Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3276 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 21 August 2010 - 11:01 PM

Ninja Turtle NF.
Posted Image
Posted Image
Best rail accessory ever.

Flower Power, my ladys 4B.
Posted Image
Posted Image
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#3277 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 22 August 2010 - 04:02 AM

QUADSHOT COMBO BREAKER!!!!

@ SonReeceSonJenson - Sadly I don't. I use some cycling glasses with replacable lenses so depending on my mood depends on which lenses I use. Most of the time I use the yellow lenses.

And to keep the thread on topic:
Posted Image
  • 0

#3278 princexbuster

princexbuster

    Member

  • Members
  • 176 posts

Posted 23 August 2010 - 02:10 PM

MINE IS BETTER and probably more used but still.
Posted Image
  • 0
Sexy Dwarves.

#3279 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 23 August 2010 - 05:01 PM

Woah, haven't posted here in a while.

Contract for Louie, Overhauled 1500.

Posted Image

New record times for 1500 turrets thanks to the new belt sander. The whole turret only took 20 minutes to do, minus time spent waiting for epoxy putty to dry.

Posted Image
  • 0

#3280 HasreadCoC

HasreadCoC

    Member

  • Members
  • 274 posts

Posted 23 August 2010 - 07:19 PM

Ok, my first ever post, I am praying that the images show up correctly.

My Twinsanity (double furyfire):

Posted Image

Posted Image

Orange on one side, green on the other. Super comfy handle is super comfy and primes both blasters at the same time, needless to say, this thing shoots fast. I hope to do a writeup at some point (well, I hoped to do I writeup 3 months ago, but never had time) but for now these pictures should show about all you need to know.

Final notes: No hot glue was used, and you can remove the metal bars from the outside in order to open up just one blaster at a time if you wish, as opposed to having to open both at once. This mod is dedicated to Dev Nerfan, Martin, Mike, Alastair, Alex, Jared, Adam, Noah, and all you other awesome facebook Nerf regulars, you guys keep me doing what I'm doing.

Edited by HasreadCoC, 23 August 2010 - 09:02 PM.

  • 0

I'm the only respectable person here. The rest of the NIC are pretty much just child molesters.


AKA: ObiWonTwo on Nerfrevolution, and most of the rest of the internet for that matter.....

#3281 nisaburo

nisaburo

    Member

  • Members
  • 400 posts

Posted 24 August 2010 - 10:20 PM

Tech Target rifle. Because nitefinders are dumb.
Posted Image

With Rev. 2 Slug Breech. Shoots ok.
Posted Image
  • 0

#3282 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 24 August 2010 - 10:39 PM

Finished Sharvil06's SM1500.
Posted Image
Posted Image

10" Pteg barrels.
Rear-loading.
Craft foam for the turret seal.
Brass for the dart slide.
Plugged pump.
Glued trigger spring.
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#3283 firepie

firepie

    Member

  • Members
  • 7 posts

Posted 25 August 2010 - 12:15 AM

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0
So it goes.

#3284 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 25 August 2010 - 01:53 AM

Posted Image


Homemade lever trigger, spring in the pump handle to single-hand wield, and homemade low-angle hopper.

Two foot CPVC barrel. The breech end is reamed out with a pair of kitchen shears so it's nice and inviting, then percussed into the PVC wye. The blaster already came with a PVC coupler, so the PVC wye is a perfect fit. A coupler is solvent-welded to the magazine branch of the wye. On the field, this will likely be fed by a SpeedHopper.
  • 0
Fugly is a feature.

#3285 jubjub517

jubjub517

    Member

  • Members
  • 174 posts

Posted 26 August 2010 - 11:02 PM

Wow, I sorta forgot about the post button in this thread.

Posted Image
Posted Image
Posted Image
5k + 4k + 1500 pump = SUPERTECH OVER 9000

The cam works, and the pump is unplugged and held on with hose clamps.

Posted Image
This is my other 4k. 3K tank on the left, 4k tank on the right. And yes, that's a fucking 1/2" dump valve. I may post a revision to Ryan's 4k overhaul, but don't count on that.

Posted Image
Sm5k + SS Sm5k + Sm2k + Hopper = Colorful, yet effective 5k.

oh look, a matching SS Sm500?

Posted Image
Posted Image
Sneakshots are awesome, but only awesome if it utilizes the original bolt.

This one is especially awesome because it has a 4 shot inline clip.

