Jump to content


Photo

Nf Coupler Mod Question?

Yes I've Searched

8 replies to this topic

#1 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 03 June 2007 - 01:07 PM

Alright. I know this is going to sound retarded because I've been a member for a long time now. But can someone post me to a decent link to a NF Coupler Mod? I can't seem to figure out how to attach my coupler to the actual gun itself. Thanks in advance.

~McFlurry
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#2 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,761 posts

Posted 03 June 2007 - 01:16 PM

http://nerfhaven.com...ic=5229&hl=at2k

Glue the coupler to the peg piece as usual.

Posted Image
Posted Image
Posted Image

Then cut the body shell a good deal so the coupler will fit. I don't bother putting couplers on pistols.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#3 monkey with a nf

monkey with a nf

    Member

  • Members
  • 110 posts

Posted 03 June 2007 - 01:17 PM

I don't know about a specific mod, but I would glue the coupler to the orange piece at the end of the plunger, after getting rid of the original barrel and the restrictor. You would just have to dremel/sand out the front of the casing to make it fit.

EDIT: Whoops, CS posted while I was typing.

Edited by monkey_with_a_nf, 03 June 2007 - 01:18 PM.

  • 0
QUOTE(Pineapple @ Sep 12 2007, 03:13 PM) View Post

For maximum efficiency?


1. Pump up. Count how many pumps.

2. Keep going until you hear a loud "bang".

3. Subtract one pump from the total. Rebuild your air bladder.


There you go.

#4 blister

blister

    Member

  • Members
  • 207 posts
  • Location:Bay Area, CA

Posted 03 June 2007 - 01:25 PM

Or you can cut a small piece of your barrel material and glue that to the orange piece then glue the coupler to that. You wont have to trim the body shell if you do this.

It should look like Gengar's At2k: http://nerfhaven.com...6&hl=my arsenal

Edited by blister, 03 June 2007 - 01:26 PM.

  • 0
Subvert the Dominant Paradigm.

#5 OfAllTheNerf

OfAllTheNerf

    Member

  • Members
  • 714 posts

Posted 03 June 2007 - 01:54 PM

I just put the coupler straight onto the plunger chamber. I made sure it was straight before letting it dry. But if you're putting a PVC coupler on, then it might not work. I put a CPVC coupler in the PVC one, so it acts like a plunger stop.

I agree with CS, don't put couplers on pistols (I'm going to stop), just put a barrel on 'em. You could probably just jam the dart down the barrel with your finger, if you have small fingers, or long darts, or a little of both.

-OfAll'
  • 0
[color=#FF6600][Finesse]-[BitchX]

#6 Gengar003

Gengar003

    Member

  • Members
  • 187 posts

Posted 03 June 2007 - 03:13 PM

I just completed "the best" coupler mod I've ever seen on a friend's nitefinder... Maybe it's just me, but I liked it so much I am going out (right after I finish typing this, in fact) to buy at least one more nitefinder of my own and do that to it.

I will of course take pictures along the way and post a writeup - so if you haven't been satisfied by any of the answers yet, hang on just a while longer.

Note: I use 1/2" CPVC + 1/2" CPVC couplers, so if you're looking for something else, you'll have to do a little creative interpretation.
  • 0
I bought Kohls.com's last two AirTech 2000s.

#7 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 03 June 2007 - 03:58 PM

I just completed "the best" coupler mod I've ever seen on a friend's nitefinder... Maybe it's just me, but I liked it so much I am going out (right after I finish typing this, in fact) to buy at least one more nitefinder of my own and do that to it.

I will of course take pictures along the way and post a writeup - so if you haven't been satisfied by any of the answers yet, hang on just a while longer.

Note: I use 1/2" CPVC + 1/2" CPVC couplers, so if you're looking for something else, you'll have to do a little creative interpretation.


Exactly what I'm looking for. Please post A.S.A.P please. Thanks Gengar.
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#8 Gengar003

Gengar003

    Member

  • Members
  • 187 posts

Posted 03 June 2007 - 05:56 PM

Here you go, good sir.
  • 0
I bought Kohls.com's last two AirTech 2000s.

#9 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 03 June 2007 - 06:48 PM

Here you go, good sir.


Thanks a lot.
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users