Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4451 2TAGS

2TAGS

    Member

  • Members
  • 250 posts

Posted 23 May 2013 - 09:15 PM

Camo Barricade rev-10.
All locks removed , volt meter installed on back end cap, D.I.Y. GLOW IN THE DARK add on, 9 volt conversion.

Posted Image

Posted Image
  • 0

#4452 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 24 May 2013 - 08:56 PM

She's all done. This is my air compressor powered sceptor. Works beautifully.

So far, I have only taken her up to 50 psi. It takes about 12 seconds to get there and I can fire off about 6 good shoots.

I don't care (if you ate sceptors and air compressor powered blasters... especially combined) I love it.

Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4453 DartSlinger

DartSlinger

    Member

  • Members
  • 222 posts

Posted 25 May 2013 - 10:53 PM

I came across this post by Ice Nine, and it inspired me to try out some long-exposure, no-flash night shots. In this case, I used a dark room. I varied the amount of lighting and the shutter speed (I even went up to fifteen seconds), and I came up with some excellent shots. These kind of photos give you much more focus on all aspects of the subject than flash photos do, so even if your blaster is angled, you still get very clear photos. If you are wanting to try out photos like these, give it a whirl. You may have to use a quality camera, though. Mine is a Nikon D40, which is a DSLR. You will also have to play around with the settings such as aperture and especially shutter speed.

Posted Image

I modified this Lanard First Shot quite a long time ago.

Posted Image

Posted Image

As you can see in the above photos, a shorter shutter speed gives more clarity in details such as writing on the blaster and shadows made by it. A longer shutter speed (Up to a certain point, that is. After that it just start becoming progressively more washed out.) makes truer colors on the blaster, but lacks a slight amount of detail in shadows and writing. Unfortunately, Photobucket robbed my pictures of some of their clarity, so you can't really see the shadows anymore. It is a shame that almost, if not all photo hosting sites compress your photos. They basically cut out light and detail to minimize the photo's size.

Posted Image

Posted Image

Posted Image

I really like this type of photography: it gives better focus, and there is no glare on the subject from the flash.

Edited by DartSlinger, 25 May 2013 - 11:04 PM.

  • 0

#4454 sodizzle3113

sodizzle3113

    Member

  • Members
  • 66 posts

Posted 26 May 2013 - 12:04 AM

Gave my failure of a hoppered LongShot some loving the last few days.
Posted Image
It uses the boltsled and the original priming handle to push the barrel assembly backwards.
Posted Image
The return spring is inside the blaster and the boltsled is bolted through the wye and the cpvc.
Hopefully it holds.

Comments/questions are always nice in a PM
  • 0

#4455 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 26 May 2013 - 12:13 PM

I found an untouched Nitefinder in my box o' Nerf, and it is now no longer stock.
Posted Image

CPVC barreled, party popper spring + stock spring, AR removed, seal improvements. I tried to keep it as stock looking as humanly possible. I was expecting the usual maybe 60 feet, but this one surprised me..... it's got to be getting at least 75 feet. It left welts on me at close range from Elite darts.
  • 0
There is no such thing as overkill. There is only cost efficiency.

#4456 snickers

snickers

    Member

  • Members
  • 241 posts

Posted 27 May 2013 - 08:59 PM

Posted Image
I just need to paint the other shell and do some touch ups to this one.

Edited by snickers, 29 May 2013 - 05:59 PM.

  • 0

#4457 hummer

hummer

    Member

  • Members
  • 217 posts

Posted 28 May 2013 - 11:48 PM

So I've finally made my Bolter done:

Posted Image

Posted Image

Posted Image

Writeup here: http://www.nerfrevol....php?f=8&t=6000

(Selling it if you're in the mid-west, 9 pounds is not fun to ship)

Made purity seals for it:

Posted Image

Also made a small shield to use too!

Posted Image

Edited by hummer, 29 May 2013 - 10:16 PM.

  • 0
Into the fires of battle!
Onto the anvil of war!
QUOTE(BustaNinja @ Nov 23 2010, 04:09 PM) View Post

He parkours over flat land while yelling tactical orders at no one. Demon Lord is the most legit ballsy nerfer of all time.

