8 replies to this topic

[PvtMcFlurry]

Alright. I know this is going to sound retarded because I've been a member for a long time now. But can someone post me to a decent link to a NF Coupler Mod? I can't seem to figure out how to attach my coupler to the actual gun itself. Thanks in advance.

~McFlurry

[CaptainSlug]

http://nerfhaven.com...ic=5229&hl=at2k

Glue the coupler to the peg piece as usual.





Then cut the body shell a good deal so the coupler will fit. I don't bother putting couplers on pistols.

[monkey with a nf]

I don't know about a specific mod, but I would glue the coupler to the orange piece at the end of the plunger, after getting rid of the original barrel and the restrictor. You would just have to dremel/sand out the front of the casing to make it fit.

EDIT: Whoops, CS posted while I was typing.

Edited by monkey_with_a_nf, 03 June 2007 - 01:18 PM.

[blister]

Or you can cut a small piece of your barrel material and glue that to the orange piece then glue the coupler to that. You wont have to trim the body shell if you do this.

It should look like Gengar's At2k: http://nerfhaven.com...6&hl=my arsenal

Edited by blister, 03 June 2007 - 01:26 PM.

[OfAllTheNerf]

I just put the coupler straight onto the plunger chamber. I made sure it was straight before letting it dry. But if you're putting a PVC coupler on, then it might not work. I put a CPVC coupler in the PVC one, so it acts like a plunger stop.

I agree with CS, don't put couplers on pistols (I'm going to stop), just put a barrel on 'em. You could probably just jam the dart down the barrel with your finger, if you have small fingers, or long darts, or a little of both.

-OfAll'

[Gengar003]

I just completed "the best" coupler mod I've ever seen on a friend's nitefinder... Maybe it's just me, but I liked it so much I am going out (right after I finish typing this, in fact) to buy at least one more nitefinder of my own and do that to it.

I will of course take pictures along the way and post a writeup - so if you haven't been satisfied by any of the answers yet, hang on just a while longer.

Note: I use 1/2" CPVC + 1/2" CPVC couplers, so if you're looking for something else, you'll have to do a little creative interpretation.

[PvtMcFlurry]

I just completed "the best" coupler mod I've ever seen on a friend's nitefinder... Maybe it's just me, but I liked it so much I am going out (right after I finish typing this, in fact) to buy at least one more nitefinder of my own and do that to it.

I will of course take pictures along the way and post a writeup - so if you haven't been satisfied by any of the answers yet, hang on just a while longer.

Note: I use 1/2" CPVC + 1/2" CPVC couplers, so if you're looking for something else, you'll have to do a little creative interpretation.

Exactly what I'm looking for. Please post A.S.A.P please. Thanks Gengar.

[Gengar003]

Here you go, good sir.

[PvtMcFlurry]

Here you go, good sir.

Thanks a lot.