Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3601 WicketTheModder619

WicketTheModder619

    Member

  • Members
  • 247 posts

Posted 21 March 2011 - 04:47 PM

A recon I made for short range and indoor wars.

Right side-
Posted Image

On the reverse-
Posted Image

Nf spring in the powerstock-
Posted Image

The top slide of the eliminator with a tactical rail piece screwed in for a custom and comfy grip-
Posted Image

But wait....what's that in the handle-
Posted Image

Good times in zombie rounds.
  • 0
23:06 Buffdaddy: As long as they aren't doing it all night, don't care.

#3602 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 21 March 2011 - 05:02 PM

Arrowstorm.
Posted Image
Posted Image

Pearson PTEG is a perfect tight fit in the stock barrels. All I have to do is remove the "just-in-case" e-tape and give a yank to be able to fire arrows.

Going to mess around with different springs for this, when I can finally bring myself to stop playing with it.
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#3603 ahtanie

ahtanie

    Member

  • Members
  • 80 posts

Posted 22 March 2011 - 01:16 AM

Brit, I fixed it!
From this:
Posted Image
Posted Image

To this:
Posted Image
Posted Image
  • 0

#3604 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 22 March 2011 - 07:42 AM

Posted Image

Posted Image
(replaced by the top one)

Posted Image
matching NF

Posted Image

Posted Image
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#3605 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 22 March 2011 - 01:24 PM

I painted it iron man.

Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#3606 landstricker

landstricker

    Member

  • Members
  • 209 posts

Posted 22 March 2011 - 04:02 PM

My PAS:

Posted Image

Added [k26], reinforced the triger spring, 19/32 brass to remove the dead space.
  • 0

#3607 Nano

Nano

    Member

  • Members
  • 8 posts

Posted 22 March 2011 - 06:45 PM

Posted Image
My first full mod. Nothing big :/
  • 0
Double stuffed

#3608 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 23 March 2011 - 09:25 AM

Stampede
Posted Image

Matching Maverick
Posted Image

LED Longshot with a polycarbonate priming grip.
Posted Image

LED Longshot #2
Posted Image

Big Blast under-gun system (designed to fit under a +bow using mounting holes cut in the side plates). Still needs a new pump grip.
Posted Image
Posted Image

Edited by Coop, 23 March 2011 - 09:30 AM.

  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#3609 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 24 March 2011 - 04:23 PM

POOOOOOOOON STOOOOOOOOOOOOORM!!!

Posted Image

Posted Image
  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#3610 Lucian

Lucian

    Member

  • Members
  • 446 posts

Posted 25 March 2011 - 06:05 PM

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Maxshot ranges. Bam.
  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#3611 ahtanie

ahtanie

    Member

  • Members
  • 80 posts

Posted 26 March 2011 - 12:11 PM

Firefly turet:
Posted Image

Posted Image

Hopper clip:
Posted Image

Posted Image
  • 0

#3612 SonReeceSonJensen

SonReeceSonJensen

    Member

  • Members
  • 662 posts

Posted 26 March 2011 - 09:33 PM

A contract piece (and payment) for my old boss who wanted to liven up her new office.
Posted Image

Details.
Posted Image

Lots of details.
Posted Image

One more pose.
Posted Image
  • 0
The Difference:
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people

I do not play with guns.

#3613 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 27 March 2011 - 12:36 AM

NF shell, minimized for Noodle, in the way he requested:

Posted Image
Posted Image
Posted Image

I may or may not have received these (pure deliciousness)...

Posted Image

Edited by Kid Flash, 27 March 2011 - 12:42 AM.

  • 0

#3614 Edible Autopsy

Edible Autopsy

    Member

  • Members
  • 84 posts

Posted 29 March 2011 - 03:52 PM

That, my friends, is a diddle-ified Mega Missile, Supa tank expansion, and a PVC "shell"
I only use shotgun attatchments on this.

Posted Image

Posted Image

With Cerberus I just recieved in the mail.

Posted Image

Moneyshott!

Posted Image
  • 0
Hot glue is my best friend.

#3615 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 30 March 2011 - 08:15 AM

Posted Image


Pump-replaced, tank-expanded UMB with an internal wye.
  • 0
Fugly is a feature.

#3616 popatachi

popatachi

    Member

  • Members
  • 206 posts

Posted 30 March 2011 - 08:26 AM

Overhauling an AT3K and found a way to secure the pump without using any glue. There are two pump spacers made from thinwall PVC. The one in the back has a notch for the tubing. The stock pump was cut open to allow the hornet pump to fit through. the hornet pump was wrapped in electrical tape to keep it centered.

