5162 replies to this topic

[taerKitty]

Writeup here.

[Will W4]

Longshot with 2 spring additions (from pop-up sprinkler and longstrike), front-gun integration, modified faux barrel, and normal mods.

Longstrike with OMW stage 1 kit, camo paint job, and standard mods.

Edited by Will W4, 27 October 2011 - 05:47 AM.

[CuppaSteve]

Not-A-Guru Mk. II.

[lionhawk]

Quick 16 with ars removed, increased seal, and plugged air hole. It has a removeable stock that is split 1 and a 1/4 inch pvc.

[LT DAN ICE CREAM]

Because Octoshots are cool. Done the Makeitgo way, with Venom barrel spacers. Still looking for a [k25] for this bad muh-fuh.



Pump replaced BBUMB with McMaster OPRV where the original pump was and quite possibly the sloppiest/lopsided putty work ever. ORPV pops at 35-40 psi.



Last, but not least, rear loading AT2K with 19/32nd brass barrels and Venom spacers. Soon to have an aluminum tank and pump head. Shoots ropes.

[taerKitty]

BumpFire (a.k.a. always-on-SlamFire) HyperFire - internals

and firing video

No externals shot because it looks like a stock HF missing the louvered back part. Now, imagine it upside down, minimized, and under an LS.

===

Edit: This is the final layout, but not the final measurements. In the final configuration, the trigger is fully depressed when the slide is forward. Assemble the blaster, then slowly and carefully ajust the zip tie tail out the back to get the measurements right.

===

Edit: Per discussion with Bob, it seems more sense to distinguish this from SlamFire - with SlamFire, you have to hold the trigger back. With this, forcing the slide forward will discharge the blaster, so it's not exactly the same thing.

Edited by taerKitty, 10 October 2011 - 07:53 PM.

[Buffdaddy]

Has a [k26], reinforced everything, PETG breech and LEDs. Decent for my first serious Longshot project. Getting 70' with slugs, still have some sealing issues to fix.

[Buffdaddy]

Double post, I know.



Taerkitty-style TTG, but with a clip on the front. Clip is permanently there; I have a front-loading hole and will install a tab for lowering the follower, a la Boltsniper. Rev. 2 will hopefully become the awesome sidearm I envision.

[taerKitty]

To clear up a question people seem to be asking, Buff gave me some credit because the TTG internals were done like I did in my 30-minute TTG Overhaul. Still, I think the integrated magazine is the most striking feature, and I would like the name to reflect it.

How about we call it the Bu-TTG?

===

I found it so striking I wanted to give it a go:

===

Edit: Here's the write-up

Edited by taerKitty, 12 October 2011 - 10:19 PM.

[taerKitty]

New day, new mod (Speaking of mods, should I have edited my last post? It's a different topic and different day.)

PowerStocked LS:

1/2" PVC-sized hole in the back of the LS

3/4" PVC

2 x TTG springs

Hot glue

Done!

[jumpingcat]

This is my awesomesauce NF. The green is hand paint.
mods done: ARR,coupler,minimization,ace 49 spring replacement,paint job.

[mrdarkmonkey96]

Im new, so I apologize if pictures are over or under sized, or dont show up at all. Heres my painted recon cs 6. krylon fusion red and black.,
Heres my raider cs-35. krylon fusion black, as a base coat, then krylon gold overcoat.
My dart tag pistol. Crossfire?? Same paint as the recon.
Some other nerf guns I don;t have pictures of are on my youtube channel, mrdarkmonkey96. Im currently working on a gold longstrike, and dart tag blaster., . Any of these nerf guns are avaliable for purchase. pm me about prices.

well, back from a months suspension. last time i leave my nerfhaven page up at a friends house. he thought he'd help me out by commenting on some pics on the pics only thread. Idiot. so, any comments, questions, or problems with my painting. Im trying to sell these but new members arent allowed in the trading section.. BALLS!!

Edited by mrdarkmonkey96, 21 November 2011 - 06:37 PM.

[cheyner]

Just finished my wife, Bookworm's Doomsayer, tentatively named "The Librarian".


His and Hers:


BAM! See you fuckers at Hell (those of you lucky enough that is).

[mrdarkmonkey96]

I have failed to post a new or original image of a nerf blaster that has been modified or painted. As that is a requirement for posting in this thread, I will not serve a 1 month suspension.

