Jump to content


Member Since 12 Oct 2007
Offline Last Active Aug 23 2012 10:08 AM

Topics I've Started

Rfdg Help

08 October 2009 - 07:10 PM

I recently modded an RFDG to look like the terrible shotgun from fallout. Only problem is, I can't get it to close, or when I do, the turret doesn't rotate. I've successfully closed RZB's on the first try, so I don't think it's a "getting things aligned" problem. Any help would be appreciated.

Homemade Bolt Action Rifle

02 August 2008 - 01:57 PM

I have nearly completed my homemade bolt action rifle. All I need to finish it is a coupler, as I need to connect the bolt/breech assembly to the plunger/catch assembly.
Posted Image
Bolt assembly:
Posted Image
Posted Image
Posted Image
Posted Image

Oh, and a vulcan!
Posted Image

At2k Quad Mod Writeup (pvc)

04 May 2008 - 10:53 AM

This mod is for noobs with taggers and vets with mega stefans. Without pump plugging, this gun can shoot around 60' with taggers, more probably with stefans and a pump plug. Without further adieu, the writeup.

You will need:
5/8 inch clear vinyl tubing (should fit in 1/2 inch pvc with some cramming)
Hot glue + gun
Tape of your choice
(Some pics are courtesy of Uncle Hammer)
Posted Image
Stock At2k. Open it up, fools!

Posted Image
Internals of the At2k.

Posted Image

Don't lose that o ring!

I don't think you need a picture for this, but cut your pvc to four pieces of seven inches.

Posted Image
Now carefully pry the stock barrels out. cutting leaves a ring inside that we don't want. Your turret should look like this when you're done.

Posted Image
Now take your clear vinyl tubing and cut one inch segments. I think everyone hear can imagine four one inch segments of this stuff.

Sorry I don't have a pic for this step, but cram the clear vinyl tubing halfway into each piece of pvc. then insert the other end of the clear vinyl tubin into the holes on the turret.

Add tape to hold the barrels together, plug the pump if you want, and close it back up.

Posted Image
Isn't it glorious?

Rubber Band Guns

04 May 2008 - 10:28 AM

Alright, before I started nerfing, I enjoyed making rubberband guns. These were not your average single-shot rubber band guns, no. These were heavy gatling gun turrets and automatic pistols. I have pictures, so take a look!
Posted Image
This is my automatic pistol. It shoots rather slowly but holds 25 rubber bands. Is a kickass sidearm.
Posted Image
My old rubberband primary. Holds 60 bands and fires crazy fast using a gatling type system.
Posted Image
A remake of my old primary. Holds 60 bands, fires faster, is lighter and smaller, and is my current band-war primary.
Hope you enjoyed!
If you have any questions, just ask.