Posted Image
Semi auto Sm1k. Neat huh? Wanna see an internals pic?

Posted Image
Yes, those are the internals. Wanna know what I did to it?

I cut down the cam spring. The trick is to cut it down just enough so that it opens the tank, but the air is enough to force it valve closed. Wanna know how long the cam spring should be?

Posted Image
That long. If anyone wants a thread about this, feel free drop me a PM.

Posted Image
Uh oh, is that a SS2 tank with a new dump vale?

I'm also going to solvent weld a coupler over this, so don't warn me that the epoxy isn't strong enough.
  • 0
[18:17] <+Jugs> Hey beefy
[18:17] <+Nerfer> pls dont call me that
[18:18] * Nerfer is now known as Guest17574
[18:18] <+Lucian151> Woah its Beefy Theify
[18:19] <+Guest17574> STOP CALLING ME THAT IM NOT FAT
[18:19] <+Guest17574> pls

#3286 HasreadCoC

HasreadCoC

    Member

  • Members
  • 274 posts

Posted 27 August 2010 - 07:29 PM

I am posting this for a friend, I take NO credit whatsoever

So, my friend Nerfan (NH account here: http://nerfhaven.com...showuser=39056) came up with this:

Posted Image

A hoppered fully functioning turret: It works! Because this was done on a Quadshot, the turret auto-rotates, giving you a huge supply of ammo without having a 5ft long hopper (banned at most wars), plus, this is cooler :lol:

Close-up of the connection point:

Posted Image

Looking down the center of the barrels:

Posted Image

He has also posted this on NRev (where he is also known as Nerfan). Since he has not yet been validated here on NH (which is strange since he joined 5 months ago, I thought the wait was 2 months?) he asked me to post it for him.

EDIT: He has now been validated.

Let me once again stress that I take NO credit for this, I'm not stealing his idea/pics, I'm just posting for him

Edited by HasreadCoC, 28 August 2010 - 05:55 PM.

  • 0

I'm the only respectable person here. The rest of the NIC are pretty much just child molesters.


AKA: ObiWonTwo on Nerfrevolution, and most of the rest of the internet for that matter.....

#3287 KitAdrian

KitAdrian

    Member

  • Members
  • 39 posts

Posted 28 August 2010 - 03:16 PM

I figure I've been sitting on this beauty for long enough, I should share it with the world.

I used Dim3's measurements for Double/Triple Mavs to design sprockets for my own Tri-Cylinder:

Posted Image
Posted Image
Posted Image

Needs painting and a few other things... I've got plans for making it a Semi-Auto by merging it with a Magstrike and a hornet chamber... but that's still in the test phase. I'm not going to hack into such a pretty thing until I'm sure it will work.

Sprockets are made from 2 layers each of 1/8" Acrylic that has been laser-cut from a design I made in Illustrator.
  • 0

#3288 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 28 August 2010 - 04:14 PM

Hoppered Frankenfinder.

Posted Image

Minimized, draw-extensioned Tech Target.

Posted Image
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3289 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 29 August 2010 - 09:23 PM

AT4K!!!
Posted Image

Rear Loading!!
Posted Image

Will be getting paint and other body work eventually.
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#3290 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 30 August 2010 - 04:53 PM

Sick of your RFR breaking?
Posted Image
STICK A FUCKING BS TANK IN THAT MOTHERFUCKER!
Posted Image
Posted Image
Posted Image
Still working on some niggles, like air leaks and still need to fix the shell and the trigger. But once it works, damn will this be awesome.
  • 0

#3291 Darksircam

Darksircam

    Member

  • Members
  • 117 posts

Posted 31 August 2010 - 12:12 AM

Pew pew. Raider pistol.
Posted Image

BBB with inline clip, holds nine stefans. Or four streamlines. 40'-50', great for indoor games.
Posted Image
Darts will not spill everywhere.
Posted Image

Pistols. Simple couplered PS, Switchshot Wii spring on the NF. I've got a seven shot turret for the NF as well.
Posted Image

Aforementioned Switchshot with a Firefly spring. Firefly springs are strong.
Posted Image

Modded Max-D 2k. Needs a pump replacement.
Posted Image

Edited by Darksircam, 31 August 2010 - 12:27 AM.

  • 0
Travel Cost to TRU = $2. Eliminator pack = $15. Momentum testing = 2 lost darts. Outranging Recons with your mini pistol = priceless.

