Modification and Paintjob Pictures
#3276
Posted 21 August 2010 - 11:01 PM
Best rail accessory ever.
Flower Power, my ladys 4B.
Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.
Canadian Nerfers-R.I.P.
#3277
Posted 22 August 2010 - 04:02 AM
@ SonReeceSonJenson - Sadly I don't. I use some cycling glasses with replacable lenses so depending on my mood depends on which lenses I use. Most of the time I use the yellow lenses.
And to keep the thread on topic:
#3278
Posted 23 August 2010 - 02:10 PM
#3279
Posted 23 August 2010 - 05:01 PM
Contract for Louie, Overhauled 1500.
New record times for 1500 turrets thanks to the new belt sander. The whole turret only took 20 minutes to do, minus time spent waiting for epoxy putty to dry.
#3280
Posted 23 August 2010 - 07:19 PM
My Twinsanity (double furyfire):
Orange on one side, green on the other. Super comfy handle is super comfy and primes both blasters at the same time, needless to say, this thing shoots fast. I hope to do a writeup at some point (well, I hoped to do I writeup 3 months ago, but never had time) but for now these pictures should show about all you need to know.
Final notes: No hot glue was used, and you can remove the metal bars from the outside in order to open up just one blaster at a time if you wish, as opposed to having to open both at once. This mod is dedicated to Dev Nerfan, Martin, Mike, Alastair, Alex, Jared, Adam, Noah, and all you other awesome facebook Nerf regulars, you guys keep me doing what I'm doing.
Edited by HasreadCoC, 23 August 2010 - 09:02 PM.
I'm the only respectable person here. The rest of the NIC are pretty much just child molesters.
AKA: ObiWonTwo on Nerfrevolution, and most of the rest of the internet for that matter.....
#3281
Posted 24 August 2010 - 10:20 PM
With Rev. 2 Slug Breech. Shoots ok.
#3282
Posted 24 August 2010 - 10:39 PM
10" Pteg barrels.
Rear-loading.
Craft foam for the turret seal.
Brass for the dart slide.
Plugged pump.
Glued trigger spring.
Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.
Canadian Nerfers-R.I.P.
#3283
Posted 25 August 2010 - 12:15 AM
#3284
Posted 25 August 2010 - 01:53 AM
Homemade lever trigger, spring in the pump handle to single-hand wield, and homemade low-angle hopper.
Two foot CPVC barrel. The breech end is reamed out with a pair of kitchen shears so it's nice and inviting, then percussed into the PVC wye. The blaster already came with a PVC coupler, so the PVC wye is a perfect fit. A coupler is solvent-welded to the magazine branch of the wye. On the field, this will likely be fed by a SpeedHopper.
#3285
Posted 26 August 2010 - 11:02 PM
5k + 4k + 1500 pump = SUPERTECH OVER 9000
The cam works, and the pump is unplugged and held on with hose clamps.
This is my other 4k. 3K tank on the left, 4k tank on the right. And yes, that's a fucking 1/2" dump valve. I may post a revision to Ryan's 4k overhaul, but don't count on that.
Sm5k + SS Sm5k + Sm2k + Hopper = Colorful, yet effective 5k.
oh look, a matching SS Sm500?
Sneakshots are awesome, but only awesome if it utilizes the original bolt.
This one is especially awesome because it has a 4 shot inline clip.
Semi auto Sm1k. Neat huh? Wanna see an internals pic?
Yes, those are the internals. Wanna know what I did to it?
I cut down the cam spring. The trick is to cut it down just enough so that it opens the tank, but the air is enough to force it valve closed. Wanna know how long the cam spring should be?
That long. If anyone wants a thread about this, feel free drop me a PM.
Uh oh, is that a SS2 tank with a new dump vale?
I'm also going to solvent weld a coupler over this, so don't warn me that the epoxy isn't strong enough.
[18:17] <+Nerfer> pls dont call me that
[18:18] * Nerfer is now known as Guest17574
[18:18] <+Lucian151> Woah its Beefy Theify
[18:19] <+Guest17574> STOP CALLING ME THAT IM NOT FAT
[18:19] <+Guest17574> pls
#3286
Posted 27 August 2010 - 07:29 PM
So, my friend Nerfan (NH account here: http://nerfhaven.com...showuser=39056) came up with this:
A hoppered fully functioning turret: It works! Because this was done on a Quadshot, the turret auto-rotates, giving you a huge supply of ammo without having a 5ft long hopper (banned at most wars), plus, this is cooler
Close-up of the connection point:
Looking down the center of the barrels:
He has also posted this on NRev (where he is also known as Nerfan). Since he has not yet been validated here on NH (which is strange since he joined 5 months ago, I thought the wait was 2 months?) he asked me to post it for him.
