Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3226 firesflame4

firesflame4

    Member

  • Members
  • 64 posts
  • Location:Clarks Summit, PA

Posted 29 July 2010 - 12:10 PM

This is one of the two Lanard Shotguns I'm taking to Apoc.

Posted Image

It will be getting a paint job tomorrow. The homemade pvc wye is basically a placeholder until my shipment from flexpvc.com comes in.
  • 0

QUOTE
Talio @ Sep 7 2010, 5:35PM
If no one is interested no one is interested. Think of it like this...say you take your dick out in front of a girl and she's not interested in it. It doesn't help to smack her in the face again with it 7 days later.

#3227 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts
  • Location:Tampa Florida

Posted 29 July 2010 - 09:48 PM

My MegaMissleStorm revised a bit.......

I swung the pump to the opposite side---way more comfortable, improved the turret seal, and replaced the 3k pump with a BasketBall pump.

Posted Image
Posted Image
Posted Image
Posted Image

A Contract LS for A New Rage.......PETG+17/32 breech, powerfull springs, pvc'd stock, mega-reinforced Boltsled, beefy catch, superb plunger seal, ultra deadspace removel. 90's easy.

Posted Image
Posted Image
Posted Image
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#3228 firesflame4

firesflame4

    Member

  • Members
  • 64 posts
  • Location:Clarks Summit, PA

Posted 30 July 2010 - 03:58 PM

Here is the paint job.
Posted Image
The white paint I had wasn't very good so that looks like crap, but it's better than being stock colours.
  • 0

QUOTE
Talio @ Sep 7 2010, 5:35PM
If no one is interested no one is interested. Think of it like this...say you take your dick out in front of a girl and she's not interested in it. It doesn't help to smack her in the face again with it 7 days later.

#3229 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 31 July 2010 - 10:05 PM

Thanks for posting my pictures of your guns Lucian.

Here's a couple commissioned paintjobs on Crossbows for Nerfer9 and HOTH

N9's Bow: "Hostage"

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

^ worth noting, metallic camo doesn't work as well with Red/Yellow there is an "orange" but its only noticeable in person and in direct sunlight

HOTH's Bow: "Stockholm Syndrome"

Posted Image

Posted Image

Posted Image

This would be the one he made This Thread about... Cleaned up the shell, gave it a classy metallic black (with textured glitter metallic) and royal blue traditional Crossbow scheme.

-Bags

PS: Yes, the names are jokes due to circumstances I won't go into.

Edited by baghead, 31 July 2010 - 10:19 PM.

  • 0

Don't call it a comeback, I never left.


#3230 cheyner

cheyner

    Member

  • Members
  • 240 posts
  • Location:Kingston
  • State:Ontario
  • Country:Canada

Posted 31 July 2010 - 10:49 PM

That is amazing work Baghead, I really need to start painting.
At least this has some nice faded character to it. I found it at a garbage dump in perfect working order.
I give you Second Chance, my rescued SuperMaxx 1500

Posted Image

Butchered rear loading slot:
Posted Image

Craft foam for the turret seal.
Plugged pump.
Cleaned so many times I lost count.
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#3231 trogdor65

trogdor65

    Member

  • Members
  • 142 posts
  • Location:Minnesota

Posted 01 August 2010 - 03:14 PM

Just something I was working on this weekend to keep me busy, I really like how it turned out. (Although the pictures do portray the green in an odd shade.)

It was originally an airsoft gun given to me by a friend, I believe it is modeled after a G36C or something along those lines. I gutted the original internals and replaced them with two big salvo air tanks and pump as well as a hornet blast button. Both barrels fire simultaneously with one pull of the trigger. The barrels are composed of SCH 40 1/2" PVC pipe with short sections of 9/16" brass pipe nested inside.

This gun has a folding stock, tactical rails (for a flashlight mostly), and the sights on top are not extremely useful but semi-cool/fun to have and use.

Overall really like how this gun turned out and had a lot of fun making it.

Enjoy!

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
  • 0

#3232 hawkshot

hawkshot

    Member

  • Members
  • 200 posts

Posted 01 August 2010 - 09:34 PM

First documented modified CLEAR deploy on NH and NR(I don't check nhq);
Posted Image
Hoppered LS, shoots very well:
Posted Image
  • 0
Call me Hawk.


Hawkshot, one of the founding FL Nerfers.

#3233 louiec3

louiec3

    Member

  • Members
  • 316 posts
  • Location:Columbus
  • State:Ohio

Posted 02 August 2010 - 10:40 AM

Venom and I overhauled a 3k.

It's super 1337.

Posted Image
Posted Image

Tacticool gauge

Giant rearloading slot.

Posted ImagePosted Image
Posted Image

We ran out of petg so we used aluminum.
  • 0

#3234 Zack the Mack

Zack the Mack

    Member

  • Members
  • 360 posts

Posted 02 August 2010 - 01:10 PM

Super Soaker Iron Man + 3K + bike pump + 5-dart breeched hopper + 14" brass barrel + 7" breeched barrel + N-Strike Rail + Pinpoint Sight = My Apoc primary.

Posted Image

Super Soak that ho.

