5162 replies to this topic

[nate the great]

Yup, a Quadshot with removable stock

Closeup of the stock

Without stock

The stock is removed by unscrewing the screw in the handle the pulling on the PVC. The actual stock is a 1/2" PVC coupler pounded into a 3/4" to 1" PVC adapter which is connected to the raider stock by a screw and some hot glue to prevent wiggling. PM me if you have any questions or comments.

[taerKitty]

No, my trigger didn't break, but I wanted to see if I could retrofit a lever trigger to an old-style BBBB.

Extreme close-up:

Tools: Boltcutter, pliers, pipecutter.

Supplies: one wire handle from a medium binder clip, a #8 washer, 1/2" cpvc to serve as the fulcrum, 3/8" cpvc to block the binder clip wire, and a bit of crap foam to fill it up.

[Kingkottah]

Well for my first post I thought I would show off my new singled titan the aussie way (We dont have many chances to buy titans until they just hit our shores once again.)

Modular singled titan, I like that.


With the long barrel


Im about to test the ranges but weather permits.

[white jackal]

well i created a topic but apparently i shouldn't so im moving it here

hello every one, this is my first post in this forum so i will introduce myself before showing you the reasons of the second generation

i am 21 years old, i live in Quebec (french Canadian) and i have been into toy gun for as long as i remember so when i discover the nerf and their cool design i just fell for it.

A couple years ago me and some of my buddy who had the same interest started to do nerf war in the forest, but we didn't thought that we could modify them at the time (except for painting) and one day one of them sent to all of us this link http://nerfornothing.blogspot.com/ witch leaded me to this forum.

After that i tried to mod my recon but it didn't go well so basically gave up and gave the said recon to my father and he did a pretty good paint job (but he actually kept it lol) .

But when i saw the lancer of forsaken_angel24 i just couldn't resist i had to do it so i looked up his tutorial and picture i also had my father to help me to do it he found a lot of pic that helped us in the process. Meanwhile i found a lot of peoples who did a lancer mod but they were all different some didn't add the led other made a weird paint job and i found one who just added the chainsaw and leaved it like that and an other one (slowguitarman if i remember correctly) who pushed the idea to the upper level.

So after seeing all that i said to myself " they all did their lancer the way they wanted to do it...well i do the same" and here is the result.

enjoy

here is our model



here is me getting ready paint it (im sorry i didn't thought of taking picture of the process but its pretty much the same thing as forsaken)



doing the led and wiring





and the final product











the light goes on when you pull the trigger (i took it from the flash device in the firefly and remplaced the flash with a red led )



here's the internal mod

air restrictor removal for better air pressure delivery
replaced O-rings for better seal and greater pressure
triple spring chamber for maximum power
sealed air release pinhole for maximum pressure delivery
post removal for use with stephan's darts

range are about 115 feet (i didn't had anything to measure it except my own feet but i did it twice)

if you have any question feel free to ask

have a nice day

the sight is homemade for those who wonder how i got it and here's how i made it

first i used a heineken beer keg pipe holder (there is a hole in it that fits perfectly on a led) glued on the top of a piece of starwar ship cockpit then i putted on the back of it a small bolt with gears on both end (i dont really know where it came from my father gave it to me), after that i took a circle of plexiglass and shaped the inside into a cross that i fixed inside the ring of a broken watch after cutting the top and the bottom of it and glued it over the hole of the beer keg pipe holder so that the led enlighten the cross.

Edited by white_jackal, 23 June 2010 - 08:56 AM.

[Seven7h Man]

I've had this finished for a while now. Too lazy to post pics.







A bit about the gun, It's been finished and painted for a several months now. I'm so damn lazy when it come to stuff like this. But the finished product is wonderful. I'd estimate ranges of +100'.
Mods done:
Single rotating cpvc barrels
Rear loading
Reenforced catch
Reenforced everything
Partial k29, stock and slightly cut down PAS springs.
Über plunger-head seal

It rocks.


On a side note to white-jackal, that is one of the most beautiful pieces of plastic I've ever seen.

[NerfRogue83]

Stage 1: Main blaster internals replaced.




Stock power system replaced with NF guts---draw extended of course. (A first, to my knowledge) Upgraded spring gets to full compression, and blaster now primes exactly like a NightFinder. cpvc couplered, poly-carb spring rest, and ready for the next stage......integration.





The SneakFinder Write-Up

Edited by NerfRogue83, 23 June 2010 - 10:36 AM.

[popatachi]

Painted my PAS. It's hard to see, but the flames fade from purple to blue, back to front respectively. Flames were done using a tape mask.

