Jump to content


Photo

Gunblade Build

It's a Gunblade that actually fires unlike Squall's oversized

53 replies to this topic

#51 six-five-two

six-five-two

    Member

  • Members
  • 752 posts
  • Location:Vancouver, B.C.

Posted 30 September 2007 - 10:05 PM

Should have told me sooner, I think I've used about 1/4 of my plumber's goop on this project...
  • 0

#52 zaphodB

zaphodB

    Member

  • Members
  • 369 posts
  • Location:Indianapolis, IN

Posted 30 September 2007 - 10:08 PM

If you used the titan's internals, it wouldn't have meen the same at all. The valve systems are totally different, or at least the trigger mechanisms are. I would say if you've gone this far, totally custom build a tank, like a large-scale version of the hornet's tank.
  • 0
Alice came to the fork in the road.
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."

#53 six-five-two

six-five-two

    Member

  • Members
  • 752 posts
  • Location:Vancouver, B.C.

Posted 30 September 2007 - 10:34 PM

Well I am not going to simply take apart everything right now. I want to put it all together and see if this works. Then I'll buy a Titan (heads up n-strike) and make something out of that.
  • 0

#54 six-five-two

six-five-two

    Member

  • Members
  • 752 posts
  • Location:Vancouver, B.C.

Posted 01 October 2007 - 01:17 AM

Double post: For the second time, b00m13 and CaptainSlug was right. The pump makes the pressure too high for the new air tank, so I am going to make my gun like before with the titan pump and start a separate project with a Titan. I guess I learned the hard way.

Oh, and b00m13, 5 pumps with over pressure release valve is too much. 4 is the highest you can go without a leak.

Edited by six-five-two, 01 October 2007 - 09:15 PM.

  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users