5162 replies to this topic

[grafitibbbow]

finaly a successfull Angel Bow. Four springs, 150' ave. AKA insaine




YEAY

[Killoffire23]

The singled longshot flows into an rscb clip on the right side of the gun. The main barrel has a hornet tank in it. Longshot gets 64 feet flat, Recon gets 50 feet flat, and hornet gets 33 feet flat with 10 pumps. All ranges are averaged. Watch this video to get a better idea of how it works. http://www.youtube.c...u/0/a19Z1IauQKc




edit: sorry about the large pic. I think I have it figured out now.

Edited by Killoffire23, 12 August 2010 - 04:14 AM.

[archangel24]

I was getting tired of not being able to shoulder my pull back modded Ls so i made a +Bow style stock for it.




As you can see the stock is a bit bent because my nephew started playing with it while it was still drying while I was asleep. Will be fixed soon.

Lately my Quad-Shot trigger has been pivoting due to the thin plastick rail that it slides on was weak and partially broke off at the base where it connexts to the shell so i decided to reinforce that with a small Stanley L-Bracket that my brother had.

Soon to be done to the other side of the shell. NOTE: I had to trim one side of it down so that it won't interfere with the travel of the trigger.

Edited by archangel24, 12 August 2010 - 04:47 PM.

[NerfRogue83]

Clear-er NF!

No more goofy orange PlungerTube.
Clear plungerTube, mad spring, draw extention, padded plungerHead, supa seal, cpvc coupler, clear speedloader, minimized shell, goofy light wiring removed. 75'-80' flat.......and way sexier.

Edited by NerfRogue83, 25 August 2010 - 11:32 PM.

[wohnson89]

My newish Angel Breach LS and a NF to go with it.

It's painted with Duplicolor truck bedliner and its legit!
(gotta love the sheep skin)
I almost want to name it the "The Poop Shoot 4000" in honor of Talio!



I almost want to name it the "The Poop Shoot 4000" in honor of Talio!




I'm no pro at taking pictures but the pics defiantly don't do these justice.

[Gears]

Here's a NF I made for Apoc. My darts were super super tight in cpvc so it was kinda dookie. Need to find the battery cover.

Edited by Gears, 13 August 2010 - 04:26 PM.

[Nerf Bros]

I decided it'd be boring to spend all my grad party gifts on college and my car so I put some of the gift cards into a clear deploy:

Fully Stage 1 modded

I used hotglued craft foam instead of e-tape because it looks cleaner. Ranges are in the 40-50 ft range, streamlines are finicky.
Also, because there is no clip storage on the deploy I turned some junk into a clip holder for my bandoleer:

[jerm78]

my minimized Recon with mini clip



Jam Blaster with pvc coupler and 14" barrel.

[jerm78]

[NerfRogue83]

The newest L/R creation.........




Bondo and PJ forthcoming.

[Roger Explosion]

Longstrike with an odd maroon colour. Bizzarly enough, it was ment to be Fluroescent pink. But the black Vinal Die undercoat made it go wrong. I don't mind the colour, but this pic makes it look bad.


Closeup on the paint. And yes, I'm aware there is some blue showing in the chanel. that was only the second coat. the final is all coated properly.


Super complex aluminum homemade internals. So advanced it dosen't even use any moving parts.


mouthpiece made from a cut back reducing coupler. Yep, this badboy is powered by a pair of high airflow lungs. Wins the shit out of that inverted plunger that was lurking inside before.

[k9turrent]

DS pistol with a handle

[Lucian]

Insane with a hopper.


Sparkly...


Bags did a great job on the 3 above guns (Maxshot, TTG, 2k), they couldn't have came out much better then they did.

[NerfRogue83]

Nothing fancy......but I think it fits this blaster--simple and clean.






You can guess where the write-up is......lulz.

[Nerf Bros]

write up

[soccerbeast003]

Sorry about the crappy pics, but thats an overhauled 3k on a brass breeched longshot. It still accepts clips. I still have to figure out how I want to do the trigger on the 3k.




It's also gonna get a paintjob sooner or later.

[Broderick]

Bow 'N Arrow. Painted it black, since Black and Pink is the manliest color combo out there. I'll test ranges and stuff once I get money to buy some clear coat, since I haven't put one on yet. Being broke sucks.

[RedHead]

Best Gun Evar!
SM1500, 8" 9/16 brass barrels with 17/32 brass sleeved inside, pump's plugged, and I attached a stock to make the blaster more comfortable to pump and fire. Typical SM 1500 ranges, the spring on the air tank's release pin is hot-glued to make the air flow more effective, and.. well, I guess that's about it.

Edited by RedHead, 18 August 2010 - 06:56 PM.

[Gears]

Fuck yeah, needle barrels!

[lionhawk]

Here is my new barrel replaced nightfinder. It shoots about 55 feet, I had trouble looking for the right tubing, but it worked out.

Edited by lionhawk, 20 August 2010 - 02:29 PM.

[Mehku]

A Work in Progress... I call it the Pumpshot (Or the really poor man's pumpbow)



My "breech" works kind of like a stock one (as in the bolt goes back and forth instead of the wye).



Right now, it currently works, but I need to iron out some bugs in the hopper clip. Some of the darts don't like to seat themselves. However, when I shake the gun to manually seat the dart, from what I can tell, it is extremely powerful. I do not have the official ranges as of yet, but judging by the way it launches the darts, it could well get into the 80-90's.

Edited by Mehku, 20 August 2010 - 11:48 PM.

[BritNerfMogul]

She may be missing 2 barrels, and the painted stock, but she's hitting 25-30ft with every barrel and a 1ft spread.

[Collective]

Some of the stuff I've been working on lately:



Nerfing has given me ample opportunity for self-discovery. For example, through modding these two blasters, I've discovered that I'm turret retarded. I flat out ruined the sm1500's turret, and I got half way through messing up the Triple Shot before I realized I was ruining it and gave up. So, now they're just waiting for a wye shipment. Turrets are old news anyway, right?

The sm1500 pump has been replaced by a Hornet pump., and the Triple Shot has had all the vogue mods done to it, including a ls spring addition. Also, to cover the gaping hole left by removing the turret I hand-crafted myself a little cover:



The sm1500 will be getting the same treatment soon.

[SonReeceSonJensen]

3rd quadshot post in a row! Brit, I hope you wear those shades and only fire from the hip

I'm more of a hopper guy, and I cannot see ANY reason I would not use a hopper on my quadshot, sooooo...


BAM! 1/2" wye JB weld'd directly to the plunger tube with a backstop bolt through the wye and stock barrel nub for good measure.


NEVER going to come off no mater how hard I run or jerky I pump.


A little internal pic action for those who want to cut out the bullschnok and admit they will never not use a hopper.


With the eliminated dead space my last shot is at 70", the range of my previous 2nd or 3rd shot of 5-6 in the clip.


Prepare to eat a pain salad.