Modification and Paintjob Pictures
#3251
Posted 11 August 2010 - 07:20 PM
YEAY
#3252
Posted 12 August 2010 - 03:50 AM
edit: sorry about the large pic. I think I have it figured out now.
Edited by Killoffire23, 12 August 2010 - 04:14 AM.
#3253
Posted 12 August 2010 - 01:54 PM
As you can see the stock is a bit bent because my nephew started playing with it while it was still drying while I was asleep. Will be fixed soon.
Lately my Quad-Shot trigger has been pivoting due to the thin plastick rail that it slides on was weak and partially broke off at the base where it connexts to the shell so i decided to reinforce that with a small Stanley L-Bracket that my brother had.
Soon to be done to the other side of the shell. NOTE: I had to trim one side of it down so that it won't interfere with the travel of the trigger.
Edited by archangel24, 12 August 2010 - 04:47 PM.
I would much perfer a game that's free of KY. I like it rough. Right, Vacc?
"She went all Ghetto Fab on you."
#3254
Posted 12 August 2010 - 09:46 PM
No more goofy orange PlungerTube.
Clear plungerTube, mad spring, draw extention, padded plungerHead, supa seal, cpvc coupler, clear speedloader, minimized shell, goofy light wiring removed. 75'-80' flat.......and way sexier.
Edited by NerfRogue83, 25 August 2010 - 11:32 PM.
Rknight-- wow......N9---your dad is in trouble now!
#3255
Posted 12 August 2010 - 11:51 PM
It's painted with Duplicolor truck bedliner and its legit!
(gotta love the sheep skin)
I almost want to name it the "The Poop Shoot 4000" in honor of Talio!
I almost want to name it the "The Poop Shoot 4000" in honor of Talio!
I'm no pro at taking pictures but the pics defiantly don't do these justice.
1992 Subaru SVX- My Baby
#3256
Posted 13 August 2010 - 04:26 PM
Here's a NF I made for Apoc. My darts were super super tight in cpvc so it was kinda dookie. Need to find the battery cover.
Edited by Gears, 13 August 2010 - 04:26 PM.
#3257
Posted 13 August 2010 - 09:42 PM
Fully Stage 1 modded
I used hotglued craft foam instead of e-tape because it looks cleaner. Ranges are in the 40-50 ft range, streamlines are finicky.
Also, because there is no clip storage on the deploy I turned some junk into a clip holder for my bandoleer:
#3258
Posted 14 August 2010 - 12:11 PM
my minimized Recon with mini clip
Jam Blaster with pvc coupler and 14" barrel.
#3259
Posted 15 August 2010 - 10:47 AM
#3260
Posted 15 August 2010 - 07:28 PM
Bondo and PJ forthcoming.
Rknight-- wow......N9---your dad is in trouble now!
#3261
Posted 16 August 2010 - 01:49 PM
Longstrike with an odd maroon colour. Bizzarly enough, it was ment to be Fluroescent pink. But the black Vinal Die undercoat made it go wrong. I don't mind the colour, but this pic makes it look bad.
Closeup on the paint. And yes, I'm aware there is some blue showing in the chanel. that was only the second coat. the final is all coated properly.
Super complex aluminum homemade internals. So advanced it dosen't even use any moving parts.
mouthpiece made from a cut back reducing coupler. Yep, this badboy is powered by a pair of high airflow lungs. Wins the shit out of that inverted plunger that was lurking inside before.
#3262
Posted 17 August 2010 - 09:16 AM
That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.
HOLY CRAP!
FU ALL
#3263
Posted 17 August 2010 - 02:09 PM
Insane with a hopper.
Sparkly...
Bags did a great job on the 3 above guns (Maxshot, TTG, 2k), they couldn't have came out much better then they did.
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3264
Posted 17 August 2010 - 09:41 PM
You can guess where the write-up is......lulz.
Rknight-- wow......N9---your dad is in trouble now!
#3266
Posted 17 August 2010 - 10:20 PM
It's also gonna get a paintjob sooner or later.
Tony Stark: Absolutely ridiculous. I don't paint.
#3267
Posted 18 August 2010 - 03:13 PM
#3268
Posted 18 August 2010 - 06:37 PM
SM1500, 8" 9/16 brass barrels with 17/32 brass sleeved inside, pump's plugged, and I attached a stock to make the blaster more comfortable to pump and fire. Typical SM 1500 ranges, the spring on the air tank's release pin is hot-glued to make the air flow more effective, and.. well, I guess that's about it.
Edited by RedHead, 18 August 2010 - 06:56 PM.
-Kaiba with mustache
http://www.escapistm...t-4-Dumb-Part-8
#3269
Posted 19 August 2010 - 05:24 PM
Fuck yeah, needle barrels!
#3270
Posted 20 August 2010 - 02:22 PM
Here is my new barrel replaced nightfinder. It shoots about 55 feet, I had trouble looking for the right tubing, but it worked out.
Edited by lionhawk, 20 August 2010 - 02:29 PM.
#3271
Posted 20 August 2010 - 10:51 PM
My "breech" works kind of like a stock one (as in the bolt goes back and forth instead of the wye).
Right now, it currently works, but I need to iron out some bugs in the hopper clip. Some of the darts don't like to seat themselves. However, when I shake the gun to manually seat the dart, from what I can tell, it is extremely powerful. I do not have the official ranges as of yet, but judging by the way it launches the darts, it could well get into the 80-90's.
Edited by Mehku, 20 August 2010 - 11:48 PM.
#3272
Posted 21 August 2010 - 03:38 PM
She may be missing 2 barrels, and the painted stock, but she's hitting 25-30ft with every barrel and a 1ft spread.
#3273
Posted 21 August 2010 - 06:38 PM
Nerfing has given me ample opportunity for self-discovery. For example, through modding these two blasters, I've discovered that I'm turret retarded. I flat out ruined the sm1500's turret, and I got half way through messing up the Triple Shot before I realized I was ruining it and gave up. So, now they're just waiting for a wye shipment. Turrets are old news anyway, right?
The sm1500 pump has been replaced by a Hornet pump., and the Triple Shot has had all the vogue mods done to it, including a ls spring addition. Also, to cover the gaping hole left by removing the turret I hand-crafted myself a little cover:
The sm1500 will be getting the same treatment soon.
#3274
Posted 21 August 2010 - 09:01 PM
I'm more of a hopper guy, and I cannot see ANY reason I would not use a hopper on my quadshot, sooooo...
BAM! 1/2" wye JB weld'd directly to the plunger tube with a backstop bolt through the wye and stock barrel nub for good measure.
NEVER going to come off no mater how hard I run or jerky I pump.
A little internal pic action for those who want to cut out the bullschnok and admit they will never not use a hopper.
With the eliminated dead space my last shot is at 70", the range of my previous 2nd or 3rd shot of 5-6 in the clip.
Prepare to eat a pain salad.
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people
I do not play with guns.
#3275 Guest_TheSilverhead_*
Posted 21 August 2010 - 10:09 PM
What do you get when you cross A UEF ACU, Supreme commander 2, Domminic Maddox, paint, a maverick, and a nitefinder? Dominic Maddox's Nitemav!!!!! The pics don't do it justice- this thing is the best pj I've ever done. I'd love some feedback! Any tips on putting very small details (UEF symbol) on it?
Woohoo! All Testors paint, too!
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users