Jump to content


Photo

Longshot Carbine

A spectre arms product

53 replies to this topic

#26 General Cole

General Cole

    Member

  • Banned
  • 868 posts

Posted 07 June 2007 - 08:55 PM

I would cover the hole up with some craft foam or something of that nature.
We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34

You know what... I know it's kinda late... but Props Cole.
-Baghead

#27 Gengar003

Gengar003

    Member

  • Members
  • 187 posts

Posted 07 June 2007 - 10:10 PM

My turn to chip in.

A lack of barrel CAN hurt range, on very high-powered guns. My Titan, Airtech 2000, and Crossbow, for example. Without their barrels, they will blast the back, unweighted end of my stefans in circles, causing them to fishtail and spiral and hardly move forward at all. A barrel is necessary to channel the power of those guns in the right direction.

Nitefinder? Maverick? Magstrike? Crossfire, etc? It still hurts not to have a real barrel, but it's not as vividly apparent.

There's still ROOM in the Longshot carbine for a brass barrel replacement.
  • 0
I bought Kohls.com's last two AirTech 2000s.

#28 Fenixharth

Fenixharth

    Member

  • Members
  • 187 posts

Posted 07 June 2007 - 10:47 PM

well you can just have the barrle stick out the front of he gun if you want to add a brass or petg barrle to it.

also It isn't as simple as just takeing a hack saw to it.... ok it is but if you want to make it look good you have to have a little finess.
  • 0

#29 Oro

Oro

    Member

  • Members
  • 93 posts

Posted 07 June 2007 - 11:11 PM

It also looks danm sexy in my oppion.


That it does, that it does.

Anyways, nice mod! B) I wish I could do that, I lack experience. Is there a possibility of a write-up in the future?

All you do is saw the front off.

I meant do that, lose the ARs, replace the barrel, and make it shoot stefans. I can easily saw the front off. But I want to do more and that is the problem.
  • 0
QUOTE(deaddumpster @ Jun 25 2008, 04:59 AM) View Post

Don't pry.......and gently pry it off with a flathead screwdriver.

#30 OfAllTheNerf

OfAllTheNerf

    Member

  • Members
  • 714 posts

Posted 08 June 2007 - 01:32 PM

By doing this, there is no barrel, and it is extremely small and light.

I think that to make this a good rushing, or light, medium-rof, medium range weapon, one should not replace the spring with something very powerful. Possibly an EX-3 NF spring, to add just a bit more power.

The reason for this is in two parts.

One, unless you are rather strong, you cannot cock the LS with one hand (unless you have the foregrip), and thus you must take your hand off the handle and cock, put your hand back on, shoot, and so on. This slows down rof slightly, but that time may end up costing you in a Nerf war. Thus, having a weaker spring increases rof.

Two, since the barrel is non-existant, having a very strong spring would decrease accuracy. I don't know about all of you, but I would rather have a little less range, but have my weapon be more accurate.

This modification has the potentional of making the LS the perfect compact, powerful weapon. But it all depends on your playing style.

Edited by OfAllTheNerf, 08 June 2007 - 01:41 PM.

  • 0
[color=#FF6600][Finesse]-[BitchX]

#31 sam

sam

    Member

  • Members
  • 1,059 posts

Posted 08 June 2007 - 01:40 PM

I agree with that. I'm probably going to throw together one of these before I go off to college, It would be awesome for indoor wars, especially if you took off the stock, making it even smaller.
  • 0

#32 OfAllTheNerf

OfAllTheNerf

    Member

  • Members
  • 714 posts

Posted 08 June 2007 - 01:45 PM

I agree with that. I'm probably going to throw together one of these before I go off to college, It would be awesome for indoor wars, especially if you took off the stock, making it even smaller.