Posted Image

Posted Image

Edit: Still thinking of good ideas for the shell
Posted Image

Here's an overview video: youtube link

Edited by popatachi, 01 April 2011 - 11:15 AM.

  • 0

#3617 GeshmanWG

GeshmanWG

    Member

  • Members
  • 82 posts

Posted 30 March 2011 - 10:41 PM

Hoppered Hand Cannon with stock.
Posted Image

PT replaced NF (replacement plunger rod coming soon)
Posted Image

Ahh were's the PT. . . oh yeah, that right, its PETG.
Posted Image
  • 0

#3618 SonReeceSonJensen

SonReeceSonJensen

    Member

  • Members
  • 662 posts

Posted 31 March 2011 - 01:56 PM

This guy right here I found in my friend’s room where it stayed since his brother threw it in the street and ran over it with his bike. You can see some battle damage to the shell, plus the internals were shot…and the plunger tube cracked…and various plastic parts fell off…

Whatever, I worked on it’s resurrection!
Posted Image

I am very proud of the PJ, one of my faves so far.
Posted Image

My first attempt with the wax paper method for stencils I’d say was a success and has allowed me to explore untapped depths on my nerdyness.
Posted Image

Side note: I lost the plunger head in the process and have no desire to craft a homemade one so here is the best looking corpse in the NIC!
  • 0
The Difference:
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people

I do not play with guns.

#3619 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 02 April 2011 - 04:44 PM

1.) Pump.

2.) Aim.

3.) LIKE A BOSS.

Posted Image

Posted Image

The 4JAX.

Edited by Ice Nine, 02 April 2011 - 04:46 PM.

  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3620 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 02 April 2011 - 08:59 PM

Patriot Pistol Splat: It has been through many wars in the past 2+ years and has never broken. It is couplered with a section of a 2K pump for less shell rapeage and to prevent losing the CPVC speedloader.

Posted Image

Posted Image

Quadshot: Hurriedly couplered before a war. Improved seal, added spring. I prefer to use it with a hopper, I find it much better than the turret.

Posted Image

Not quite a mod, but still interesting. What is this hanging from my vent?

Posted Image

My Aunt sent me this mesh organizer with a note saying "To store nerf stuff in?" Seeing as how it is too weak to hold anything of substantial weight, I decided to use it for storing alternative ammo. It's niiiiiice.

Posted Image

Edited by venom213, 02 April 2011 - 09:00 PM.

  • 0

#3621 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 15 April 2011 - 02:28 PM

Let's get this thing jumpstarted. Here's the SpritzSplat with a SorrowX Turret:

Posted Image


  • 0
Fugly is a feature.

#3622 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 15 April 2011 - 03:02 PM

Posted Image

Posted Image
  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#3623 Spud Spudoni

Spud Spudoni

    Member

  • Members
  • 321 posts

Posted 15 April 2011 - 03:11 PM

Well, after finally getting a new video camera, then realizing it took pictures, I can finally upload pictures and video easily. Expect more of my shit.

To start, here is my PAS with a CPVC speedloader. Universal Coupler, [k25]. Ranges are about 97' with good darts.
Posted Image
Trigger and Priming Bar were made by Louie. He makes great stuff.
Posted Image
And because I hate when all of you guys do this, MONEY SHOTZ YO!
Posted Image
Yeah, eat that.
For shits and giggles, I put on a flashlight. Works well too.
Posted Image
From the front:
Posted Image
With the light on:
Posted Image
  • 0

industrial designer


#3624 KitAdrian

KitAdrian

    Member

  • Members
  • 39 posts

Posted 15 April 2011 - 04:49 PM

I present the KingSlayer MkI. (The joke there is that my roommate's last name is King. This is specifically to pester him.)

Posted Image

Right now, it's running with an unbanded Magstrike Bladder, A Clippard MAVO3 valve, and a Hornet Tank. The concept works. Semi-Auto Tri-Mav with Lever Action Cylinder advance.

Unfortunately, even with a straw to direct the flow of air and a foam turret seal, the Hornet tank just doesn't have enough OOMPH to do anything more than poop the darts out of the front of the gun.

So now I'm waiting for a Salvo Tank to up the power on the front end, and eventually I'll band the MagBladder to up the pressure on the back end.

The great thing about this setup is how well the Magstrike handle nests in the Maverick Handle. There is no glue holding them together, just holes drilled through the Mag handle to go around the lowermost posts in the Mav Handle; despite that, the pump/bladder assembly is SOLID.
  • 0

#3625 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 16 April 2011 - 01:07 AM

That's pretty nifty KitAdrian.

Put the grip of a DS on my new Raider and painted it to match.
Posted Image
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users