[taerKitty]

Singled Triple Shot (I got it this way) with a universal coupler (1/2 of a 1/2" CPVC coupler shoved in a 1/2" PVC coupler), with adult-sized stock, 6-way speedloader, stock dart barrel, [k25] inside, and 1/3" tube of epoxy-putty as reinforcement.

[roboman]

So, I got a large order of metal last night, and I decided to have a little fun before I started in on the remaining contracts.


Yes, it's a springer. Yes, I know I've said I hate springers. I don't anymore.


Virtually zero-deadspace aluminum coupler/bushing combo.


Male end of the coupler. It has a very good seal.

I haven't improved the stock seal yet, but I replaced the stock spring with an Ace #49. It shoots quite far for a NF.
Also, this NF is going to receive a CNC machined aluminum plunger rod/head. I might start selling kits soon, if there's enough interest.

Edited by roboman, 22 October 2011 - 06:01 PM.

[ilikefish58]

Portal Themed Raider
The flash on my camera makes it seem rather white, but its actually more of a creme color.




Yes, that is a companion cube keychain. I made it from a rubik's cube.







The next two are dark, but flash was screwing up the pics.

[popatachi]

Shorty, rear-loading Maverick... In an attempt to minimize as much of this blaster as possible and because it was for fun. This is still waiting for full shell work and paint.

Youtube Link

Edited by popatachi, 24 October 2011 - 12:35 AM.

[Kevintsk]

I hereby introduce to you, my Tornado2k.


Rear loading Took me a long while to get it right along with the seal.

Yet to link the trigger in this photo.

Has a big salvo tank inside and fired by the blaster button on the left side of the handle.

Pardon the blurry photos.

[landstricker]

Triple shot: has a 1/2'' pvc coupler, stock+PAS spring in it, but I'm going to put the "man" spring in it. And obviously a PJ.
BBBB: Minimized, 1/2'' pvc coupler.



Up close with the TS.



Big blast's money shot!

[tassie nerfer modicas]

Hi my name is Josh, I am a FNG so here is my first post.
This was done about 3 weeks ago, It is a tornado strike with homemade scope, and expanded BBUMB air tank enjoy

http://i48.servimg.c...04/dscf1410.jpg

http://i48.servimg.c...04/dscf1413.jpg

The reason I have not put the pics up, Is that they are too big, and I don't know how to resize them yet.

[lysdexia]

FNG here.

mav, coins in the spring, restrictors gone, clutch glued up, full barrel swing, reinforced cocking bar, and a paintjob



double shot (i'll do a full write up on this one with internal pics once i get a chance), sawn off, cut down stock, rear cocking, de-restricted shells, and de-restricted plunger ends. did a shit job of painting the barrel, will re-do it next time i have it apart. more to come on this one, want to pull the plunger apart and see what i can do with the springs, and lose the ejection springs in the barrel.



have a couple of other modded blasters, but nothing worth posting pics of in here

[spencerak]

These are the first blasters that I have built that are actually worth posting pictures of because they are my only good paintjobs then the recon and Long Shot that aren't painted.

Airtech 2000:





I bought another AT2K from Badger and will have interchangeable turrets for this 2k, 1 with crayolas for stock darts and 1 with PETG for stefans.

NightFinder with SSPB integration, PVC/CPVC breach:





Big Bad Bow with RSCB:





Ice style singled Long Shot with DTB integration:



Recon with AR removed, power stock and removeable barricade integration that can be put on a deploy, longshot and longstrick as well; barricade has a 9V battery all locks removed and a button switch:





Buzz Bee Big Blast coupled, minimized, has an LSFG handle instead of the regular one, and the pump handle was put on upside-down and I am far too lazy to fix it right now but when I do a 1/2" CPVC 1/2" PVC 1 1/4" PVC coupling sometime in the next few weeks it will be fixed:





The last picture is really crappy but it is where the LSFG handle's trigger is hot glued to the BBBB piece that sits around the firing pin. Also I think the LSFG handle is much more comfortable that the stock BBBB one.

Edit: re-sized Pictures. Also sorry for low picture quality, I am using my iPod as a camera.

Edited by spencerak, 29 October 2011 - 01:54 PM.

[meatballica]

Guess what that picture means....

[darknyght00]

Guess what that picture means....

Is it bacon?

Here it is. My take on Dyslexic's Project: SPARK.







It took a while to complete but it was well worth it. No official ranges but I'm very impressed with it so far.

Edited by darknyght00, 29 October 2011 - 07:52 PM.