Yes, I forgot to mention it is perfect for indoor wars.

the stock would make it smaller, but in the picture it is already collapsed, and when it is off, it doesn't look as good, in my opinion. But aesthetics don't mean squat if it gets you killed (with foam, of course...)
  • 0
[color=#FF6600][Finesse]-[BitchX]

#33 camo

camo

    Member

  • Members
  • 40 posts

Posted 08 June 2007 - 03:23 PM

if there's a way to be able to take the clip out without half-cocking it (and making it easy for the clip to fall out), you could shotgun this, the grip would just slide under the clip.
  • 0

#34 Thom

Thom

    Member

  • Members
  • 759 posts

Posted 09 June 2007 - 02:20 AM

It looks like there's still some space in the front. Is there enough space to put in a shotgun foregrip? It might seem a bit silly on such a small weapon, but it looks like it might just fit, since it's after all a wholly external addition.
  • 0

#35 badger

badger

    The Walking Nerf-wiki

  • Members
  • 1,171 posts

Posted 09 June 2007 - 04:04 AM

It looks like there's still some space in the front. Is there enough space to put in a shotgun foregrip? It might seem a bit silly on such a small weapon, but it looks like it might just fit, since it's after all a wholly external addition.


If you are talking about CaptainSlug's shotgun foregrip, then no. The part of the gun that the grip uses as a guiderail is gone now when you cut the front of the gun off.
  • 0
As Carbon once said,

"The moment you can no longer see the fun in running around like a little child is the moment you begin to die."

Roses are FF0000
Violets are 0000FF

ALL YOUR BASE ARE BELONG TO US

#36 skate 4 life

skate 4 life

    Member

  • Members
  • 15 posts

Posted 09 June 2007 - 10:40 AM

nice clean mod. Where did you get all the longshots?
  • 0

#37 Fenixharth

Fenixharth

    Member

  • Members
  • 187 posts

Posted 09 June 2007 - 06:39 PM

well, i'm the weaponsmith for our group up here in my part of mass so yea... 16 people 8 longshots.
  • 0

#38 baseballnolan5

baseballnolan5

    Member

  • Members
  • 90 posts

Posted 09 June 2007 - 09:14 PM

It looks like there's still some space in the front. Is there enough space to put in a shotgun foregrip? It might seem a bit silly on such a small weapon, but it looks like it might just fit, since it's after all a wholly external addition.

Doing the shotgun foregrip would not work unless you stuck it way out in front of the gun. The pulling back motion would hit the clip.
  • 0
QUOTE View Post

QUOTE

About how much are you holding in the pictures on the spools?

A shit ton.

QUOTE(Langley @ Aug 6 2007, 05:41 PM) View Post

The shot hit Andy squarely in the forehead. He was, in fact, on my team.


#39 camo

camo

    Member

  • Members
  • 40 posts

Posted 10 June 2007 - 10:03 AM

not if you had enough clearance to go around the clip, and put in a hardpoint to steady it. it wouldn't be too hard to put a foregrip on there at all, the trouble would be getting the clip out
  • 0

#40 badger

badger

    The Walking Nerf-wiki

  • Members
  • 1,171 posts

Posted 10 June 2007 - 10:59 AM

not if you had enough clearance to go around the clip, and put in a hardpoint to steady it. it wouldn't be too hard to put a foregrip on there at all, the trouble would be getting the clip out


Then what is the point of adding the grip in the first place if it will make removing the clip harder? There is no purpose in adding a foregrip to this gun. It will actually defeat the purpose of cutting it down to reduce it's size. Here is a picture from the thread where CaptainSlug sells his shotgun foregrip showing where it rests at the front of the gun. Adding any type of hardpoint to be able to mount the foregrip would be pointless.

Posted Image


  • 0
As Carbon once said,

"The moment you can no longer see the fun in running around like a little child is the moment you begin to die."

Roses are FF0000
Violets are 0000FF

ALL YOUR BASE ARE BELONG TO US

#41 The Crackerjack Man

The Crackerjack Man

    Member

  • Members
  • 203 posts

Posted 10 June 2007 - 01:21 PM

I did this to my little brothers longshot about a month ago and he loves it. Hes alittle on the small side so it worked for him. I dont see any range drop but it isnt as accurate.
  • 0
"Wow, you realy screwed that guy over"

#42 Scotch

Scotch

    Member

  • Members
  • 179 posts

Posted 20 July 2007 - 02:08 PM

I agree with SirTofu (I know this post is a little late).

I really like the Black and Red paint job on one of them.