#4458 Birch

Birch

    Member

  • Members
  • 181 posts

Posted 29 May 2013 - 06:01 AM

[img]http://[IMG]http://i1308.photobucket.com/albums/s602/birchnerfer/Photoon2013-05-29at0642_zpsc736246f.jpg[/IMG][/img]
[img]http://[IMG]http://i1308.photobucket.com/albums/s602/birchnerfer/Photoon2013-05-29at06422_zpsdc9b9152.jpg[/IMG][/img]
[img]http://[IMG]http://i1308.photobucket.com/albums/s602/birchnerfer/Photoon2013-05-29at06432_zpsa9f18e72.jpg[/IMG][/img]

I based this splat on Blitz's here http://nerfhaven.com/forums/index.php?showtopic=5250&st=3765
MIne has a few changes. Mine is using 1 1/4 in thinwall pvc for the plunger, everything is also mechanically fastened, and it houses a k45+K31 combo up in the front. This ridiculous spring power, coupled with the already diddle spring in the blaster, allows it to hit upwards of 95 feet.

Edited by Birch, 29 May 2013 - 05:55 PM.

  • 0

It's like a Hurricane ate a Tornado and shat out a Monsoon!!


#4459 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 29 May 2013 - 02:47 PM

Cleaned up that same UMB with a shorter, 3D printed rail.

Posted Image
  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#4460 TheWiredDJ

TheWiredDJ

    Member

  • Members
  • 51 posts

Posted 29 May 2013 - 04:49 PM

Assault-style Stampede commission:

Posted Image

The Long(er)Strike / Elite Longstrike / RetalStrike / Whatever you like to call it. Modded Retaliator internals spliced into a longstrike.

Posted Image
  • 0

Used to commission Nerf guns I guess.

Gallery/Blog.
Facebook page.


#4461 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 29 May 2013 - 04:54 PM

Posted Image
Whilst hunting zombies at night during https://www.facebook.../DarkTempusLarp, I discovered a slight problem with my retaliator, in that to use my torch I either had to lose my vertical grip or lose my sight. So I went all COD on it and fixed it.
QUAD RAILS BABY!
Posted Image
Posted ImagePosted Image
Posted Image

Edited by BritNerfMogul, 29 May 2013 - 04:59 PM.

  • 0

#4462 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 30 May 2013 - 05:50 PM

Oooooo.

Long live Crossbows.


Posted Image

Posted Image

I'm about 5 years late to this party... YOLO!

Posted Image

Posted Image

Name: #CarpeYOLOSwag420_MLG_2Legit2Quitbow
Mods Done: Level 5 (You've probably never heard of it before).
Integrations: +Bow, Mad Swagger, Dildo.
Ranges: Farther than your Crossbow.

Comments: After neglecting my Crossbow for close to two years, I finally decided to modify it for war use. The archived modifications for Crossbows are largely subpar for actual war use. I looked to Coop's recent Crossbows and started from scratch with similar techniques.

A common problem with replacing the plunger tube on a Crossbow is that a +Bow sized plunger tube (1.5" OD) is slightly too large for the shell, leaving a 1/8-1/4" gap. This has lead to smaller plunger tube replacements to avoid this gap, with losses in range and hopperability.

Fuck that, I went with the +Bow plunger tube. With adequate additional screws this gap can be closed across the shell quite easily.

Securing the plunger tube into the shell was accomplished by two screws in the rear spring rest of the plunger tube. This bypasses the need for a screw through the front bushing, and by proxy the need for a plunger tube housed entirely within the shell. This allowed me to achieve a greater length of draw with a +Bow length of plunger tube (11 and 1/2 inches); A tad over 6 inches of draw.

Before I started this project I debated the practicality of modifying a Crossbow in this day and age of the NIC community. I doubted whether or not it would fill a useful niche along with my +Bow or pump-action dick guns.

It does. It shoots as far if not farther than my +Bow, is mad comfortable, compact, and obviously swagnificent. If anybody ever tries to tell you that Crossbows are overrated, they're wrong. So very, very wrong.

