5162 replies to this topic

[cheyner]

Ninja Turtle NF.


Best rail accessory ever.

Flower Power, my ladys 4B.

[BritNerfMogul]

QUADSHOT COMBO BREAKER!!!!

@ SonReeceSonJenson - Sadly I don't. I use some cycling glasses with replacable lenses so depending on my mood depends on which lenses I use. Most of the time I use the yellow lenses.

And to keep the thread on topic:

[princexbuster]

MINE IS BETTER and probably more used but still.

[Ryan201821]

Woah, haven't posted here in a while.

Contract for Louie, Overhauled 1500.



New record times for 1500 turrets thanks to the new belt sander. The whole turret only took 20 minutes to do, minus time spent waiting for epoxy putty to dry.

[HasreadCoC]

Ok, my first ever post, I am praying that the images show up correctly.

My Twinsanity (double furyfire):





Orange on one side, green on the other. Super comfy handle is super comfy and primes both blasters at the same time, needless to say, this thing shoots fast. I hope to do a writeup at some point (well, I hoped to do I writeup 3 months ago, but never had time) but for now these pictures should show about all you need to know.

Final notes: No hot glue was used, and you can remove the metal bars from the outside in order to open up just one blaster at a time if you wish, as opposed to having to open both at once. This mod is dedicated to Dev Nerfan, Martin, Mike, Alastair, Alex, Jared, Adam, Noah, and all you other awesome facebook Nerf regulars, you guys keep me doing what I'm doing.

Edited by HasreadCoC, 23 August 2010 - 09:02 PM.

[nisaburo]

Tech Target rifle. Because nitefinders are dumb.


With Rev. 2 Slug Breech. Shoots ok.

[cheyner]

Finished Sharvil06's SM1500.



10" Pteg barrels.
Rear-loading.
Craft foam for the turret seal.
Brass for the dart slide.
Plugged pump.
Glued trigger spring.

[firepie]

[taerKitty]

Homemade lever trigger, spring in the pump handle to single-hand wield, and homemade low-angle hopper.

Two foot CPVC barrel. The breech end is reamed out with a pair of kitchen shears so it's nice and inviting, then percussed into the PVC wye. The blaster already came with a PVC coupler, so the PVC wye is a perfect fit. A coupler is solvent-welded to the magazine branch of the wye. On the field, this will likely be fed by a SpeedHopper.

[jubjub517]

Wow, I sorta forgot about the post button in this thread.




5k + 4k + 1500 pump = SUPERTECH OVER 9000

The cam works, and the pump is unplugged and held on with hose clamps.


This is my other 4k. 3K tank on the left, 4k tank on the right. And yes, that's a fucking 1/2" dump valve. I may post a revision to Ryan's 4k overhaul, but don't count on that.


Sm5k + SS Sm5k + Sm2k + Hopper = Colorful, yet effective 5k.

oh look, a matching SS Sm500?



Sneakshots are awesome, but only awesome if it utilizes the original bolt.

This one is especially awesome because it has a 4 shot inline clip.


Semi auto Sm1k. Neat huh? Wanna see an internals pic?


Yes, those are the internals. Wanna know what I did to it?

I cut down the cam spring. The trick is to cut it down just enough so that it opens the tank, but the air is enough to force it valve closed. Wanna know how long the cam spring should be?


That long. If anyone wants a thread about this, feel free drop me a PM.


Uh oh, is that a SS2 tank with a new dump vale?

I'm also going to solvent weld a coupler over this, so don't warn me that the epoxy isn't strong enough.

[HasreadCoC]

I am posting this for a friend, I take NO credit whatsoever

So, my friend Nerfan (NH account here: http://nerfhaven.com...showuser=39056) came up with this:



A hoppered fully functioning turret: It works! Because this was done on a Quadshot, the turret auto-rotates, giving you a huge supply of ammo without having a 5ft long hopper (banned at most wars), plus, this is cooler

Close-up of the connection point:



Looking down the center of the barrels:



He has also posted this on NRev (where he is also known as Nerfan). Since he has not yet been validated here on NH (which is strange since he joined 5 months ago, I thought the wait was 2 months?) he asked me to post it for him.

EDIT: He has now been validated.

Let me once again stress that I take NO credit for this, I'm not stealing his idea/pics, I'm just posting for him

Edited by HasreadCoC, 28 August 2010 - 05:55 PM.

[KitAdrian]

I figure I've been sitting on this beauty for long enough, I should share it with the world.