You could also try a different material for the clip.
  • 0
QUOTE(VACC @ Jan 24 2008, 10:21 AM) View Post
Woah, woah, slow down there buddy. If you put it ALL in your mouth at once you're just gonna gag and get it all over the carpet.

#43 n-strike

n-strike

    Member

  • Banned
  • 358 posts

Posted 20 July 2007 - 04:16 PM

If you know it's a little late, then why even post? This topic is over a month old.
kthxbaisend

#44 Willz

Willz

    Member

  • Members
  • 12 posts

Posted 28 June 2008 - 09:27 PM

I love this mod and all but your black longshot is very nice!
  • 0
92% of teens have moved on to rap.
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature

#45 CrazyIvan VI

CrazyIvan VI

    Member

  • Members
  • 295 posts

Posted 28 June 2008 - 11:04 PM

*facepalm*

Read the damn date before you post, especially something pointless like that.
  • 0
I get all giddy when I see VACC browsing a stupid topic. I just know someone is going to get banned.

#46 Omega

Omega

    Member

  • Members
  • 287 posts

Posted 28 June 2008 - 11:41 PM

Mother of Christ, every time I log on there's another fucking necro!

This is getting out of hand.
  • 0
QUOTE(Vishamon)
My rule is that those wearing a thong are considered to be invisible to other players.


#47 Foam Shooter

Foam Shooter

    Member

  • Members
  • 212 posts

Posted 28 June 2008 - 11:44 PM

I love this mod and all but your black longshot is very nice!

You have to read the code of conduct.

Code of Conduct

Think Before You Post

Don't post unless you have something to say.

Avoid AIM-style (lol, u, ne, ppl, etc) spelling.

Avoid 1337-speak - s0 |_@m3.

Use capitalization and punctuation correctly.

Don't double-post - use the edit button.

Don't post in months-old topics unless you have something significant to add.

Don't ask questions that have been answered already - use the built-in search function and try Google first.


Acceptable Post Content

No Pr0n links or images.

No spam.

Stay on topic.

No plagiarism.

No pointless flames.


Creation of multiple accounts will result in deletion of all accounts.


Your Posting Privileges

If you break any of the above rules, the NerfHaven staff can, and very likely will, delete your account with little or no warning. If you repeatedly troll or spam on this forum I will personally ensure that your Internet access is terminated within two (2) working days.

There, I made it easy for you. I hope this isn't plagiarism. It's irritating have such old topics on the first page of the forums.

Edited by Foam_Shooter, 28 June 2008 - 11:59 PM.

  • 0

#48 najmodder0424

najmodder0424

    Member

  • Banned
  • 112 posts

Posted 05 December 2008 - 11:34 PM

[quote name='zaphodB' date='Jun 7 2007, 03:01 PM' post='109901']
[quote name='AJAQ' post='109888' date='Jun 7 2007, 11:02 AM']

(Ever heard of a sawed off combustion loser rifle? Me neither.)


hope that clarifies what I attempted to say earlier.
[/quote]

If by what you attempted to say was sn iper rifle, then point made. whoever thought of replacing sn iper with loser was a genius.

I know this is nerf but in the military the sni per is one of the most feared and respected positions. I personally decide to become one some day if I enlist instead of trying to go to West Point. Just sayin', don't diss losers. :mellow:

Edited by najmodder0424, 05 December 2008 - 11:41 PM.

You can discover what your enemy fears most by observing the means he uses to frighten you.

-Eric Hoffer (1902-1983)

Rabbit + Hunting Bullet from a hunting rifle = exploded rabbit

#49 lonshotparty

lonshotparty

    Member

  • Members
  • 4 posts

Posted 06 December 2008 - 12:07 AM

Nice Dude Nice :mellow: :lol:
  • 0
Head Meet BOOMSTICK!!

#50 bogboogalars

bogboogalars

    Member

  • Members
  • 398 posts

Posted 06 December 2008 - 12:13 AM

Sweet mother of Jesus, naj-whatever, this topic has been necro'd before and now you go and post in it after 6 months. And on top of that there's even a direct COPY AND PASTE of part of the CoC right in the post above yours... I ask you: Are you looking to get banned?
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users