5162 replies to this topic

[iamthatcat]

Sooo much fun with shotgun loads. Tweaked my coupler/turret design a bit for power.



Magstrike integration tester/experiment.

[noodlenoggin]

This is my first post and first attempt at painting one of my Nerf blasters. I went for a simple army style with my lsfg.
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.

side 1
lsfg1

side 2
lsfg2

the front view(ish)
lsfg3

[noodlenoggin]

This is my first post and first attempt at painting one of my Nerf blasters. I went for a simple army style with my longshot front gun.
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.

side 1


side 2


the front view(ish)

Edited by noodlenoggin, 31 January 2012 - 08:48 PM.

[Z64052187]

Recon with Longstrike forend, PVC "tightbore", lighted handguard (incomplete), AR removal, and paintjob (also incomplete)

Edited by Z64052187, 31 January 2012 - 08:30 PM.

[Eik]

Finished my "Nomad" NF
- CPVC coupler
- 'iamthatcat'-style integration
- SSPB in the handle
- Tactical stickers





Probably gonna repaint it something cooler

Edited by Eik, 09 January 2014 - 12:04 AM.

[Ambience 327]

Here is my modded Buzzbee Flintlock:



The write-up can be found right here.



Cost: $10.88 ($8.99 blaster, $1.54 springs, $0.25, $0.10 worth of Goop)

Time: Roughly 1.5 hours

Stock Ranges: 17'-22' (19' average)

Mods Done:
barrel replacement (CPVC endcap "coupler" for CPVC speed loaders)
spring addition
catch spring replacement

Modded Ranges:
Stock Darts: 25'-30' (27' average)
Slug Darts: 30'-35' (32' average)

[eklios]

the first stage of my tri barrel mav (first mod ever)

[Eik]

Batch of Reflex's/Eliminator for xmas gifts







Painted the internals of my Red+ Maverick



Tuned up my Recon

Edited by Eik, 09 January 2014 - 12:15 AM.

[TagMaster247]

Enjoy!!!

Edited by TagMaster247, 02 February 2012 - 09:17 PM.

[ilikefish58]

http://www.youtube.com/watch?v=5uiOFt-xww0

[Eraser475]

What my nitefinder...



...looks like under a blacklight:

[iamthatcat]

5 shot Jolt. It uses a light .8", looser fitting dart. It loads from the front. The 5th shot is a stroke of luck that worked when I tried shoving an extra (tight fitting) dart down the barrel. Ranges are 35',32',25',20' & 10' over grass (stock spring).


The nano is more consistent. My best, last shot (Rogue spring) landed at 24'.


Early pic of the wye.


Jolt tweaks.

A start on the sights for a Tek 3 turret. The curve added to the back of the turret allows you to prime with the o-ring exposed a bit, to get a better gulp of air & better range. The missile adapter is a piece of polyester(?). It was packing materials. The skeletonized trigger & barrel crenelation helps with aim.

This shows the removal of the stock back plate. It's slimmer & can be useful for integrations. Clear orange vinyl tubing & a shoelace for priming. Shaped up coupler. The small front profile/trigger is nice in the hand.


Turreted NF. Seal needs work.

Edited by iamthatcat, 15 February 2012 - 08:09 PM.

[andtheherois]

Berserker for a friend



Semi-auto Salvo for Hoongfu



Twins, One's not so pretty cause the coupler was done by someone else and replaced by me. The other one was 100% stock when I received it, and was quickly modded for a Keo.


Two Double Shots I did for a friend for a Zombie walk. They're in my possession once again to be minimized further. A lot of work went into detailing them and making them look worn and used.

[ilikefish58]

[thespankerlives]

Edited by thespankerlives, 13 February 2012 - 10:48 PM.

[Eik]

Work in progress. Might make a write-up when it's complete.

Edited by Eik, 09 January 2014 - 12:08 AM.

[roboman]

(Finally) finished a 2K overhaul, complete with aluminum tank, for NerfNoob10.





It has the works - aluminum tank, coupler, speedloader, and pump head. I've taken it to 12 pumps so far and the tank has held up fine. It seems to like 7-9 pumps, for some reason. Of course, that means it's ridiculously powerful, too. Haven't had a chance (and won't get one) to test ranges, but it punches through cardboard easily.