#3292 popatachi

popatachi

    Member

  • Members
  • 206 posts

Posted 01 September 2010 - 10:58 PM

Posted Image
12" PETG barrels/turret flow mod/valve flow mod/plugged pump (with dimple to account for the check valve)/plugged goo gauge
  • 0

#3293 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts

Posted 04 September 2010 - 11:37 AM

Oooo two posts in one day. What an improvement. So here are the first two of many godly NFs to be recreated since the fire (bonus points for zebra print duck tape):
Posted Image
Both are mine (I'm not sharing just yet with Whitemoonlight...hehe). I will be makin loads more soon. Oh, and btw, they shoot farther than your NF rifles. 110' easy...
Posted Image
A superbly surprising blaster I made post-fire, pre-apoc, that proved to be really good. I was shooting over peoples' heads all day...srsly, it shoots excessively far...110'+ (if you guys haven't guessed, that's where the woodline is on this property...can't really measure after that. It hits that far at chest level though.)
And for when I just wanna hurt people:
Posted Image
Ya...
  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#3294 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 04 September 2010 - 03:21 PM

Sylow Normalizer work, you know.

Posted Image

Posted Image

Really basic small stock. Just something easier to shoulder.

Shoots a million miles.
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3295 Lucian

Lucian

    Member

  • Members
  • 446 posts

Posted 04 September 2010 - 05:53 PM

New style Big Blast with internal coupler.

Posted Image
Posted Image

Polycarbonate spacer to keep everything from moving:
Posted Image

Perfect coupler:
Posted Image

All together now!
Posted Image

Insanity:
Posted Image
  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#3296 rosenstyle

rosenstyle

    Member

  • Members
  • 5 posts

Posted 04 September 2010 - 06:22 PM

This is my first post here on NerfHaven so I figured this would be a good way to start.
my AT3k
Posted Image
I replaced the pump, made it rear loading, gave it 12 inch PETG barrels, and obviously painted it.
I bought this one fairly heavily used, it worked fine, but it had multiple scuffs in the paint and it looked terrible.
So I painted over the scuffs and put some Effeminate electrical tape on it.

I know the picture is a bit large, if someone would PM me describing how to shrink it down a bit (or send me a link to a topic that shows how) that would be sweet! I can't seem to figure it out.
  • 0
"When life hands you a Jeffree, stroke the furry wall."

#3297 CobraNerf

CobraNerf

    Member

  • Members
  • 1 posts

Posted 05 September 2010 - 01:48 AM

Posted Image
Modifications:
-16mm Conduit Coupler
-4" 16mm Conduit speedloader
-Minimization
-C-836 Spring replacement
-Catch Spring replacement
-2x O-rings
-Paintjob
Ranges are from around 60-75 feet. I like it alot.
  • 0
Playing COD is not training for Nerf.

#3298 TxNerfer

TxNerfer

    Member

  • Members
  • 126 posts

Posted 05 September 2010 - 01:04 PM

I thought I might as well show off a few guns:

My triple couplered 4b. I adapted taerkitty's return spring idea for the pump but instead, I used a longshot spring. It gives it a better feel in general.


Posted Image

PAS

Posted Image

Couplered quadshot with pvc/cpvc breech. I did Zorn's mods and slapped a coupler on. With a hopper, hits 95' over a tape...with slugs

Posted Image

Closeup of the breech:

Posted Image

Lastly, my 3k with PETG ammo holders on the stock

Posted Image

Edited by TxNerfer, 05 September 2010 - 01:18 PM.

  • 0

1. Thank you, I take donations in horse/wolf porn


#3299 louiec3

louiec3

    Member

  • Members
  • 316 posts

Posted 06 September 2010 - 09:29 AM

I got my stampede yesterday at the toys r us in Racine, and I wasted little time in popping out the a/rs. This gun is awesome it's like an automatic longshot with a less sucky handle, and for those who are wondering the plungertube is the same diameter as a nightfinder's.

Naturally this is part one part two is making a rechargable battery pack.

It shoots far enough for stock ammo wars, and speaking of which if you live in Milwaukee and somehow haven't hear of it here is my war.

Posted Image

Edited by louiec3, 06 September 2010 - 09:33 AM.

  • 0

#3300 Lucian

Lucian

    Member

  • Members
  • 446 posts

Posted 06 September 2010 - 08:37 PM

When Classy meets Classic.
Posted Image

A big thanks to Blue and Atomatron for the guns.
  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users