Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4776 exxodus

exxodus

    Member

  • FNG1 
  • 1 posts

Posted 11 August 2014 - 05:12 AM

Hello all ... This is my 1st mod & paint job. This is a Stryfe with new motors / heavy duty wiring & runing on 9v ). This is also my first try at painting. My idea was to keep the original design, adding some more realistic paint job, but with a touch of "used cnodition" as it was already used on many battlefields.


Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Note: On the 4th photo, this isn"t "original blue" going thru the paint but the sky refecting in the paint ..."
  • 0

#4777 Guest_TheSilverhead_*

Guest_TheSilverhead_*
  • Guests

Posted 12 August 2014 - 08:19 PM

Just finished a Sweet Revenge for a friend who doesn't want a pink gun. Shh, don't tell her I put LED's in it, she'll hit me. They are actually blindingly bright- the camera can't capture it at all.
Posted Image
Posted Image
  • 0

#4778 SolarFusion

SolarFusion

    Member

  • Members
  • 139 posts

Posted 15 August 2014 - 06:17 PM

XD This thread has been running for over nine years now? That's funny.

Well, here's my contribution:
Posted Image
This is my third mod, an Elite Jolt. It has had a standard AR Removal and O-ring greasing and I am achieving an average of fifty two feet angled with my stefans.
Posted Image
This was my very first mod/paintjob. It got an AR removal, spring stretch, O-ring grease, mini clip, and lock removal. I have not done any range tests with my homemades however I was getting upwards of fifty feet angled with un-modded streamlines when I finished the project.
Posted Image
This is my second most recent job. It got AR removal, lock removal, spring stretch, O-ring grease, removable stock mod, and the lengthened barrel for looks. The barrel extends about another foot and a half past where the stock extension ends. the total length of the extension being about two and a half feet long. I get about forty five feet angled without the extension and about twenty with the extension on.
Posted Image
And here it is, my most recent(and adventurous)mod to date. It got AR removal, spring stretch, O-ring grease, pin removal, and most importantly; the voltage increase. I has a total of eighteen volts hooksed up to it and man, does that thing blast! I would estimate about 400-500 rpm on this thing. The drawback is that with the speed of the motor, it needs some help feeding the belt through otherwise it will skip a few rounds in the center of a belt. No biggie though.

I also have a Maverick that has been finished for a year however it has been partially dismantled for an LED job. Pics later.

I would be interested to hear your opinions!

-SolarFusion

Edited by SolarFusion, 15 August 2014 - 07:08 PM.

  • 0

#4779 Boris99

Boris99

    Member

  • Members
  • 28 posts

Posted 21 August 2014 - 07:21 PM

So i started this project a while back while i was bored, but after almost a month of work, I have finally finnished it. I am very happy with how it turned out and I love the franken-blaster look. Everything is explained in the video, watch the whole thing for an "in a nutshell" kind of mod guide, or jus watch the last half for a review. Hope you enjoy!
Posted Image[/img]
https://www.youtube.com/watch?v=Eb2ykD6QUpM

Edited by Boris99, 21 August 2014 - 07:24 PM.

  • 0
I like apples!

#4780 SBG

SBG

    Member

  • FNG1 
  • 1 posts

Posted 23 August 2014 - 04:57 PM

So, this was my first mod that I began a while ago around May. The mods that I did to it were simple: an AR removal and a lock removal. It works very smoothly and hits around 50ft flat with streamline darts. Also, this was my first blaster that I painted so it's not the greatest paint job but it's pretty good. Posted Image

Edited by SBG, 23 August 2014 - 05:12 PM.

  • 0

#4781 clownieX

clownieX

    Member

  • Members
  • 104 posts

Posted 24 August 2014 - 08:51 PM

Don't normaly post such a simple mod, but I haven't seen one yet. Stock spring and seal improvement. 1/2 cpvc coupler, shoots pretty good. Dark, so no ranges.


Posted Image
  • 0

#4782 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 27 August 2014 - 09:22 PM

Posted Image

Posted Image

Posted Image

Posted Image

Shotgun mothafucka

Videooooo

Edited by Aeromech, 27 August 2014 - 09:23 PM.

