5162 replies to this topic

[kevne]

I've been Busy recently, working on 5 commissions at once. 4 of these were for the same guy and here they are.









All very standard stuff. I am particularly proud of the two LSKs he had. One was black and green (pictured) and the other was black and grey. Both sporting my flashy aluminium priming handles.

[Randel]

My first time using a spray paint.. It's not so bad either
I sanded it for a matte look and used plain black since it is a loser and should be "stealthy".

Also, the bolt action is a little harder than before. I FAILED.

Buzz Bee Air Warriors Range Master

[shoangore]

Here are some things I've made. I only have my Rayven left, everything else has been sold.



FrankenRifle, non-firing combination of two broken rifles. Created as a prop for Sakuracon. Houses 16 AA batteries in the magazine, 2 cold cathode tubes and 1 LED array.



Small blaster



TRON style Alpha Trooper. Features low top-rail with MBUS F/R sights, 300 Lumen adjustable floodlight. Tennis tape added to grip.


TRON style (rampage? I forget). Features MBUS F/R sights, Eotech 556 holo sight, and later on an additional 300 lumen adjustable floodlight as well. Tennis tape added to grip.


The siblings posed together!


Had extra paint and misc stuff so I had fun with my Scout



My Rayven, has flashlight integration, turns on with the switch added to the side. Backup 6-dart magazine clip holder added as well (removable). Custom rail added to the top to allow for MBUS F/R sights and Eotech 556.

Enjoy! My next project will be the Stryfe SCAR-H conversion.

[TheRunningDafini]

Hey all, Finally got my 3D Printer running and have made a couple of shell pieces for one of the guns I got.
Basing off of the Halo Magnum for this particular design

Despite the clunky look, the gun fires through the shell cleanly.
So far that is two pieces printed out of the Solidoodle, and they slot together pretty well.
Currently attempting to print some tubing so I can hopefully design some custom nerf guns. Printed one already that ended up being a point of a millimetre too thick, as in the nerf dart was juuust unable to fit in.
Honestly making a LOT of use out of this printer, so much I have just ordered more filament from my constant use.

Edited by TheRunningDafini, 27 December 2012 - 07:17 PM.

[roboman]

Rearloading 2K for Korned. 12" PETG barrels, rearloading, aluminum tank. Shoots hard, even with my foam that doesn't fit well in PETG.

[Eraser475]

Here's some stuff I got done the last few days:

[andtheherois]

Two modded firestrikes. One was CPVC couplered, and the other one was perma-breeched. Increased the draw by moving the plunger further forward, added a [k26] to both, retained the old priming handle, replaced the plunger rod, minimized. The breeched one will be my personal pistol, the couplered one will be a loaner. Fits well in a (slightly) modified holster.

[ilikefish58]

pSyk, I love you.

[Funky Mutha Facko]

Here are a few of my most recent mods.

The Triad needed something more, a finishing touch if you will. So here are a few pics of the triad sporting a little bit-o-tacticool.







The Firestrike with minimization and cosmetics using the scrap shell plastics.


Sharpshooter II re-barreled and plunger tube replaced Expand a Blast (EAB)



Holds a full [k26], delrin plunger rod, aluminum spacers and a bolt for the handle.



In all its glory


Hope you enjoyed

[Nerfomania]

[ilikefish58]

Super soaker shot blast in a hornet shell.





Edit: Also, fixed up the seal on the T3k and made a polycarb trigger for it.

Edited by ilikefish58, 06 January 2013 - 08:42 PM.

[snickers]

Got this AT4K for $20 shipped. The auto-rotation mech was perfect when I got it. It has the works. It took me 3 hours to fully over haul it.

[MattTheSasquatch]

My latest blaster, the PioneerShot (named and painted after the college I am attending):



Mainly stock except breech has been bored to fit Elite Darts, dart peg removed, and stock block.

[Draconis]

Possibly the lamest and most ridiculous mod ever... But I just wanted to see if it would shoot. It does. The only mod is the addition of the rocket barrel, but it will still fire a rocket about 30 feet. Woo!

[HOTH]

[k26] in a polycarb tube spring housing



17/32 Brass breech, still accepts clips.



Replaced plunger tube, aluminum plunger rod



Replaced catch



It is currently primed up top, but that is getting kinda difficult



Hoping to switch things up



No paint job intended. Very practical blaster, ranges well over 80'. Works flawlessly with modded n-strike clips.

[quertyman]

This is my very first post in the mods thread, so here it goes.

First and probably least, my panther, just cpvc couplered and upgraded spring oprv.


Next up my octo shot. Roatation wasnt working so I just too it out so it is manual spin. I still have the rotation piece though. Also no idea why the barrels look crooked but they aren't.


next all of my airtechs. 5 3k and 3 2ks (2 2ks not pictured). All in the process of being overhauled.


My rfsg in the pricess of becoming a DOOMSAYER. Also a cpvc couplered minimized nitefinder.


Big salvo. Nothing special, just tips chopped off and pex tube shoved in it. I dont really want this thing so pm me if you are interested in buying it.


My two large volume airguns (excluding the next picture). My mavtitan. Has a small leak but it works. Also my UMB. The coupler is wayyy too loose which makes me mad. These both run off the same pump which is removable.


Now my most favorite mod I have done so far (may change with the 3ks though). My Buzz Bee Big Blast. done in SVT4B mk2 style. OPRV cracks at about 10 which is obviously changable. Hopper holds around 8 of my beige slugs. Has a 16" britthopp petg barrel on it. And the pump and hopper was very cleanly put in.

Edited by quertyman, 10 January 2013 - 11:29 PM.

[Pointman9]

After finally getting myself a Retaliator, I noticed two things. One, it's almost built for conversion to pump action, and two, the stock is way too damn small.


The stock may look a little long... but I just have really long arms. It fits just right XP

Other side, I decided to paint this side. I'm not sure why.

[mysterio]

Works like a charm.

[ilikefish58]

[atomatron]

Got a Rough Cut.

Tediously removed the pegs but maintained these nubs so the mechanism would still work



Decent blaster IMO, those Elite darts are just as inaccurate as steamlines judging from the 8 that it came with.

[MattTheSasquatch]

My new Firestrike.
As well for anyone who didn't know, the blaster grip handle is actually detachable with only three clip locks on each half of the shell, thus making for some better paintjobs and possibly the easiest one to paint.

[Nerfomania]

Greydon's SplatterPAS got a mini-me.



-Polycarb PT, think Draw-reduced NF Rifle here.
-Skirt seal (probably overkill...)
-HD spring

Getting about 70-75' out of it, the skirt is a tad bit tight. Should last a Long time though.

[Coop]

Pump action Longshot





Roughcut



Firestrike

[kevne]

My latest commission.



LED integration.



Extensive weathering.

[2TAGS]

Titan hyperfire with basketball pump and every addon i could find "thrift" shopping

Edited by 2TAGS, 16 January 2013 - 10:57 PM.