its the what it is molded.


What comes in the kit


The new internals. My hammer on the thumb area looks really chewed up. Not sure if its the mold or a dog was at the factory


The new barrel. What is puzzling is the half circle opening for the darts instead of a full circle. I forget if the original plunger design is only a half circle




And the implant patient.Currently has a Blasterparts Hammershot kit with a 9KG spring. Let's see how the OMW kits stacks up when I am done.