Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4676 archangel24

archangel24

    Member

  • Members
  • 215 posts
  • Location:Louisville
  • State:Kentucky
  • Country:United States

Posted 05 February 2014 - 05:59 PM

Posted Image
SM750, 1/2" PETG nested in conduit, barrel is too long, testing out length for breech.
Posted Image
Because

Posted Image
Overhauled Sharpshooter I, 10" PETG barrel nested in conduit with 2"stub of 17/32".
Posted Image
Because

Posted Image
White Out NF with 1" PETG PT, 1/2" polyester barrel(too long), and full compression [k26] with nylon plunger rod.
  • 0
QUOTE(Talio @ Oct 14 2010, 10:37 PM) View Post

I would much perfer a game that's free of KY. I like it rough. Right, Vacc?

"She went all Ghetto Fab on you."

#4677 Sam-underscore

Sam-underscore

    Member

  • Members
  • 89 posts
  • Location:Panhandle Area
  • State:Texas
  • Country:United States

Posted 05 February 2014 - 09:20 PM

UT themed commission rapidstrike
Posted Image
Vinyl dye paintjob, resistors removed, locks removed, and 3 ultrafires.
Shell was welded so it has two holes in the side(anyone know a better solution than drilling?)

The two brothers
Posted Image
  • 0
You want Homemades? I make Homemades.
~le yootoob

#4678 CRCL

CRCL

    Member

  • Members
  • 18 posts
  • Location:Perth
  • State:Western Australia
  • Country:Australia

Posted 07 February 2014 - 12:53 AM

Some modding I did this week to stave off the boredom:

Stryfe/roughcut masterkey. Somewhat impractical, but still awesome.
Posted Image

Minimized Rapidstrike; I kept the stock as I feel it balances the baster out a bit and makes one-handed use easier.
Posted Image
Posted Image
  • 0

#4679 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts
  • Location:Dayton
  • State:Ohio
  • Country:United States

Posted 14 February 2014 - 01:18 AM

Posted Image

Here is the album, the integration is 100% mechanical.
  • 0

#4680 Deathbynature

Deathbynature

    Member

  • Members
  • 11 posts
  • Location:Australia

Posted 14 February 2014 - 05:13 AM

Showcasing Chris's LED mods on a Maverick and Stampede.

  • 0

#4681 Deathbynature

Deathbynature

    Member

  • Members
  • 11 posts
  • Location:Australia

Posted 14 February 2014 - 05:20 AM

and Matt's BBUMBstrike.

  • 0

#4682 dog green 1

dog green 1

    Member

  • Members
  • 21 posts
  • Location:Stockton-on-tees
  • Country:United Kingdom

Posted 14 February 2014 - 05:09 PM

Been busy at the bench.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0

#4683 nzh1998

nzh1998

    Member

  • Members
  • 3 posts
  • Country:Singapore

Posted 15 February 2014 - 08:34 AM

Xplorer Fighter Kit LS + Stippled Shotgun grip

Stippled Grip for extra grip
Posted Image

Main Blaster!
Posted Image
  • 0

#4684 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts
  • Location:West LA
  • State:California
  • Country:United States

Posted 16 February 2014 - 01:36 PM

Prepped some stuff for the SCUN war next weekend.

Fixed my rear-loading SM1500; the old pump's check valve failed so I replaced the pump tube and redid the tank-to-turret seal. Paint by Baghead.

Posted Image


Posted Image


I fixed a SuperMaxx 500 that I had lying around. I am surprised the SM500 works now, given the terrible shape of the internals. It's a fun blaster.

Posted Image


I cleaned up the Sceptor that I bought from TED, and secured the stock using a screw. You can disassemble the tank system and re-lube the stopper mechanism which is convenient. I painted it, too, in a manner befitting of a faux-paintball blaster. The pump grip is a trap joint.