Posted Image

The red dot sight isn't just for tacticool overkill - because of the air tank's orientation, it's impossible to aim down the barrel. The blaster's accurate enough for the optics to work.
  • 0
Ask me questions about electronics, Arduino, and 3D printing

#3235 westpyroairsoftboy

westpyroairsoftboy

    Member

  • Banned
  • 44 posts

Posted 02 August 2010 - 08:01 PM

Zack, 'm SOOOOOOOOOOOOOOOOO fucking jealious. Nice Work. Here's some of my latest:

Pistol Splat w/Shit PJ:
Posted Image

Compromiser V1.0:
Posted Image

Old Original Painted NF:
Posted Image

#3236 ZimZam93

ZimZam93

    Member

  • Members
  • 38 posts

Posted 02 August 2010 - 11:28 PM

Posted Image

thats is my baby, my first modded gun, AR removal, double springed, and red tiger for kicks

Posted Image

This is my longstrike, i dont use it for wars, cuz the rages are awful, but i like the paintjob and extras i put on for looks

Posted Image

Posted Image

this is my raider, its one of my favorites, good ranges, and cool paint job
sorry about picture quality, using my webcam is much easier then my real camera
  • 0
Become Legendary

Everyone knew it would suck...we just didn't know it would suck this much

#3237 louiec3

louiec3

    Member

  • Members
  • 316 posts
  • Location:Columbus
  • State:Ohio

Posted 04 August 2010 - 12:22 PM

Posted Image

Posted Image

Its a pulsator with extended mags. Snake wanted more balls for his.

I would post a link to the write-up, but I'll just save VACC some time.

http://nerfhaven.com...p?showuser=1034
  • 0

#3238 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts
  • Location:Tampa Florida

Posted 04 August 2010 - 08:08 PM

Lou-- no Nrev links, LULZ.

Anywho, thanks for the upgrade Jake.



Posted Image
Posted Image
Posted Image
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#3239 firesflame4

firesflame4

    Member

  • Members
  • 64 posts
  • Location:Clarks Summit, PA

Posted 04 August 2010 - 09:39 PM

This in my AT3K integrated into an Alpha Trooper.
Posted Image
I left the original air tube because I like the way it looks.
Posted Image
Here is the breech.
Posted Image
The air tank location.
Posted Image
I would be taking this to Apoc, but I need to work out a trigger problem and I don't know if I will have time to do that with me finishing my Hopper clips which the Wyes for them come in the mail tomorrow.

Edited by firesflame4, 04 August 2010 - 09:40 PM.

  • 0

QUOTE
Talio @ Sep 7 2010, 5:35PM
If no one is interested no one is interested. Think of it like this...say you take your dick out in front of a girl and she's not interested in it. It doesn't help to smack her in the face again with it 7 days later.

#3240 sci-olyrocks

sci-olyrocks

    Member

  • Members
  • 118 posts
  • Location:Rochester, NY

Posted 06 August 2010 - 03:04 PM

I just picked up an Alpha Trooper this morning. It preforms great for a stock gun(~30 ft.), but I thought I would make it better buy preforming some basic mods.

Posted Image
Posted Image

First of all, I removed the AR by drilling it out. It took me a while because there was some new piece inside the tube that I have not seen in other clip system reverse plunger guns. (That piece is not pictured)
Posted Image

I then covered up the little hole in the tube with a little piece of duct tape.
Posted Image

And finally I put duct tape around the plunger tube for better spring compression.
Posted Image

I also made made it possible to move the jam door at any time. It is the same as on the longstrike.
It now gets 40+feet, and I've seen it get 60, but that is because streamlines are crazy darts.

Edited by sci-olyrocks, 06 August 2010 - 08:30 PM.

  • 0
You can talk to me about anything you want as long as it involves emma stone

#3241 taerKitty

taerKitty

    Member

  • Members
  • 883 posts
  • Location:98052
  • State:Washington
  • Country:United States

Posted 06 August 2010 - 04:48 PM

Got more work done on my Cluster-Eff of a 4B:

Posted Image

Unsure if this is anything new / newsworthy, but what SublimeDom77 on IRC dubbed the SpeedHopper.

Topmost dart sometimes falls out of it. It also falls when I point the blaster above 45-degrees, but when would that happen?

===

Posted Image

MuttonChops' Chopper, lowest profile I can manage. I used 1" thinwall PVC on the outside to join it. It's tight enough to solvent weld holds it to the wye. More solvent weld to attach the elbow to the wye. I needed to wrap the 45-degree elbow in some e-tape to get it seat properly. That's not airtight, and I don't trust the solvent weld itself, so there's a ring of hot glue top and bottom.

Biggest win: bigger throat leading to the wye into which for the dart to fall. I prime it by moving the blaster back and forth - that's enough to jostle the dart into the wye, but I did have one misfeed. Maybe I had the blaster tilted slightly back when I was pumping it.

Ball valve on the back to load, with a ring of 1-1/4", with a 120-degree chunk cut out, to stabilize it. The wye + Chopper come off the blaster as one piece. The three-quarter 1-1/4" ring stays on the blaster. I guess it works as a sight. I just added it, so I'll have to see come next war.