  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#4783 Guest_TheSilverhead_*

Guest_TheSilverhead_*
  • Guests

Posted 28 August 2014 - 08:30 AM

Teaching my roommate to spraypaint. Lesson one: Gradients and splatters.
Posted Image
Posted Image
  • 0

#4784 tbr

tbr

    Member

  • Members
  • 4 posts

Posted 28 August 2014 - 09:52 AM

Finally got around to finishing this one, as with my previous modification, this one was going to be a clean and crisp paintjob until something went wrong :roll:

Posted Image

Posted Image

Posted Image
  • 0

#4785 xXasskickerXx

xXasskickerXx

    Member

  • Members
  • 18 posts

Posted 01 September 2014 - 02:43 PM

This is my custom longshot : the reaper. It has a BBB spring in it , the ar removed , the slide unlocked, bondo in the grip and the case cut down.
The paint job is only one color and I sanded off parts of the paint to make it blue. It shoots 90-100 feet angled
The Reaper
  • 0
-kika

#4786 Bro Juice

Bro Juice

    Member

  • Members
  • 63 posts

Posted 01 September 2014 - 07:34 PM

This is my modded hammershot, dubbed the Hammertime Rev-5. U can't touch this.
Posted Image
  • 0

༼ つ ◕_◕ ༽つ
 


#4787 481IceDragon

481IceDragon

    Member

  • Members
  • 245 posts

Posted 02 September 2014 - 06:50 PM

Well I got sick of a few people on this forum so I took a year hiatus.
First attempt painting one in a year and I would say Ive still got it!

Posted Image

Posted Image


Posted Image
  • 0

#4788 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 613 posts

Posted 03 September 2014 - 08:06 PM

Here's a pretty basic Sidewinder compatibility mod for Nerf darts (Tagger, suction, streamline, elite, whatever):

Posted Image

Much easier than getting a Tommy 20 or similar to accept Nerf darts, where much more material must be removed AND the flywheels must be relocated farther forward AND it still can't handle streamline darts. Still requires hollow foam darts (ie, not most homemade darts), as the tight part fits the inside on a short peg at the base of each dart hole on the magazine. With great care one could remove all of these pegs, and then nest a tighter barrel material in each socket, but that's too much work for me.
  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#4789 nisaburo

nisaburo

    Member

  • Members
  • 400 posts

Posted 03 September 2014 - 09:38 PM

*
POPULAR

Posted Image
The last war I attended made me realize I didn't have a nice pistol. Fixed that.
  • 1

#4790 Jeef

Jeef

    Member

  • Members
  • 25 posts

Posted 05 September 2014 - 07:06 PM

Posted Image
My Singled Longshot with an intagrated Maverick

Link to full review on my website:
https://sites.google...intagration-001

Edited by Jeef, 19 September 2014 - 07:18 AM.

  • 0

#4791 Jeef

Jeef

    Member

  • Members
  • 25 posts

Posted 05 September 2014 - 10:24 PM

Posted Image
Posted Image
My Overhauled Supermaxx 1500

Link to full review on my website:
https://sites.google...-supermaxx-1500

Edited by Jeef, 19 September 2014 - 07:16 AM.

  • 0

#4792 Steven firefury

Steven firefury

    Member

  • Members
  • 3 posts

Posted 06 September 2014 - 01:16 AM

My Singled Longshot with an intagrated Maverick

Awesome! Do they both work at the same time?
USER WAS WARNED FOR THIS POST

Subtitle of the thread is "POST PICTURES ONLY. How hard is that."

Edited by Zorns Lemma, 06 September 2014 - 11:15 AM.

  • 0

#4793 Green Wing

Green Wing

    Member

  • Members
  • 68 posts

Posted 10 September 2014 - 06:40 PM

Posted Image

Lanard TripleShot with removable Scatterblast integration. More Pictures

Video showing the full build and firing

Edited by Green Wing, 10 September 2014 - 06:42 PM.

  • 0

#4794 Jeef

Jeef

    Member

  • Members
  • 25 posts

Posted 15 September 2014 - 01:11 PM

Posted Image
Posted Image
My Hearthstone Themed Nite Finder. LEDs and Flashlight operate off 9v battery in handle and go through switch on 2nd picture

Link to the full review on my website
https://sites.google...one-nite-finder

Edited by Jeef, 19 September 2014 - 07:14 AM.

  • 0

#4795 geekytyrant

geekytyrant

    Member

  • Members
  • 3 posts

Posted 16 September 2014 - 08:20 PM

hello nerf haven!!!!


This is my first post here. I am relatively new to the world of modding nerf guns but by no means new to nerf. Last Christmas, i ended up buying some of the zombieforce guns for my nephew and fiance's son....and myself....after all you must be armed and ready for any attacks. Naturally as it happens with children, they ended up sitting around for about 5 months till i was looking at the Hammershot sitting in the closet and thought, Man i could probably paint this bad boy to look amazing....well better at least. I started going through my paint and what not, being and artist and all i had an arsenal already waiting for me. The first one i painted was the Hammershot, went with a green and black look and added some medical tape to cover the "taped" grip that was already their. I ended up removing all the posts and AR. I left the spring as it was just because i wasnt using it for anything but for show, it was just my first time modding so i wanted to play a little. I ended up taking my dremel to it a bit also, adding some dents and what not. Ended up removing the warning labels and hammershot font, left the NERF on the side so that if it ended up in public people didnt freak.

