Materials
1.crossfire
2screwdriver(du)
3.electrical tape
4.hot glue gun and glue sticks
5.about 6-inches of half inch cpvc
6.a better longer and wider spring
i got this from a scout mod on nerfhq and someone had suggestid it.
first thing you do is open up the gun. then you take the exsiting barrel and do what ever you want with it except take the o-ring of before you do what ever you want with the barrel.
cut a piece of electirical tape about a foot long and cut two strips that are each about 1/4 of the tape.
take 6 inches of cpvc (i think) and on the end wrap 1 of the 12 inche pieces of electrical tape and wrap it around the cpvc about a quater of an inch from the end.
then take the o-ring and put it on the cpvc and slide it to the end with the electrical tapeon it .then wrap the other piece of tape on the other side of the o-ring leaving enough space that it does not touch both pieces of elecctrical tape at the same time.
Add some lubricant and slide it into the plunger making sure that their is a good seal between the o-ring and the plunger.
This is the hard part unless you have 2 people. hot glue the cpvc to the gun at where the barrel emerges from the casing and close it back together
Sorry i dont have any pictures but i am in maui right now for spring break
i dident have any type of tape mesurere but my shoe is 12 inchs so i just used my feeet and the ranges were with dart tag darts about 60 feet and with stefans the got up to 87!!!!!!!!
now before anyone critisies me and says its impossible to get 87 feet with a crossfire i had a spring that was 1/3 longer and 1/2 size wider.
i will be able to get pictures up maybe in 1/2 weeks
this is my crossfire mod enjoy
-doomforu
Edited by doomforu, 27 March 2006 - 11:34 AM.