5162 replies to this topic

[archangel24]

SM750, 1/2" PETG nested in conduit, barrel is too long, testing out length for breech.

Because


Overhauled Sharpshooter I, 10" PETG barrel nested in conduit with 2"stub of 17/32".

Because


White Out NF with 1" PETG PT, 1/2" polyester barrel(too long), and full compression [k26] with nylon plunger rod.

[Sam-underscore]

UT themed commission rapidstrike

Vinyl dye paintjob, resistors removed, locks removed, and 3 ultrafires.
Shell was welded so it has two holes in the side(anyone know a better solution than drilling?)

The two brothers

[CRCL]

Some modding I did this week to stave off the boredom:

Stryfe/roughcut masterkey. Somewhat impractical, but still awesome.


Minimized Rapidstrike; I kept the stock as I feel it balances the baster out a bit and makes one-handed use easier.

[Duke Wintermaul]

Here is the album, the integration is 100% mechanical.

[Deathbynature]

Showcasing Chris's LED mods on a Maverick and Stampede.

[Deathbynature]

and Matt's BBUMBstrike.

[dog green 1]

Been busy at the bench.

[nzh1998]

Xplorer Fighter Kit LS + Stippled Shotgun grip

Stippled Grip for extra grip


Main Blaster!

[Ice Nine]

Prepped some stuff for the SCUN war next weekend.

Fixed my rear-loading SM1500; the old pump's check valve failed so I replaced the pump tube and redid the tank-to-turret seal. Paint by Baghead.







I fixed a SuperMaxx 500 that I had lying around. I am surprised the SM500 works now, given the terrible shape of the internals. It's a fun blaster.




I cleaned up the Sceptor that I bought from TED, and secured the stock using a screw. You can disassemble the tank system and re-lube the stopper mechanism which is convenient. I painted it, too, in a manner befitting of a faux-paintball blaster. The pump grip is a trap joint.

[Aldegar]

Mininmized Rapidstrike and Stryfe both voltage modded with rc batteries

[Aldegar]

Detachable masterkey

[Jaynerf176]

Mag-shot, a Magnus Longshot integration.
to be painted when I'm home on break.
Sorry for the crappy picture

[charlie156]

My Completely Modified 1995 Nerf Kenner Crossbow with Integrated. Homeade Internals (plusbow sized plunger tube, 3/8 nylon rod, roboman custom aluminium lathed plunger head, [k25], 1/4 inch polycarb for main pull back plate with wood screws and vinyl tubing spacers for 1/8 inch polycarb pull, AT3K with AT2K pump, with screws covered in vinyl tubing as a pump stop, 1/8 reinforcement plates up front to distribute for properly, epoxy puddy extended trigger, epuddy handle modification mold to make more comfortable) Perfect seal, half inch conduit PVC coupler for the AT3K and reducer bushing for the Crossbow.





Finished 3B. Universal coupler, 1/2 inch conduit PVC with 1/2 inch CPVC endcap with back dremaled out nested inside to make Universal coupler, completely straight, perfect seal, industrial Canadian spring, shorter then [k26] by a bit, but about 1.5 times stronger, hole drilled into plunger rod to keep plunger head and spring rest plate on the actually plunger rod, hot glue in the "skirt" part of the original seal, re greased. stronger catch spring, and strong side... spring this... the things that keep the 3B primed until you pull trigger.

[Sam-underscore]

The #swagcannon 3000. The swaggiest 3K to ever exist. Mods done: hornet pump replacement, PETG barrels, paintjob, rear-loading, and green goo-gauge. Also the back fake tank says YOLO for the lols



My 'retalicon', a clear recon shell with retaliator internals and a 5kg spring. Used 1/8" polycarb for the spring stop

Edited by Sam-underscore, 26 February 2014 - 07:35 PM.

[BritNerfMogul]

Mine's bigger than yours...

[Majestic]

Retaliator pump with OMW stages 1,2, and 3

[arekin]

Not completed, need the brass for an Angel Breach and some metal plates to reinforce the bolt sled, trigger catch, and the back of the plunger tube. The sweet revenge is complete.

[skeptiker]

Firefly-Styled Jaguar-based Prop - not quite confident with the plates which are holding the barrel:

[Bryneverostasia]

Here are some recent flywheel projects.

First up is my RapidStrike with underslung Swarmfire; It has a blowgun for HVZ events
Mods include:
Full Rewire
9.6V, 1600mAh NiCad Battery for the RS
7.2V, 2200mAh LiPo Battery for the Swarmie; internally housed above the pusher mech
SlyDev Rail on the bottom of the Swarmie for a foregrip





Second up is my personal take on a Strayven;
Mods include:
Full Rewire
180 Elite Blade Motors
7.2V, 2200mAh LiPo Battery housed internally just between the rear of the Stryfe and Rayven magwell.




Something else I threw together:



Rapidstrike stock attachment using an old Spectre rear piece; Super solid. It is no longer adjustable, but it is adjusted perfectly for me (5'11")

[Aeromech]

The Terrible Tornado. Writeup here

[popatachi]

Inspired from MiG's work with cutting boards, I decided to make a LS pump grip. See it in "action"

Edited by popatachi, 17 March 2014 - 08:50 PM.

[Boris99]

For a while I had an old longshot with a terrible black paint job from when I was little. So for obvious reasons it needed a new look. I did no prep work at all, I just grabbed some spray cans. It came out as a super-duper fantasticle fustercluck of fun and rainbows, and that is why I call it the "Pop-Tart Rifle".

Edited by Boris99, 24 March 2014 - 11:18 PM.

[Aeromech]

Based on an antiaircraft gun. No writeup for this one. Stampedes running 18V each, with cut-down big bad bow springs powering the blasters. Video coming soon.

[dog green 1]