[ModSquad]

Recon contract for a friend.


Power stock.


Custom breech.

Edited by ModSquad, 23 June 2010 - 01:54 PM.

[louiec3]

As some of you may know I have been working on a new longshot for a while, 5 weeks to be exact.

This was meant to be my new primary replacing my other Longshot. It was also time for me to test my skills and hand painting, so it's also my first paintjob.



Last picture is it next to my faithful Longshot which it is replacing.
* the picture of the front is like that because the tank was twisted slightly when I put it in, but that is how the turret lines up.

Features
-Awesome paintjob
-McMaster PETG barrel
-My style breech
-Integrated overhauled 3k with 2k pump
-90ft LS ranges, and 100ft 3k ranges with felt and washer darts

This took me forever I had to use two 3k tanks, and two 2k pumps, the tubing took over 5 tries to get right eventually using superglue (Thanks Ryan), the clear coat almost ruined the paintjob so I had to fix it up, the barrel was too tight originally so I had to remake that, and last but not least the bondo just got everywhere.

[Noodleownz]

Excellent work Lou.

Here's a spiderman blaster I just modified. It's a springer.



It has a 4 inch petg barrel nested in 4 inches of 1/2 inch pvc. AR removed, peg removed. Hot glue underneath the barrel, to keep it straight.
It achieves ranges of 40 feet. Perfect for a back up shot.

Edited by Noodleownz, 23 June 2010 - 05:43 PM.

[SonReeceSonJensen]

Here is a simple CPVC barrel replacement for a guy in my office. Good for cube to cube shots with stock ammo.


The arsenal in one of my companie's other offices.

[sublimedom777]

Contract #3 for NerfMonkey, and it's not Lisa Frank this time!

Pussy Stomp:








Needs a few touch-ups, but is essentially done.

[Daniel Beaver]

A Titan pistol. This gun was a lot of fun to make. The pump is a bike pump from Kmart, and it works very well.

Edited by Daniel Beaver, 25 June 2010 - 10:50 PM.

[Zorns Lemma]

ZOMG LATHES SO COOL

[catmods]

The main vid, modifying some Rf20's.

Heres a video making this.

http://www.youtube.com/watch?v=E-IFXKbsYa4&feature=channel
Please leave comments/ P.M.s?

[Wes7143]

My Triple shot.



She takes it from the rear.

[nerfer9]

Sexy? Just wait until I add the fake wood and the gold.

[Twitch]

Viscount Shamus MyCocksafloppin








and some UV exposure, to get an idea of what she looks like in the laser tag arena.

[Roger Explosion]

That's a damm good lookin' Titan there Twitch


Half a clear Raider

[Abyss Mods]

Just your average NiteFinder. Minimized, couplered, and spring replaced with a piece of [k26]. And I Sharpied parts of the plunger tube black 'cause it looks cool.

And yes, I like Altoids!

Edited by Abyss Mods, 28 June 2010 - 09:40 AM.

[ultimatenerf 320]

My 2k, going to get a personal touch to it soon.

And because I don't feel like making the 2k turret reloading.........................................


Big blast:

[Soothsayer]

The pictures are complete shit and do this beast no justice. It says "SoothSlayer", which was a buddy of mine's idea. Of course it also has my clan's symbol on both sides, as well as still having Bettie Page.

The rope is this extremely soft kind I found at meijer, feels great when you're aiming.

I've been fine tuning this thing forever, and I still don't think it's as finished as I would like it to be, I plan on adding some type of gun to the front of it. It gets 100ft+ efficiently, but I rarely find myself being a buster and shooting anyone from anymore than 50 or 60 feet away. This thing is "eye rapingly colorful" according to a few people at last saturdays war haha

[Vengeful Waffle]

Ball-Barrel Cobra.

[ice]

MAVCON
Yes, there is no reason to integrate these two blasters. I just thought it would be fun






(thats wood, not cardboard)


Part 1

Part 2

Edited by ice, 30 June 2010 - 10:19 AM.

[BritNerfMogul]

Brit got quadshot. Is happy now



So far, I've removed the AR's, and added an o-ring to the PT.
Need to order some more brass to fix the turret, I'm keeping the 3 shot feature. Also going to build a wooden stock.

PS - these are the original lanard ones, not the airzone ones. There's no real difference, but if you are desperate for a lanard one, hit me up with a PM.

Also, My first paint job in a LONG time. I'm waiting on a delivery of 3 Ironman Firefly's, so I practiced my paint scheme on this old busted mav

Edited by BritNerfMogul, 30 June 2010 - 03:01 PM.