===

Posted Image

Close-up of the connection. (Also, a ring of CPVC dart holders. Nothing special about that; I just wanted to explain the purple stuff (primer) in case anyone was wondering.)

===

There's a nub of PVC on the blaster that stays. The barrel detaches, so each wye is pretty much dedicated to its own magazine system.
  • 0
Fugly is a feature.

#3242 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts
  • Location:West LA
  • State:California
  • Country:United States

Posted 08 August 2010 - 12:52 PM

We had a neutered NIB war yesterday.

Posted Image

I made a Berserker.

Posted Image

Many crayolas and barrel pegs died to bring this gun to usability.

Posted Image

ZOMG WE'RE AT APOC.

Posted Image

Tacticool.

Posted Image
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3243 zer0metal

zer0metal

    Member

  • Members
  • 2 posts

Posted 09 August 2010 - 01:57 AM

My RSCB'd Nite Finder.

Posted Image

Posted Image

I can use the barrel either by itself or on the Rscb.
Posted Image

Posted Image

I removed the original pcb with the light on it and cut the tube down so i could fit the lazer in.
Posted Image

Posted Image

I still have some work to do, remove some deadspace, pad the plunger head and some bodywork and a paint job.
  • 0

#3244 NerfRogue83

NerfRogue83

    Member

  • Members
  • 646 posts
  • Location:Tampa Florida

Posted 09 August 2010 - 09:18 AM

Super BoltSled!...lol

Well, I felt I should share a few pics from after this weekends war. When not properly reinforced with insanely strong springs added ,the Boltsled breaks. My sleds+ internals are ALWAYS up to the task......too bad the METAL priming bar was not---LOL

Posted Image
Posted Image
  • 0
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!


#3245 archangel24

archangel24

    Member

  • Members
  • 215 posts
  • Location:Louisville
  • State:Kentucky
  • Country:United States

Posted 10 August 2010 - 01:54 PM

Finally got my quad-shot back from Shrub.
I gave it a worn-snow-camo PJ

Posted Image
Right Side View

Posted Image
Left Side View

Posted Image
The turret that was in BadWrench's writeup (given to me by shrub)

Posted Image
Plunger Draw Extension (done by shrub)

Posted Image
Posted Image
Sloppy Rear-Loading Slots (done by me)


9" turret that i did rushing without proper tools at a friends house the night before a war:
Posted Image
Posted Image

Barrel Spacer:
Posted Image
  • 0
QUOTE(Talio @ Oct 14 2010, 10:37 PM) View Post

I would much perfer a game that's free of KY. I like it rough. Right, Vacc?

"She went all Ghetto Fab on you."

#3246 Soccerman

Soccerman

    Member

  • Members
  • 1 posts
  • State:Pennsylvania
  • Country:United States

Posted 10 August 2010 - 07:01 PM

I've been lurking around this forum for at least two years now, and thought it was about time I gave back to the community which has helped me numerous times.

Posted Image

My Scout with a black and gold paint job.
  • 0
--'-<O-----+]::::::
.... / /` ---'
... |_|

#3247 archangel24

archangel24

    Member

  • Members
  • 215 posts
  • Location:Louisville
  • State:Kentucky
  • Country:United States

Posted 10 August 2010 - 07:12 PM

A WIP that I have been working on for over a month now and I just recently installed it into a mav.

I call it the VMT.
Volley-Mav-Titan:
Posted Image
  • 0
QUOTE(Talio @ Oct 14 2010, 10:37 PM) View Post

I would much perfer a game that's free of KY. I like it rough. Right, Vacc?

"She went all Ghetto Fab on you."

#3248 meierboy97

meierboy97

    Member

  • Members
  • 4 posts

Posted 10 August 2010 - 10:59 PM

singled ls w/ integrated singled hyperfire (both had broken parts) made entirely out of 1/2 pvc for barrel which is all i had or else i woulda used 1/2 cpvc... hyperfire has a basic string onto key ring trigger... btw this is my first post.picpicpicpic
  • 0

#3249 archangel24

archangel24

    Member

  • Members
  • 215 posts
  • Location:Louisville
  • State:Kentucky
  • Country:United States

Posted 11 August 2010 - 02:30 PM

Lastnight I was unhappy with the performance of my Quad-Shot and decided to do more stuff.

Catch Reinforcement:
Posted Image


Draw Extension:
Posted Image
Posted Image
Now goes far enough back for the 8th catch but slips gets around 100' flat with streamlines.
Working on getting it to go to the 9th catch. Has a stock spring and blue ls spring.

Stock Addition WIP!
Posted Image
Posted Image

Edited by archangel24, 11 August 2010 - 02:35 PM.

  • 0
QUOTE(Talio @ Oct 14 2010, 10:37 PM) View Post

I would much perfer a game that's free of KY. I like it rough. Right, Vacc?

"She went all Ghetto Fab on you."

#3250 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 559 posts
  • Location:Merseyside, UK
  • State:England
  • Country:United Kingdom

Posted 11 August 2010 - 02:50 PM

Posted Image
Will be receiving a PJ when my paint arrives
  • 0


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users