Should have told me sooner, I think I've used about 1/4 of my plumber's goop on this project...
Gunblade Build
It's a Gunblade that actually fires unlike Squall's oversized
Started by b00m13, Jul 30 2007 07:52 PM
53 replies to this topic
#52
zaphodB
-
- Members
- 369 posts
Member
Posted 30 September 2007 - 10:08 PM
If you used the titan's internals, it wouldn't have meen the same at all. The valve systems are totally different, or at least the trigger mechanisms are. I would say if you've gone this far, totally custom build a tank, like a large-scale version of the hornet's tank.
Alice came to the fork in the road.
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."
#53
six-five-two
-
- Members
- 752 posts
Member
Posted 30 September 2007 - 10:34 PM
Well I am not going to simply take apart everything right now. I want to put it all together and see if this works. Then I'll buy a Titan (heads up n-strike) and make something out of that.
#54
six-five-two
-
- Members
- 752 posts
Member
Posted 01 October 2007 - 01:17 AM
Double post: For the second time, b00m13 and CaptainSlug was right. The pump makes the pressure too high for the new air tank, so I am going to make my gun like before with the titan pump and start a separate project with a Titan. I guess I learned the hard way.
Oh, and b00m13, 5 pumps with over pressure release valve is too much. 4 is the highest you can go without a leak.
Oh, and b00m13, 5 pumps with over pressure release valve is too much. 4 is the highest you can go without a leak.
Edited by six-five-two, 01 October 2007 - 09:15 PM.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
