5162 replies to this topic

[Mr BadWrench]

[nerfer75]

My modded LS front gun. Ranges are average: about 30' with a good, stock dart. I am selling it. Go here for the sales thread.

Edited by nerfer75, 25 May 2009 - 03:07 PM.

[BritNerfMogul]

Commission job for a friend. He wanted something m4 based.






Only on it's first coat of paint, second coat going on soon. Also working on a AT3k Scatter scope ala Rogue for an underslung grenade launcher.

Edited by BritNerfMogul, 18 June 2009 - 07:16 PM.

[jerm78]

My Nerf Triple Strike

Edited by jerm78, 23 May 2009 - 08:26 AM.

[cheesypiza001]

Lock N' Load Plunger rod with 2 neoprene washers as the plunger head seal.

Neoprene Washer:
1" - O.D.
7/16" - I.D.

It gives it a PERFECT seal. I can fire the LN'L with my finger over the brass barrel and the plunger rod goes half way and just stops there until I release my finger.

Here's the complete Lock N' Load.

Edited by cheesypiza001, 23 May 2009 - 08:37 PM.

[iMod1]

I just recently finished an LS for a birthday. It's actually pretty nice for just using reverse stencil with painter's tape.



Mods Done:
AR removed
NF Spring with additional smaller spring (to keep it from rattling around inside)
Now fires taggers as well as streamlines
Replaced Barrel

If you are wondering about the spray paint, it's Krylon Ultra-Flat Camoflauge. It has the Fusion technology so I don't need glossy clear coats.

Whatcha think Brit?
-iMod

[cheesypiza001]

[Zorns Lemma]

ChANO 2 saw 2 new guns, and as of this moment, my only assembled and working non-stock blasters:




BBB has a replaced plunger head, spring overhaul, and a bunch of internal reinforcements to handle the ~36 lbs of draw force. NF is fairly standard mods, with the exception of a 1/2" PVC coupler rather than CPVC coupler.

BBB linked breech is a fairly standard 17/32", 9/16", and 19/32" brass and 1/2" SH40 PVC slide-breech with PVC tee to CPVC elbow. Around the dart slot area, I have the 1/2" PVC cut to fit the clip similar to the ones HeretiCorp was selling a while ago, and around that is 3/4" SDR 200 PVC to stabilize the LS/recon mags.



Fairly simple, as I whipped both guns together in around 4 hours from 1 AM to 5 AM the night before/day of the war.

[soccerbeast003]

My near-finished snapbow with an AT2K attached on the underside:

I would also like to stress how important it is to lube the snapbow.

Edited by soccerbeast003, 24 May 2009 - 02:35 PM.

[hopper055]

This is my long shot with under mounted at2k.


Edit: I re sized the pictures before I posted them. They just have not been re sized on here yet.
Edit 2: Ok they re sized.

Edited by hopper055., 24 May 2009 - 09:18 PM.

[ace of nerf]

Crossfire, made for a friend.

[Wes7143]

[CrackerJak]

CPVC barrel modded Big Salvo.
Flat Ranges (30 pumps):
Tagger or screamer: 65-70
Streamline or top removed tagger: 70-80
Stefans: 70+

Edited by CrackerJak, 25 May 2009 - 05:43 PM.

[TED]

Pas with +bow spring, new handle, and duct tape on it.

[berserker]

My first legit post.

Info: I'm a Senior at Virginia Tech studying Biological Sciences. I lived for 19 years where Captain Slug is, but I've moved since then to some crappier place in Georgia.



Name: the Tonbogiri
Mods Done: Reinforced plunger head, cut off the front sight.
Integrations: None. Though I'd love to find those spiderman wrist blasters and try something with those.
Comments: I was going to make it take Longshot magazines like boom13 did, but mine didn't work out quite right. I'm too new at making barrels to make a tight seal on the breech. I've left the top bar on with a coupler in case I ever want to retry. Furthermore I've added 2 Buzzbee shells as ammo holders, they're hotglued together and then velcroed to the gun in case I don't want them for some reason. The top cpvc rod is slightly crooked, so it makes the barrel SEEM crooked, but its perfectly straight.




Name: Fist of the Beast King
Mods Done: Roulette mod, ARs removed, straw mod, 2 pennies and a dime added, barrel rotation clutch was tightened.
Integrations: N/A.
Comments: I just repainted this one tonight. The last time I did it the barrel was white, as well as the handle and the cocking slide. The white got dirty too easily so I repainted it. I stripped too many screw heads off to be able to open up my white cylinder, so I stole the cylinder and screwheads off a gun that I had given to a friend and was still holding for her. :X

Edited by berserker, 26 May 2009 - 09:52 PM.

[nerfnut23]

My favorite gun, soon to have a sidearm that matches.

Zar'Roc



It has a BBB & LS spring, ARs pulled, a 99.999% done Angel Breech, damn glue won't cure fast enough. Oh well. And,

The last thing you ever want to see. Ever.

Also, I reinforced the boltsled with fiberglass. And Mehku, you're welcome with the instructions for the fiberglass reinforcements.

Edited by nerfnut23, 27 May 2009 - 12:12 AM.

[jerm78]

Edited by jerm78, 20 June 2009 - 11:09 AM.

[Lt Stefan]

Some old stuff

My Titan mkI. A whole host of different attachments (not pictured)


Big Blast with a couple attachments have since added shotgun and PETG breech.

[jerm78]

Edited by jerm78, 20 June 2009 - 11:08 AM.

[HeracrossKid]

Lucy II, the the bastard child of a bastard Guru...*sigh*





3B gets high 80's
double-barreled NF gets 40's (It's an altered version of THIRST's mod)

[Daniel Beaver]

I was playing around with my SuperMAXX 350 today and threw some CPVC couplers on the front, as well as widened the airflow path between the plunger and the turret. I wanted to experiment with barrel lengths, and found that my ranges maxed out at 40' with 1.5" barrels. Meh.

[nerfchild]

Well here's mine so far. BBB spring AR removal. Think I'm gonna try to single it.



I added an aperature sight from one of my airsoft rifles.



Thanks,
Nerfchild

[Ice Nine]

Yeeeah.

It has been dubbed "Metroid Prime," because the second thing exclaimed by an acquaintance after "Holy shit!" was "It looks like an alien!"

Edited by Ice Nine, 30 May 2009 - 02:52 PM.

[atomatron]

So I took a BBB and added a SM750 to it, the pump is integrated into the top portion of it and is pumped by holding the trigger on the BBB down and pretending to cock it four times then fired by means of a trigger I made from some wire.


This is possible because the draw of the BBB is 3+1/2" and the pump for the SM750 is about 4".

[A side of nerf]

In due time my lads, in due time...