I used Dim3's measurements for Double/Triple Mavs to design sprockets for my own Tri-Cylinder:





Needs painting and a few other things... I've got plans for making it a Semi-Auto by merging it with a Magstrike and a hornet chamber... but that's still in the test phase. I'm not going to hack into such a pretty thing until I'm sure it will work.

Sprockets are made from 2 layers each of 1/8" Acrylic that has been laser-cut from a design I made in Illustrator.

[Ice Nine]

Hoppered Frankenfinder.



Minimized, draw-extensioned Tech Target.

[cheyner]

AT4K!!!


Rear Loading!!


Will be getting paint and other body work eventually.

[BritNerfMogul]

Sick of your RFR breaking?

STICK A FUCKING BS TANK IN THAT MOTHERFUCKER!



Still working on some niggles, like air leaks and still need to fix the shell and the trigger. But once it works, damn will this be awesome.

[Darksircam]

Pew pew. Raider pistol.


BBB with inline clip, holds nine stefans. Or four streamlines. 40'-50', great for indoor games.

Darts will not spill everywhere.


Pistols. Simple couplered PS, Switchshot Wii spring on the NF. I've got a seven shot turret for the NF as well.


Aforementioned Switchshot with a Firefly spring. Firefly springs are strong.


Modded Max-D 2k. Needs a pump replacement.

Edited by Darksircam, 31 August 2010 - 12:27 AM.

[popatachi]

12" PETG barrels/turret flow mod/valve flow mod/plugged pump (with dimple to account for the check valve)/plugged goo gauge

[diamondbacknf1626]

Oooo two posts in one day. What an improvement. So here are the first two of many godly NFs to be recreated since the fire (bonus points for zebra print duck tape):

Both are mine (I'm not sharing just yet with Whitemoonlight...hehe). I will be makin loads more soon. Oh, and btw, they shoot farther than your NF rifles. 110' easy...

A superbly surprising blaster I made post-fire, pre-apoc, that proved to be really good. I was shooting over peoples' heads all day...srsly, it shoots excessively far...110'+ (if you guys haven't guessed, that's where the woodline is on this property...can't really measure after that. It hits that far at chest level though.)
And for when I just wanna hurt people:

Ya...

[Ice Nine]

Sylow Normalizer work, you know.





Really basic small stock. Just something easier to shoulder.

Shoots a million miles.

[Lucian]

New style Big Blast with internal coupler.




Polycarbonate spacer to keep everything from moving:


Perfect coupler:


All together now!


Insanity:

[rosenstyle]

This is my first post here on NerfHaven so I figured this would be a good way to start.
my AT3k

I replaced the pump, made it rear loading, gave it 12 inch PETG barrels, and obviously painted it.
I bought this one fairly heavily used, it worked fine, but it had multiple scuffs in the paint and it looked terrible.
So I painted over the scuffs and put some Effeminate electrical tape on it.

I know the picture is a bit large, if someone would PM me describing how to shrink it down a bit (or send me a link to a topic that shows how) that would be sweet! I can't seem to figure it out.

[CobraNerf]

Modifications:
-16mm Conduit Coupler
-4" 16mm Conduit speedloader
-Minimization
-C-836 Spring replacement
-Catch Spring replacement
-2x O-rings
-Paintjob
Ranges are from around 60-75 feet. I like it alot.

[TxNerfer]

I thought I might as well show off a few guns:

My triple couplered 4b. I adapted taerkitty's return spring idea for the pump but instead, I used a longshot spring. It gives it a better feel in general.




PAS



Couplered quadshot with pvc/cpvc breech. I did Zorn's mods and slapped a coupler on. With a hopper, hits 95' over a tape...with slugs



Closeup of the breech:



Lastly, my 3k with PETG ammo holders on the stock

Edited by TxNerfer, 05 September 2010 - 01:18 PM.

[louiec3]

I got my stampede yesterday at the toys r us in Racine, and I wasted little time in popping out the a/rs. This gun is awesome it's like an automatic longshot with a less sucky handle, and for those who are wondering the plungertube is the same diameter as a nightfinder's.

Naturally this is part one part two is making a rechargable battery pack.

It shoots far enough for stock ammo wars, and speaking of which if you live in Milwaukee and somehow haven't hear of it here is my war.

Edited by louiec3, 06 September 2010 - 09:33 AM.

[Lucian]

When Classy meets Classic.


A big thanks to Blue and Atomatron for the guns.