^Looks awesome. I'm liking the shotgun attachments. I'm assuming those would be helpful during DTC rounds^
Anyway...my take:
The Totally Awesomesauce Unnamed BBBB
Got the idea from zorn's BBBB above awhile back, and decided to make my own. Hole in the front was
almost perfect...missed by a little bit:
The pump I used is a bike pump and a little smaller than Zorn's, I believe. This one's dual action though, so it makes up for what it lacks in volume. I use 7-8 pumps. I've pumped it up to 12 before, and probably could pump it up more than that, but I really just don't...7-8 shoots pleanty far. Speedloader's new, suggested by Zorn. I usually use 4" of 17/32" in 12" of PETG, but I tried this out, and it hits better at 7 pumps than the other at 9.
In both locations, tubing had to be twisted in, so it was first superglued in place, then covered with a layer of goop, then 48 hrs. later followed by epoxy putty. Tubing's joined outside with the barbed adaptor. No glue or anything. Holds up just fine. mine's just external simply because it makes my life loads easier, and if I ever want to remove the tank, I can muscle the barb out of the tubing. If it were a continuous length, it'd be stuck because the pump is fixed.
Detatchable, adjustable Firefly stock. This portion makes this blaster one of the most comfortable I own. There's a coupler secured to both the gun and the stock, so I can use different lengths of PVC to suit different blasters. This is all I really have though so far that I use it on, but I'll definitely be making some more blasters to accept it.
Again, credit to Zorn for the original idea, and a great one, too.
EDIT- Yeah, those are my basement stairs, I know they're kinda dirty.
Edited by diamondbacknf1626, 05 December 2009 - 09:54 AM.
