My little brother painted his Recon, but doesn't have an account, so he asked that I post it.
-
It's his second attempt at painting. He's coming along well, no?
Edited by Eik, 26 October 2010 - 04:27 AM.
Modification and Paintjob Pictures
POST PICTURES ONLY. How hard is that.
Started by J cobbers, Oct 19 2005 06:03 PM
5162 replies to this topic
#3051
Eik
-
- Members
- 120 posts
Member
Posted 30 April 2010 - 01:12 PM
NerfRogue, that is a beautiful weapon. nice work.
My little brother painted his Recon, but doesn't have an account, so he asked that I post it.
-
It's his second attempt at painting. He's coming along well, no?
My little brother painted his Recon, but doesn't have an account, so he asked that I post it.
-
It's his second attempt at painting. He's coming along well, no?
#3052
Anima
-
- Members
- 92 posts
Member
Posted 30 April 2010 - 05:23 PM
Hey guys. S'been awhile.
On the web, your language skills are your appearance and odor. Don't be a smelly elephant man.
#3053
Forsaken angel24
-
- Contributors
- 2,472 posts
Member
Posted 30 April 2010 - 06:02 PM
Anima! Welcome back buddy!
Here's a decent photo of the second Lancer that I made ages ago.
Here's a decent photo of the second Lancer that I made ages ago.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#3054
Hi Yah
-
- Members
- 294 posts
Member
Posted 01 May 2010 - 08:47 AM
Here's my nitefinder rifle.
And here's it primed.
Any questions and comments please PM me.
And here's it primed.
Any questions and comments please PM me.
The yellow balls are also slightly smaller in diameter than the green ones.
#3055
ModSquad
-
- Members
- 102 posts
Member
Posted 01 May 2010 - 02:01 PM
Ignore
Edited by ModSquad, 01 May 2010 - 03:00 PM.
QUOTE
"Roger Ten Niner, we got a rainbow four klicks out. I'm casting the rod."
"Roger Squad Leader. Sending in back up."
"Roger Ten Niner. We have a confirmed bite. I repeat, a confirmed bite"
"Good job boys, lets real it in and go home"
"Roger Squad Leader. Sending in back up."
"Roger Ten Niner. We have a confirmed bite. I repeat, a confirmed bite"
"Good job boys, lets real it in and go home"
#3056
sistermol
-
- Members
- 282 posts
Member
Posted 01 May 2010 - 02:26 PM
Here are a few old paint jobs.
Dude resize those pictures, they are slowing down my computer.
How the expand a blast is held.
Edited by sistermol, 01 May 2010 - 03:52 PM.
Without darkness how would we recognize the light?
#3057
Lucian
-
- Members
- 446 posts
Member
Posted 01 May 2010 - 04:47 PM
Overhauled 3k for Silencer:
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3058
Pearson2
-
- Members
- 161 posts
Member
Posted 01 May 2010 - 07:14 PM
For those that don't have a Spiderman Dart Tag Blaster the marvelous salvo can be made with Hornet internals. It just takes alot more work. Check it out.
Detachable Big Blast Barrel.
How the heck did the guy who did the Marvelous Salvo fit everything into the big blast shell anyways?
Detachable Big Blast Barrel.
How the heck did the guy who did the Marvelous Salvo fit everything into the big blast shell anyways?
Crooked: Did you see that guy who singled a doomsayer?
Pearson: Why would you single a doomsayer? Thats like taking a Ferarri and putting family seating in it.
Pearson: Why would you single a doomsayer? Thats like taking a Ferarri and putting family seating in it.
#3059
louiec3
-
- Members
- 316 posts
Member
Posted 01 May 2010 - 08:23 PM
I finished a BBB earlier today. It has a nice breech, and replaced plungertube, and plunger rod it is similar to how Zorn did his.
#3060
Eik
-
- Members
- 120 posts
Member
Posted 01 May 2010 - 10:59 PM
The Arctic Camo Longstrike
-
-
-
Comments? Criticism?
-
-
-
Comments? Criticism?
Edited by Eik, 26 October 2010 - 04:25 AM.
