Modification and Paintjob Pictures
#4226
Posted 17 October 2012 - 12:49 AM
Wired in parallel, powered by 12 AA batteries housed in the lower blaster
Batman Blastfire:
Now with 100% more stock and integrated lights!
#4227
Posted 17 October 2012 - 12:55 AM
next is my OMW unleashed stages 1 and 2 recon. made a custom grip out of the foregrip of a quick 16 and the rail piece off of a strikefire. lots of bonding agents were used. i really like metallic blues, so i threw some on there along with some black. turned out better than expected. also decided to use the praxis stock instead of the recon stock.
#4228
Posted 17 October 2012 - 08:57 PM
I couldn't find a 3/4 to 1/2 reducer, so I just slapped on a CPVC coupler made from an endcap. Clearly I also made an RSCB for it, and cut the top of the elbow in half so that the clip part of the RSCB can lay flat on the tactical rail. It isn't getting that great of ranges compared to it singled, which is due to the clip being way too long. An 8" one would be ideal.
I also took off the black end and fitted a maverick tactical rail in its place. I really like having it there and is worth doing.
I also fitted this CPVC pump handle on, which I secured with e-tape and hot glue. The wye pump handle looks superior, put this one is cheaper and nearly as good. It's now much easier to pump and a whole lot more comfortable.
I haven't seen anyone fit a tactical rail onto one yet, and no one with this type of pump, so I strongly recommend that you do the following mods to yours. I'm also working on fitting a detachable microturret to the front, which beats a speedloader time-wise, and an RSCB range-wise.
Edited by ShaNayNay, 17 October 2012 - 09:03 PM.
New Jersey is fuckin weird
#4229
Posted 17 October 2012 - 10:18 PM
MODS:
O-Ring/Seal Improvement
Custom Shell Cosmetics
Priming Indicator
Full Barrel Drop
Custom Paint
Penny Mod
AR Removal
Edited by clownieX, 01 November 2012 - 11:47 AM.
#4230
Posted 17 October 2012 - 10:36 PM
Rapid fire with rub n buff and tester rust color
Finishing touches with rub and buff edges to make it look beat up
Edited by Silvertooth, 18 October 2012 - 03:56 PM.
#4231
Posted 19 October 2012 - 10:57 AM
Just need a new RFR to finish the whole loadout off.
#4232
Posted 19 October 2012 - 08:22 PM
This is the only flat spot on a UMB. Fortunately that little panel comes off easy so you can Glue N' Screw all night LONG!
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people
I do not play with guns.
#4233
Posted 20 October 2012 - 01:31 PM
Anyways. Contracted longshot (cost me 40 bucks) has brass angel breech, padded plunger, OMW 5kg spring lube. Pretty decent paint job. The only complaint is it took fucking forever! Almost a year!
It reaches ranges of about 75 90 feet, which isn't bad. Could do more with a better o ring and beefier spring, but it's comfortable, and No Risk of breaking the boltsled
I have other things, but nothing really deserves a post at. The moment.
Flame away!
#4234
Posted 20 October 2012 - 01:35 PM
#4235
Posted 20 October 2012 - 02:59 PM
War legal!
100% Dan Beaver's construction, commissioned for the price of taking it off his hands when he moved.
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people
I do not play with guns.
#4236
Posted 21 October 2012 - 03:15 PM
Duplicolor adhesion promoter and games workshop black orange and blue, with silver.
Still need to neaten everyone up, and add some more blue and silver, but other wise, pm me what you think.
#4237
Posted 22 October 2012 - 10:20 AM
This is the other end of the mod exchange with BiWinningPanda, a panther with pvc coupler, purple/yelow paint job, pump handle replacement, and plugged pump. All that I have right now is the video, but that should be sufficient, after all, a picture is worth 1,000 words, so what about a ton if pictures all put together WITH words?!?!?
Just kidding: Of course I have a picture of it being painted...
BiWinningPanda's Panther
Edited by bhajj94, 22 October 2012 - 05:34 PM.
#4238
Posted 26 October 2012 - 02:13 PM
a little bit of a write up on http://www.nerfmodsreviews.com/2012/10/rampage-shotgun-pump.html
Edited by Darthrambo, 27 October 2012 - 11:54 AM.
#4239
Posted 30 October 2012 - 06:38 PM
removed for brevity
that gun is so sexy
This thread is for pictures, not commentary. Furthermore, commentary on these boards is required to use capitalization and punctuation to both improve legibility and indicate intelligence. The conditional probability that your future posts will enlighten this forum, given your previous posts, is low enough to warrant a permanent ban.
Edited by Zorn's Lemma, 30 October 2012 - 07:14 PM.
#4240
Posted 03 November 2012 - 05:51 PM
Stampede swarmfire integration I call cuddlebaby.
Why do I call it cuddlebaby? Because the name just seems to fit
The pictures really don't do it justice:
Front:
Back:
Money shot:
#4241
Posted 03 November 2012 - 09:20 PM
#4242
Posted 08 November 2012 - 07:28 AM
For Greydon, Features include:
-Polycarb Priming bar
-Polycarb trigger
-Polycarb spring rest with the Stock rubber affixed
-Polycarb trigger spring rest
-K18+ Stock spring
-Custom Bushing
-Padded the rear of the Bushing, hardly makes any noise when firing
-Great seal using the stock PH
-bolt through the bushing and shell to keep everything anchored nice and tight
-Splatter Paintjob sealed with a Matte finish
http://www.youtube.com/watch?v=tAP7je0QixI
Hits about 115' Singled.
20:45 Talio penis in vagina
20:45 Talio fin
#4243
Posted 11 November 2012 - 12:50 AM
Just visual appeal.
Edited by Mully, 30 November 2013 - 10:23 PM.
#4245
Posted 11 November 2012 - 09:02 AM
Shoots standard Panther Ranges with one dart in each barrel. 4 darts in each barrel does 70' with a AWESOME spread. 20 pumps on a minimized Magstrike pump.
Will, has desecrated my work of art with a black sharpie. His artwork features 2 very erect penises, 'Suck mah ballz!', 'Blow me!', as well as the abbreviation for his original desired name 'CDA' (Cum Dumpster Abortion).
Bobololo is weird....
20:45 Talio penis in vagina
20:45 Talio fin
#4246
Posted 12 November 2012 - 11:02 PM
camera rig.
Rig Explanation and Build
Test Video with rig
Edited by popatachi, 29 November 2012 - 09:07 AM.
#4247
Posted 14 November 2012 - 03:43 PM
Matching Over-Under Double Shot "rifle" and "pistol."
#4248
Posted 14 November 2012 - 05:43 PM
Buzz Bee Rangemaster
Edited by BuffNerd, 14 November 2012 - 05:46 PM.
Pittsburgh General Rules of Engagement:
1.) Fuck Running
#4249
Posted 16 November 2012 - 09:36 PM
Pump action recon
Power stock with nf spring.
#4250
Posted 17 November 2012 - 05:34 PM
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users