Posted Image


Posted Image
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#4685 Aldegar

Aldegar

    Member

  • Members
  • 25 posts
  • Location:Gig Harbor
  • State:Washington
  • Country:United States
  • u/Aldegar1 on Reddit

Posted 19 February 2014 - 09:15 PM

Posted Image
Posted Image
Mininmized Rapidstrike and Stryfe both voltage modded with rc batteries
  • 0

www.tacticoolfoam.com

Custom nerf guns and nerf modification kits

 


#4686 Aldegar

Aldegar

    Member

  • Members
  • 25 posts
  • Location:Gig Harbor
  • State:Washington
  • Country:United States
  • u/Aldegar1 on Reddit

Posted 21 February 2014 - 07:53 AM

Posted Image
Detachable masterkey
  • 0

www.tacticoolfoam.com

Custom nerf guns and nerf modification kits

 


#4687 Jaynerf176

Jaynerf176

    Member

  • Members
  • 55 posts
  • State:New York
  • Country:United States

Posted 26 February 2014 - 01:48 PM

Mag-shot, a Magnus Longshot integration.
to be painted when I'm home on break.
Sorry for the crappy picture

Posted Image
  • 0
I do reviews and mod guides, check them out here: https://www.youtube....jtOQo09ejo7bHnQ

#4688 charlie156

charlie156

    Member

  • Members
  • 89 posts
  • Location:ottawa
  • Country:Canada

Posted 26 February 2014 - 02:53 PM

My Completely Modified 1995 Nerf Kenner Crossbow with Integrated. Homeade Internals (plusbow sized plunger tube, 3/8 nylon rod, roboman custom aluminium lathed plunger head, [k25], 1/4 inch polycarb for main pull back plate with wood screws and vinyl tubing spacers for 1/8 inch polycarb pull, AT3K with AT2K pump, with screws covered in vinyl tubing as a pump stop, 1/8 reinforcement plates up front to distribute for properly, epoxy puddy extended trigger, epuddy handle modification mold to make more comfortable) Perfect seal, half inch conduit PVC coupler for the AT3K and reducer bushing for the Crossbow.
Posted Image
Posted Image
Posted Image


Finished 3B. Universal coupler, 1/2 inch conduit PVC with 1/2 inch CPVC endcap with back dremaled out nested inside to make Universal coupler, completely straight, perfect seal, industrial Canadian spring, shorter then [k26] by a bit, but about 1.5 times stronger, hole drilled into plunger rod to keep plunger head and spring rest plate on the actually plunger rod, hot glue in the "skirt" part of the original seal, re greased. stronger catch spring, and strong side... spring this... the things that keep the 3B primed until you pull trigger.
Posted Image
Posted Image
  • 0

#4689 Sam-underscore

Sam-underscore

    Member

  • Members
  • 89 posts
  • Location:Panhandle Area
  • State:Texas
  • Country:United States

Posted 26 February 2014 - 07:07 PM

The #swagcannon 3000. The swaggiest 3K to ever exist. Mods done: hornet pump replacement, PETG barrels, paintjob, rear-loading, and green goo-gauge. Also the back fake tank says YOLO for the lols
Posted Image
Posted Image

My 'retalicon', a clear recon shell with retaliator internals and a 5kg spring. Used 1/8" polycarb for the spring stop
Posted Image
Posted Image

Edited by Sam-underscore, 26 February 2014 - 07:35 PM.