#3061
SpectreX
-
- Members
- 75 posts
Member
Posted 02 May 2010 - 01:53 AM
Yes, it's a fully functional Raider priming grip slapped onto the side of a LS/DTB integration. I can do a write up if people want one, but if you have the technical abilities to make a LS/DTB, these pics should be all you need.
#3062
Lucian
-
- Members
- 446 posts
Member
Posted 02 May 2010 - 07:19 PM
It's done:
Ranges: Far
Ranges: Far
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3063
Eik
-
- Members
- 120 posts
Member
Posted 02 May 2010 - 07:28 PM
Royal Camo Tetrastrike
-
-
-
-
Edited by Eik, 26 October 2010 - 04:24 AM.
#3064
nerfer63
-
- Members
- 386 posts
Member
Posted 02 May 2010 - 09:41 PM
N63's got a new primary I dub thee "poor poor mans doomsayer". If any one is interested in a write up pm me and I can make one.
#3065
PETGrevolution
-
- Banned
- 37 posts
Member
Posted 03 May 2010 - 06:53 PM
Call me Rev
You call a wrap of e-tape a modification? It is just there to keep the breech more secure. Wow, you really are mentally retarted(Ryan Mcnumbers). -Nate the Great
Do it yourself and then come back.
Otherwise, Fuck off.
-Ilzot
You call a wrap of e-tape a modification? It is just there to keep the breech more secure. Wow, you really are mentally retarted(Ryan Mcnumbers). -Nate the Great
Do it yourself and then come back.
Otherwise, Fuck off.
-Ilzot
#3066
Zachfrog
-
- Members
- 54 posts
Member
Posted 03 May 2010 - 08:33 PM
My Marshmallow Shooter
http://www.flickr.co...N04/4576973740/
It has a 1/2" CPVC coupler for removable barrels.
http://www.flickr.co...N04/4576973806/
http://www.flickr.co...N04/4576340383/
http://www.flickr.co...N04/4576973976/
I made a stock out of 3/4" PVC and the bolt cover of a Longshot. It is detachable and is connected by a 3/4" endcap that is screwed into the shell.
http://www.flickr.co...N04/4576340409/
http://www.flickr.co...N04/4576340383/
I also put a barrel holder made out of a 1/2" CPVC endcap and a 1/2" long piece of the LSFG front barrel.
It constantly gets 55' with streamlines.
Questions? Comments? Flames?
(Pictures weren't working, not sure why.)
http://www.flickr.co...N04/4576973740/
It has a 1/2" CPVC coupler for removable barrels.
http://www.flickr.co...N04/4576973806/
http://www.flickr.co...N04/4576340383/
http://www.flickr.co...N04/4576973976/
I made a stock out of 3/4" PVC and the bolt cover of a Longshot. It is detachable and is connected by a 3/4" endcap that is screwed into the shell.
http://www.flickr.co...N04/4576340409/
http://www.flickr.co...N04/4576340383/
I also put a barrel holder made out of a 1/2" CPVC endcap and a 1/2" long piece of the LSFG front barrel.
It constantly gets 55' with streamlines.
Questions? Comments? Flames?
(Pictures weren't working, not sure why.)
QUOTE(Lion @ Jun 11 2010, 03:19 PM) 
QUOTE(Talio @ Jun 11 2010, 04:44 PM)
They didn't have monitors in 1920.
They did, They just called them Windows back then though.
#3067
Vengeful Waffle
-
- Members
- 152 posts
Member
Posted 03 May 2010 - 10:04 PM
Yo I'm a fanboi
I'm a runner, and I like to run.
[18:46] <+Famine> With the cock ring coming out the back of it?
#3068
Eik
-
- Members
- 120 posts
Member
Posted 04 May 2010 - 01:47 AM
Finished a Blue tigerstripe Nitefinder commision for a friend
-
-
Edited by Eik, 26 October 2010 - 04:23 AM.
#3069
NerfRogue83
-
- Members
- 646 posts
Member
Posted 05 May 2010 - 10:37 PM
Deploy Sneak peaks.......
Before-----
With lame 3D logos....
After-----
Bye Bye logos......