Edited by Xellah, 30 May 2013 - 06:16 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#4463 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 31 May 2013 - 05:38 PM

Posted Image

How we do it on the Beast coast.
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#4464 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 31 May 2013 - 09:50 PM

Elite Alpha Trooper
Posted Image

Retaliator
Posted Image

FireFly
Posted Image

POON - We're better than you and we know it.
Posted Image

Edited by Coop, 05 June 2013 - 06:27 PM.

  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#4465 MightyAP

MightyAP

    Member

  • Members
  • 5 posts

Posted 31 May 2013 - 10:48 PM

Modified Longshot front gun. CPVC barrel, fires stefans 60-70 feet.
Posted Image
  • 0

#4466 Jaynerf176

Jaynerf176

    Member

  • Members
  • 55 posts

Posted 04 June 2013 - 01:18 AM

The Drop-Mav, a removable turret Maverick
Posted Image

Posted Image

Posted Image
  • 0
I do reviews and mod guides, check them out here: https://www.youtube....jtOQo09ejo7bHnQ

#4467 LinkMT

LinkMT

    Member

  • Banned
  • 91 posts

Posted 04 June 2013 - 06:03 PM

Just a simple PT replaced NF. Just decided to throw it out there.

Posted Image
JACK OFF TOEFUCK REVEREND ASS CHUNK

#4468 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 04 June 2013 - 06:12 PM

Splatter paint Strongarm
Posted Image

Posted Image

Drop clip Strongarm
Posted Image

Singled Big Blast
Posted Image
  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#4469 archangel24

archangel24

    Member

  • Members
  • 215 posts

Posted 05 June 2013 - 12:33 AM

Cutting it close don't you think LinkMT with the crotch shot? We don't need that type of money shot here.

Slytherin style Maverick
Posted Image
Posted Image
Posted Image

Loving these things
Posted Image
Got just over 9 coils of [k26] in each, not about to let them break....
Posted Image

Edited by archangel24, 05 June 2013 - 12:42 AM.

  • 0
QUOTE(Talio @ Oct 14 2010, 10:37 PM) View Post

I would much perfer a game that's free of KY. I like it rough. Right, Vacc?

"She went all Ghetto Fab on you."

#4470 hydro cannon kid

hydro cannon kid

    Member

  • Members
  • 35 posts

Posted 05 June 2013 - 08:28 PM

Hello everyone this Is my Big salvo tank nesting alpha trooper I think it may be the first of its kind. There is full wright up on my agenda so that will be up some time.


  • 0

#4471 Guest_BrianSTR_*

Guest_BrianSTR_*
  • Guests

Posted 06 June 2013 - 09:15 AM

My first paint job
Posted Image

Posted Image

Edited by BrianSTR, 06 June 2013 - 09:15 AM.

  • 0

#4472 MightyAP

MightyAP

    Member

  • Members
  • 5 posts

Posted 06 June 2013 - 11:24 AM

Posted Image
Posted Image

Recon pump action mod.......works quite nicely & goes through the 18 dart clip in bout 15 seconds.

Edited by MightyAP, 06 June 2013 - 11:33 AM.

  • 0

#4473 Chuck

Chuck

    Member

  • Members
  • 6 posts

Posted 07 June 2013 - 07:46 AM

Pair of blasters for a customer before
Posted Image
The pair after.

Posted Image
Posted Image
Customer wasn't thrilled about the blue so it got changed to black

Posted Image
after that first one this my second creation The scope didn't survive, the weight threw off the slide action.
Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
I did the AR removal MOD and the extended swing out mod
Posted Image

Thanks for viewing
-Chuck
  • 0

#4474 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 07 June 2013 - 08:05 AM

Hey gang! Luckily we've had a long summer here in Middle Earth and I managed to work in a few more PJs before the full onslaught of winter.

A Halo 4 railgun-inspired Rayven:
Posted Image
Posted Image

Edited by Tigadee, 07 June 2013 - 08:09 AM.

  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#4475 McRawrz

McRawrz

    Member

  • FNG1 
  • 1 posts

Posted 08 June 2013 - 12:33 AM

Posted Image

Posted Image
First paintjob [though unfinished], any feedback is awesome
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users