Posted Image
Posted Image
Posted Image

This was one i did for my nephew. i painted it like how he told me, i let him go with what he wanted
i removed the dart posts and AR only, but i left the orange bits because he would be running around on his street shooting his friends

Posted Image
Posted Image

Now this one i painted on a commission. They wanted a Titanfall themed Roughcut. This one i left everything on the inside because they wanted the staged firing mechanism. They let me have free reign with this so i did so. i ended up bringing it into photoshop and then just laid color over the natural lines and saw what worked the best. I ended up going with the theme that is presented on the xBox one controller. Being that the pump action was the prime function of the gun, i left the area in which the grip flows over unpainted and used the white that the gun already had there. Other than that i went to town on the gun with my airbrush and added a little dirt and muck to show that its been used out in the field and have been knocked about.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

im looking forward to doing more just out of the shear fun it is to get these things looking different. Currently i have two more guns in the works, one is a commission of the Star Loards blaster and the other is a gun for myself because i just like the small nature of the blaster..


please let me know what you guys think, comments....complaints....commissions ;)

  • 0

#4796 zack0909

zack0909

    Member

  • Members
  • 120 posts

Posted 17 September 2014 - 07:03 AM

My UMB with a 20 inch petg barrel

Posted Image

Edited by zack0909, 17 September 2014 - 07:04 AM.

  • 0

#4797 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts

Posted 21 September 2014 - 02:30 PM

Some shit I did whilst I was banned, I wish i could say it's good to be back.

180 Rapid Red with 5 tone paintjob, rubberized grips, faux mother-of-pearl grip inlays, 40mm PC fans, and voltmeter. Oh, added a barrel attachment port and a 3/4in coupler to serve as a DIY stock attachment port.

Posted Image

Posted Image

Incomplete 180 Hail-fire with 3 tone paintjob, rubberized grips, custom advance handle (this was a thrift find w/out it), and voltmeter.

Posted Image

Posted Image

The Hail-Fires voltmeter is green, the Rapid Red's is... red.

Both are averaging 123.7feetpersecond and fire frozen ropes with my Koosh darts.

Edited by Duke Wintermaul, 21 September 2014 - 02:34 PM.

  • 0

#4798 RetroSketch

RetroSketch

    Member

  • FNG1 
  • 1 posts

Posted 22 September 2014 - 03:54 PM

So I purchased a stock Mega Centurion.
And Made It my own.
Let me know what you think.

I also removed a grand total of 8 safties/locks.
Posted Image
Posted Image
  • 0

#4799 Guest_hoellenhamster_*

Guest_hoellenhamster_*
  • Guests

Posted 23 September 2014 - 06:21 PM

Hello!

Since I am new here I am going to get most of the things I have done in the past out of the way in one post. Most of the work went into cosmetics but with the exception of the Hammershots everything has also been modded performance-wise.

I have done a number of RSCB Buzz Bee Rapid Fire Rifles. Amazingly enough this (along with the Hunter and the Hawk) might be the only blasters that gain a significant range boost from the RSCB because it is actually more efficient in terms of air flow, deadspace and barrel length than the original system (because the original system is horrible). All of them have a stronger spring and work using a RSCB with most being breech loaded (breech consists of 19/32" brass to hold the darts and a 9/16" "plug" that is directly connected to the lever) and gravity fed while one is front loaded and has a spring installed to auto-feed the darts (I believe nihil413 is the one who originally came up with that concept). They get around 60' flat with shortened Elitedarts (1 inch).

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

The Lanard Triple Shot has been made into a Quadshot that shoots the fat Lanard Darts. PM me if you have seen this before because I think I may have been the first to do that. The Torrent has been rebarreled and can be rear loaded but is still lacking a nice pump-grip. The Fury Fire has Nite Finder internals and has been rebarreled using 17/32" brass. The Nite Finder is pretty much just couplered.

Feel free to PM me if you have any questions =) Hope this wasn't too much of a picture-dump for my first post - these tmods have been accumulating since 2012.

Edited by hoellenhamster, 23 September 2014 - 06:33 PM.

  • 0

#4800 Lord Draconical

Lord Draconical

    Member

  • Members
  • 63 posts

Posted 06 October 2014 - 03:33 AM

Posted Image

Rayven w/integrated magnus, motor swap, full rewire and black / gray paintjob/

Hammershot is a destiny inspired replica, almost purely cosmetic.
  • 0

// V''''V



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users