EDIT---More progress----starting to take shape?
Deploy CS-6.......Na, that had to go!------Deploy + Roll Out!
Before-----
With lame 3D logos....
After-----
Bye Bye logos......
EDIT---More progress----starting to take shape?
Deploy CS-6.......Na, that had to go!------Deploy + Roll Out!
Edited by NerfRogue83, 06 May 2010 - 07:54 PM.
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!
Rknight-- wow......N9---your dad is in trouble now!
#3070
Hi Yah
-
- Members
- 294 posts
Member
Posted 07 May 2010 - 08:22 PM
Here's a standard big blast that I made a while back.
It has a 1/2" PVC coupler.
And here's a pict with a 1' long 1/2" CPVC barrel, nested in a stub of 1/2" PVC. The CPVC has been drilled out with a 1/2" spade bit, for a looser fit on my darts.
It gets good ranges. I also replace the stock o-ring with a #17 Danco o-ring. The over pressure release valve now kicks in at about 7-8 pumps.
Any questions or comments please PM me.
It has a 1/2" PVC coupler.
And here's a pict with a 1' long 1/2" CPVC barrel, nested in a stub of 1/2" PVC. The CPVC has been drilled out with a 1/2" spade bit, for a looser fit on my darts.
It gets good ranges. I also replace the stock o-ring with a #17 Danco o-ring. The over pressure release valve now kicks in at about 7-8 pumps.
Any questions or comments please PM me.
The yellow balls are also slightly smaller in diameter than the green ones.
#3071
Eik
-
- Members
- 120 posts
Member
Posted 07 May 2010 - 11:06 PM
Another NF commision, tried some new techniques...
-
-
Edited by Eik, 26 October 2010 - 04:22 AM.
#3072
Hi Yah
-
- Members
- 294 posts
Member
Posted 08 May 2010 - 07:21 PM
A teaser.
Minimization.
Replacement plunger head.
Held on with a 6-32 bolt and a nut on the other end.
1" PETG plunger tube from Petco.
The new plunger head not only gives a better seal, it also increases plunger volume. I would estimate that the new plunger head adds 1/4" plunger travel. Yes, there will be a write up. And, yes this will get a plunger draw extension, just like in my previous write-up.
Minimization.
Replacement plunger head.
Held on with a 6-32 bolt and a nut on the other end.
1" PETG plunger tube from Petco.
The new plunger head not only gives a better seal, it also increases plunger volume. I would estimate that the new plunger head adds 1/4" plunger travel. Yes, there will be a write up. And, yes this will get a plunger draw extension, just like in my previous write-up.
The yellow balls are also slightly smaller in diameter than the green ones.
#3073
Anima
-
- Members
- 92 posts
Member
Posted 09 May 2010 - 11:43 AM
This is the inverse twin of the maverick I posted earlier.
http://www.flickr.co...205559/sizes/l/
The recipient for this gun is Elly, thus the corrupted spelling on the slide. I used a tightly-wound Ace bandage and a clamp to press the leather tightly enough to the grip to get the detailing to show through. Adhesive: tacky glue.
http://www.flickr.co...205559/sizes/l/
The recipient for this gun is Elly, thus the corrupted spelling on the slide. I used a tightly-wound Ace bandage and a clamp to press the leather tightly enough to the grip to get the detailing to show through. Adhesive: tacky glue.
On the web, your language skills are your appearance and odor. Don't be a smelly elephant man.
#3074
NerfRogue83
-
- Members
- 646 posts
Member
Posted 09 May 2010 - 08:10 PM
Another Brass breeched Deploy finished......
Yes, it still transforms just as well as stock.
Yes, it still transforms just as well as stock.
IRC chat: louiec3-- he offered $500 for someone to build a bomb he could send to his ex wife
Rknight-- wow......N9---your dad is in trouble now!
Rknight-- wow......N9---your dad is in trouble now!
#3075
TED
-
- Administrators
- 1,339 posts
In Brightest Prawn, in Darkest Shrimp...
Posted 09 May 2010 - 09:33 PM
Battle Max Sceptor v1.0
It's the tits.
Star Wars can go fuck itself.
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users