[iamthatcat]

Whoa! ^

Breeched and externally banded NF. The bands didn't give me too much range. I already had a strong spring. It did increase dart speed and accuracy. It finally got me to 100' too. A knot holds the bands to the priming rod. The priming rod is shaped to a sort of notch to hold the bands. I added foam and cloth tape to cushion both the priming rod and to keep the bands breaking. The cleat is CPVC. The front sight is the chopped up barrel from the stock NF (it works by clipping on).




Here's an SSPB with a NF grip following Solscud007 & Demolution from SGNerf.




Concept for the UMB pistol courtesy of Lein and his Switch Shot/SM 1500! Here is a pic of his in a beta stage. Mine is exaclty the same so I feel he should get the credit for this idea.



BB USB/BB UMB tank. 2 pumps gets 90' with stefans. Needs a new trigger and ergo tweaks but it's a lot of fun in a small package!




Unconventional? Maybe. Fuzzy pic? Yes. I have to sink the USB handle into the URB. I wanna try an air powered URB next!

Edited by iamthatcat, 04 March 2012 - 02:59 AM.

[BOSS9]

Finally got off my ass and took some pictures of stuff.


NiteFinder with 1 1/8" ID 1 1/4" OD plunger tube. 3" of draw, perfect everything, hits 110 with either the breech or the 9" speedloader. Not pictured: hours of dremeling and sanding the inside of the shell.


UMB. Actually my most reliable backup primary, it's a fucking rock. Shoots as far as my big blast currently, or as far as you want it to with the twist of a screw.


Soo fun. Tactical rail accessory that shoots farther than anything I can put it on? Hell yes!

[Eik]

Dropped OneWingedAngel's brass breech and polycarb catch into my 'Dino' longshot.





EDIT: Big ups to my lil Bro Eik2, I'm glad I finally got him to post that ShmexBow. No, he's not some poser FNG, we're actually related, and he did all that work himself!

Edited by Eik, 08 January 2014 - 11:52 PM.

[nomad01]

Hope this works as I have no idea how to post pics here and there's nothing in the help file for the computer chalenged like me. These are pics of my modded praxis. I did the usual stuff on the inside so nothing new there. On the outside I got rid of the shotgun action in favor of a bolt action that I made useing a screw driver & so 2 part epoxy puty, mounted a modded secret strike with a 3 barrel turret from some Buzzbee blaster on the now free underside of the paxis' barrel, kit bashed 2 10 disc clips to make a 25 disc clip, made a 6 round N-strike clip into a 6 round railmounted ammo holder & gave the shell a paint job. I'm going to try to posts the pics I took bellow, if this doesn't work could some one please let me know how to go about posting pics? Thank you, nomad.

[Ice Nine]

Skeptorr. Ropes. Mod party. Scrt.












That barrel is way too short. Needs like fourteen inches of SCH80.

The only glue on the gun is on the bushing.

Super productive!

[Eik2]

Here's my newly finished Shmallow bow. 1/2" PVC coupler, currently with a 9" Genova CPVC barrel. It has about 70 cu. in. of plunger volume. Stock internals otherwise, hits 100' with streamlines and about 110' with stefans.
::Edit:: This is my first post, and one of my first projects. I am the younger brother of Eik, if anyone was wondering.

Edited by Eik2, 26 February 2012 - 02:51 PM.

[SonReeceSonJensen]

[quote name='Eik2' timestamp='1330283756' post='311893']
I am the younger brother of Eik, if anyone was wondering.
[quote]

I WAS! So thank you for that. Come to Marchtacular. Just sayin' cuz you'll seeeee.....

THIS!


Oh yeah.


Drink in up.


Drink it ALL up.


Some specs on the TacMantaThreek





JB Weld and hardware. Get to know them, make friends with them.

[Smokin Joe]

First real post, my most recent NF. Has an extra spring that I found lying on my workbench.
Side Shot:

Front (with ammo holder hot glued in):

Money shot(and yes it is on a tie, I found it stood up very easily on it):

Edited by Smokin Joe, 26 February 2012 - 11:45 PM.