  • 0
You want Homemades? I make Homemades.
~le yootoob

#4690 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 559 posts
  • Location:Merseyside, UK
  • State:England
  • Country:United Kingdom

Posted 27 February 2014 - 02:27 PM

Mine's bigger than yours...
Posted Image
Posted Image
Posted Image
  • 0

#4691 Majestic

Majestic

    Member

  • Members
  • 57 posts

Posted 03 March 2014 - 04:11 PM

Retaliator pump with OMW stages 1,2, and 3

Posted Image

Posted Image

Posted Image

Posted Image
  • 0

#4692 arekin

arekin

    Member

  • Members
  • 32 posts
  • Location:47303
  • State:Indiana
  • Country:United States

Posted 03 March 2014 - 07:41 PM

Posted Image

Not completed, need the brass for an Angel Breach and some metal plates to reinforce the bolt sled, trigger catch, and the back of the plunger tube. The sweet revenge is complete.
  • 0

#4693 skeptiker

skeptiker

    Member

  • Members
  • 16 posts
  • Country:Germany

Posted 04 March 2014 - 06:10 PM

Firefly-Styled Jaguar-based Prop - not quite confident with the plates which are holding the barrel:

Posted Image
  • 0
Nerf props made in Germany since 2011

#4694 Bryneverostasia

Bryneverostasia

    Member

  • Members
  • 14 posts
  • Location:Denver
  • State:Colorado
  • Country:United States
  • u/irishknots on Reddit

Posted 04 March 2014 - 07:41 PM

Here are some recent flywheel projects.

First up is my RapidStrike with underslung Swarmfire; It has a blowgun for HVZ events
Mods include:
Full Rewire
9.6V, 1600mAh NiCad Battery for the RS
7.2V, 2200mAh LiPo Battery for the Swarmie; internally housed above the pusher mech
SlyDev Rail on the bottom of the Swarmie for a foregrip

Posted Image

Posted Image

Second up is my personal take on a Strayven;
Mods include:
Full Rewire
180 Elite Blade Motors
7.2V, 2200mAh LiPo Battery housed internally just between the rear of the Stryfe and Rayven magwell.

Posted Image


Something else I threw together:

Posted Image

Rapidstrike stock attachment using an old Spectre rear piece; Super solid. It is no longer adjustable, but it is adjusted perfectly for me (5'11")
  • 0

#4695 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts
  • NerfHaven Supporter
  • Location:Long Island
  • State:New York
  • Country:United States
  • Aeromech on Youtube

Posted 15 March 2014 - 01:34 PM

Posted Image


Posted Image

The Terrible Tornado. Writeup here
  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#4696 popatachi

popatachi

    Member

  • Members
  • 206 posts
  • Location:M
  • State:Massachusetts
  • Country:United States

Posted 17 March 2014 - 08:45 PM

Inspired from MiG's work with cutting boards, I decided to make a LS pump grip. See it in "action"

Posted Image

Posted Image

Posted Image

Edited by popatachi, 17 March 2014 - 08:50 PM.

  • 0

#4697 Guest_TheSilverhead_*

Guest_TheSilverhead_*
  • Guests

Posted 17 March 2014 - 09:09 PM

Cybran just got finished.
Posted Image
Posted Image

  • 0

#4698 Boris99

Boris99

    Member

  • Members
  • 28 posts
  • Location:Berthoud, Colorado
  • State:Colorado
  • Country:United States

Posted 17 March 2014 - 10:32 PM

For a while I had an old longshot with a terrible black paint job from when I was little. So for obvious reasons it needed a new look. I did no prep work at all, I just grabbed some spray cans. It came out as a super-duper fantasticle fustercluck of fun and rainbows, and that is why I call it the "Pop-Tart Rifle".
Posted Image
Posted Image

Edited by Boris99, 24 March 2014 - 11:18 PM.

  • 0
I like apples!

#4699 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts
  • NerfHaven Supporter
  • Location:Long Island
  • State:New York
  • Country:United States
  • Aeromech on Youtube

Posted 23 March 2014 - 11:54 PM

Posted Image

Posted Image

Based on an antiaircraft gun. No writeup for this one. Stampedes running 18V each, with cut-down big bad bow springs powering the blasters. Video coming soon.
  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#4700 dog green 1

dog green 1

    Member

  • Members
  • 21 posts
  • Location:Stockton-on-tees
  • Country:United Kingdom

Posted 24 March 2014 - 12:45 PM

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users