EDIT: He has now been validated.
Let me once again stress that I take NO credit for this, I'm not stealing his idea/pics, I'm just posting for him
Edited by HasreadCoC, 28 August 2010 - 05:55 PM.
I'm the only respectable person here. The rest of the NIC are pretty much just child molesters.
AKA: ObiWonTwo on Nerfrevolution, and most of the rest of the internet for that matter.....
#3287
Posted 28 August 2010 - 03:16 PM
I used Dim3's measurements for Double/Triple Mavs to design sprockets for my own Tri-Cylinder:
Needs painting and a few other things... I've got plans for making it a Semi-Auto by merging it with a Magstrike and a hornet chamber... but that's still in the test phase. I'm not going to hack into such a pretty thing until I'm sure it will work.
Sprockets are made from 2 layers each of 1/8" Acrylic that has been laser-cut from a design I made in Illustrator.
#3288
Posted 28 August 2010 - 04:14 PM
Minimized, draw-extensioned Tech Target.
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
But Zeke guns tend to be like proofs by contradiction
Theoretically solid but actually non-constructive
Rnbw Cln
#3289
Posted 29 August 2010 - 09:23 PM
Rear Loading!!
Will be getting paint and other body work eventually.
Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.
Canadian Nerfers-R.I.P.
#3290
Posted 30 August 2010 - 04:53 PM
STICK A FUCKING BS TANK IN THAT MOTHERFUCKER!
Still working on some niggles, like air leaks and still need to fix the shell and the trigger. But once it works, damn will this be awesome.
#3291
Posted 31 August 2010 - 12:12 AM
BBB with inline clip, holds nine stefans. Or four streamlines. 40'-50', great for indoor games.
Darts will not spill everywhere.
Pistols. Simple couplered PS, Switchshot Wii spring on the NF. I've got a seven shot turret for the NF as well.
Aforementioned Switchshot with a Firefly spring. Firefly springs are strong.
Modded Max-D 2k. Needs a pump replacement.
Edited by Darksircam, 31 August 2010 - 12:27 AM.
#3292
Posted 01 September 2010 - 10:58 PM
12" PETG barrels/turret flow mod/valve flow mod/plugged pump (with dimple to account for the check valve)/plugged goo gauge
#3293
Posted 04 September 2010 - 11:37 AM
Both are mine (I'm not sharing just yet with Whitemoonlight...hehe). I will be makin loads more soon. Oh, and btw, they shoot farther than your NF rifles. 110' easy...
A superbly surprising blaster I made post-fire, pre-apoc, that proved to be really good. I was shooting over peoples' heads all day...srsly, it shoots excessively far...110'+ (if you guys haven't guessed, that's where the woodline is on this property...can't really measure after that. It hits that far at chest level though.)
And for when I just wanna hurt people:
Ya...
Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.
#3294
Posted 04 September 2010 - 03:21 PM
Really basic small stock. Just something easier to shoulder.
Shoots a million miles.
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
But Zeke guns tend to be like proofs by contradiction
Theoretically solid but actually non-constructive
Rnbw Cln
#3295
Posted 04 September 2010 - 05:53 PM
Polycarbonate spacer to keep everything from moving:
Perfect coupler:
All together now!
Insanity:
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3296
Posted 04 September 2010 - 06:22 PM
my AT3k
I replaced the pump, made it rear loading, gave it 12 inch PETG barrels, and obviously painted it.
I bought this one fairly heavily used, it worked fine, but it had multiple scuffs in the paint and it looked terrible.
So I painted over the scuffs and put some Effeminate electrical tape on it.
I know the picture is a bit large, if someone would PM me describing how to shrink it down a bit (or send me a link to a topic that shows how) that would be sweet! I can't seem to figure it out.
#3298
Posted 05 September 2010 - 01:04 PM
My triple couplered 4b. I adapted taerkitty's return spring idea for the pump but instead, I used a longshot spring. It gives it a better feel in general.
PAS
Couplered quadshot with pvc/cpvc breech. I did Zorn's mods and slapped a coupler on. With a hopper, hits 95' over a tape...with slugs
Closeup of the breech:
Lastly, my 3k with PETG ammo holders on the stock
Edited by TxNerfer, 05 September 2010 - 01:18 PM.
1. Thank you, I take donations in horse/wolf porn
#3299
Posted 06 September 2010 - 09:29 AM
Naturally this is part one part two is making a rechargable battery pack.
It shoots far enough for stock ammo wars, and speaking of which if you live in Milwaukee and somehow haven't hear of it here is my war.
Edited by louiec3, 06 September 2010 - 09:33 AM.
#3300
Posted 06 September 2010 - 08:37 PM
A big thanks to Blue and Atomatron for the guns.
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users