5162 replies to this topic

[bigred1rifleman]

Chaos Black, Boltgun Metal, and Goblin Green, I'll add some purple later today (because it REALLY REALLY REALLY NEEEEEEEDDDSSS it)

Finn

Edited by bigred1rifleman, 20 August 2009 - 09:49 PM.

[white moonlight]

My modified Berserker:





Mods done:
Counterweights to balance out the front heaviness.
I shaved down the plate, that was stopping the springer plunger
chamber from moving closer to the turret.
PETG'd the turret.
PVC couplered the big blast.
Replaced O-ring.
Lubed up the plunger tube.

Ranges:
The big blast 100-110
The springer 45-55

That's all.

For any questions on how to replicate this mod feel free to PM me.

Edited by white moonlight, 22 August 2009 - 11:51 AM.

[Merzlin]

MODULATION HELL YEA





90'.

[TantumBull]

Inspired by Merzlin's awesome modified glue gun, I made this:



With the RSCB it's hitting mid 60's. Not bad for a pistol. Now you're probably wondering how it works. Hidden from view by the coupler is actually a miniature one of these:

The pictured fan is the kind you'd put atop a woodstove. That's right, the heat from the glue gun spins the fan which pushes air forward. The glue gun has been modified to heat up instantly so that air gets moving very quickly. Right now I'm working on a way to make it cordless. For now I just plug it into a power source to make the gun fire.

Another pretty unique blaster set-up. I couplered my mouth.


With the singled barrel and a good dart/barrel fit it gets upper 70's to low 80's. It works by using a burst-disk valve set-up from a paintball marker so that it releases once I've built up sufficient pressure in my lungs.


Also, here's my new stock attachment to my Raider, it houses extra springs:

[mystefansdontflystraight]

Hey everyone. I was suspended for two months, but I was by no means inactive during that time. Here is what I was working on, minus my rear loading 1500, a mega missle, and some other small stuff:


Rear loading, spring replaced. Went to Merzlin.

Single'd, PETG'd LS with AT2k. Painted with games workshop paints. LS gets 85-90ft flat, 2k gets maybe 10ft less.

Angel breeched. This is an outdated photo, this one is now pump action. Used it at SCANO2. Gets anywhere from 85-95ft. I have hit 120ft with it on one occasion, I have not been able to do it again.



Shitpas. CPVC coupler. Plunger draw extended. Pullback. Xbow spring addition. Meh. I don't really use it, but it hits around 100ft.

[BritNerfMogul]

And so the work begins......



*evil laugh*

[jerm78]

I got 126 feet out of this before it broke. Making repairs now.

The wood rod split also.

Edited by jerm78, 24 August 2009 - 01:30 AM.

[princexbuster]

Damn, it's been a while since I've visited the Haven.
Also BritNerfMogul just looking at that makes me feel funny in my pants.
Anyway, this is what I've been up to.


The breach is a little to long so it'll need cut down to get better range.


Any questions?


This thing works like a dream! The tek6 is definatly more gooder than the maverick in this situation. This will definatly get some bondo to make it look pretty but I got a new girlfriend and I've been somewhat destracted.

Edited by princexbuster, 25 August 2009 - 12:11 PM.

[bigred1rifleman]

Franken-Mag-3k with an over sized RSCB, I'll shorten it later.



Almost done. Oh yeah, and when the third shot didn't fire in that video, it was a REALLY horrible dart, not the gun.

Finn

Edited by bigred1rifleman, 25 August 2009 - 05:07 PM.

[Collective]

So I FINALLY get to post in this topic! Sorry for the crappy pic, but my camera is sick so I had to use my phone.



At the top is my version of the excellent K9 Special. It has a 7 1/2 inch barrel of 17/32 brass. The clip is 19/32 brass with a 5/8 section that slides over it to close the breech. It's pretty much awesome, though when I used it at the exSOF Topeka war I noticed that it always seemed to shoot right for the face...though that might not have been the gun....

Below that is my decrapified Mega Missile. I 86'd the shell and added a lsfg handle to the bottom of the pump. The lsfg trigger is attached to a keyring attached to the trigger valve of the Mega Missile. I just finished it today and I love it!

AAAAND, below that are my three gnarly Nightfinders. Nothing super special, the same kind everybody has.

Edited by Collective, 26 August 2009 - 01:36 AM.

[gszwabowski]

I just took my brothers Max D 6000 and put a coupler on it.

Gets 90'-100', optimum pumps is about 60 or 70.

[Lt Stefan]

My Big Blast, utilizing the CLB, which is on sale here.

[Glint]

I love this thing.



RFDG spring replacement, AR removal and a DiscShot spring in the stock. Oh, and some padding on the end of the plunger rod and where the plunger tube hits the bolt sled.
Plus a comfortable shoulder strap held on with bolts and washers:

Edited by Glint, 26 August 2009 - 03:17 PM.

[orogomi ninja]

Mandalor's Call




The Mandalorian Symbol (Jaing Head)



For more on Mandalorians-Mandalorians

[cheesypiza001]

Check out THIS thread for more details.

[RVMVTVProductions]

Other side.

I know that there is at least one person thinking, "InvAsian, how the fuck are you pumping air into that Big Blast?"

I have a 2K pump in there attached to the stock bolt, which is not pictured above. But it is below:



Barrels are all 1/2 CPVC, I did a variant on AssassinNF's "Longshot back from the dead", integrated the 2K pump (which, unfortunately, takes 55-ish pump due to reduced pump stroke to fill the Big Blast, but I only pump it twenty times to make it useful), shotgun loaded the doubled Big Blast, blah blah blah.

Sorry for the bad first two pics, my camera wasn't focusing and the flash wouldn't turn off.

[Renegademilitia15]

PINKY AND THE BRAIN

[Icespartan 1114]




Breeched TTG. Gets amazing ranges. Picked this up yesterday at Target. Inspired by Madmax and coop.

Edited by Icespartan_1114, 28 August 2009 - 02:44 PM.

[Lt Stefan]

A CPVC breech on my RFS. They are for sale here



I get about 100' flat. Deadly accurate. As in hitting a 1" diameter dot from 40' in my basement. I think it's the best barrel for springers.

Edited by Lt. Stefan, 28 August 2009 - 08:30 PM.

[Icespartan 1114]

A work in progress.




CPVC'd Maverick. All it needs now is a new catch and the reinforcement bar in the slide.

[Seven7h Man]

My collection
















Made a Chimera


Sorry if the're too big, I don't know how to re-size images.

[Cappy]

Looks awesome. Great idea

Edit: My account has been suspended for posting in thie thread without an original paintjob or modification pic. I'm retarded.

[Coop]

Normal LS stuff with a Raider drum magazine.


CPVC RFSG


CPVC Firefly


AT3K with an RSCB clip. Pump replaced and plugged, goo gauge removed. 90-100' flat.

[Lt Stefan]

Reinforced side cockers. 1.5 49 spring. PETG breech, and stock dart barrel. With ammo holders too.

Edited by Lt. Stefan, 31 August 2009 - 10:25 PM.

[ace of nerf]