Modification and Paintjob Pictures
#2776
Posted 11 January 2010 - 05:59 PM
Write-up to come
#2777
Posted 11 January 2010 - 06:26 PM
The Sylow Conjugator
Bike pump. Same pressure as old pump, but in 1/3 as many pumps.
Shotgun attachment. 1/2" PVC stub in a 1-1/2" to 1/2" PVC slip bushing in a cut down 1-1/2" PVC coupler. Fits into any 1/2" coupler to adapt it to 1.5" PVC shells. 4" shells with 4 CPVC barrels.
Here's a spacer template:
I'm sure I could fit in 6 or 7 PETG barrels, but PETG doesn't fit my darts and brass is expensive. 4 is plenty anyways.
Super internals. 3/4" to 1/2" PVC slip bushing solvent-welded to tank. Epoxy putty on the shell around the bushing for more support and to take stress. External tubing in case I ever add a hard tank (also for the external OPRV). Tubing is put into both the bike pump and tank through superglue + solvent weld + goop (let set/cure at each stage).
1/8" PVC sheet + ABS/PVC cement + epoxy putty = invincible trigger.
Firing video:
http://www.youtube.c...a/0/WrFZiEcrcC0
Kruger and Dunning (1999)
#2778
Posted 12 January 2010 - 04:08 PM
Breech-Loading RSCB Clip:
-
RSCB Big Blast
Same Style RSCB:
Both of these guns can shoot straight through my ERTL RFS Box at 60 feet away, and get ranges of 105+ on the first shot, with about a 7 foot range drop to the last shot, due to the deadspace.
Doomsayer:
-
Edited by HOTH, 12 January 2010 - 04:15 PM.
Solved the Rubik's Cube in 46 seconds
"Nobody understands quantum mechanics" - Richard Feynman
#2779
Posted 13 January 2010 - 12:21 AM
TOO POWERFUL !
#2780
Posted 13 January 2010 - 07:22 AM
Vulcan Chain modification
Integrated PVC/Brass breach
Enjoy!
#2781
Posted 13 January 2010 - 09:14 AM
Contract brass breeched raider. Breech is about 1/8" short of accepting stock length darts.
Ranges? Who knows. I just did the breech; client was responsible for actual internal mods.
Edited by Zorn's Lemma, 13 January 2010 - 06:49 PM.
Kruger and Dunning (1999)
#2782
Posted 13 January 2010 - 08:53 PM
-
-
Perfectly Fabricated Doomsayer Spacer Template. More on this later
Airtech 2000, Awaiting some Mcnumbers Spacers:
-
Angel Breech:
-
More to come.
Edited by HOTH, 13 January 2010 - 08:58 PM.
Solved the Rubik's Cube in 46 seconds
"Nobody understands quantum mechanics" - Richard Feynman
#2783
Posted 13 January 2010 - 11:09 PM
Better than a AT2K. End of story.
yeah I'm that guy who made that cool thing with the cool paint.
#2785
Posted 14 January 2010 - 08:52 PM
# 1
-
-
# 2
-
#2786
Posted 14 January 2010 - 10:07 PM
#2787
Posted 14 January 2010 - 10:52 PM
Great work Ry and Zorn's.......
If these become popular, I see them as being the next widely banned item in the NIC---They are that good! 100', and 35 shots without reloading? The feed is actually very smooth---I emptied the drum several times without an issue. It's almost odd letting 35 continuous shots off without reloading......odd and awesome!
The Meanie just got a bit meaner.....
It's been kinda a strange tradition of mine for the past 3 wars---I sit and add some new Hand-paint details pre-war......makes the blaster a little more special to me----I know, weird huh?
Rknight-- wow......N9---your dad is in trouble now!
#2788
Posted 15 January 2010 - 04:55 AM
Great work Ry and Zorn's.......
If these become popular, I see them as being the next widely banned item in the NIC---They are that good! 100', and 35 shots without reloading? The feed is actually very smooth---I emptied the drum several times without an issue. It's almost odd letting 35 continuous shots off without reloading......odd and awesome!
Kruger and Dunning (1999)
#2789
Posted 16 January 2010 - 06:11 PM
Contract for Merzlin
Kane de-modding his Big Blast
Oh yeah acrylic
Raider drums!
Added polyethylene to eliminate darts falling into the drum
Yay, done at 4:30 AM
Polyester does not take heat
Contract WIP
#2790
Posted 16 January 2010 - 06:39 PM
#2791
Posted 17 January 2010 - 05:02 AM
SS Shot Blast with rscb setup with rear loading. Titan pump, 3k air tank and 2k trigger. Single pump between shots for rapid fire or 2 pumps between shots for distance. Holds 5 streamlines or 10 stefans.
Edited by jerm78, 17 January 2010 - 05:02 AM.
#2792
Posted 17 January 2010 - 11:20 PM
15 pumps = 70' range with mega stefans. The air tank in this thing is similar in size to an SM5K tank. When I install the modified internals (and get an airtight seal on the barrel) I'm willing to bet I can hit 90'. These ranges are with a simple AR removed tank. The donor has the air outlet enlarged to 3/8" (almost twice the diameter as stock) and hopefully installing a check valve at the head of the pump (instead of in the tank) will allow me to get higher pressure with fewer pumps. Dead space in a pump is bad news. We'll see tomorrow.
It fits in your pocket no problem. The front profile is smaller than a Nitefinder without ammo holders.
It's a snap to use. Stick a dart in the barrel while the gun is in the folded position. Pump up the gun (the pump stroke is like 2 inches, 15 pumps takes 3 seconds, tops). Stuff in pocket. When the situation arises, pull the gun out while simultaneously hitting the secret barrel release. Gravity and the torsion spring snap the barrel into position. Take the shot, and flick your wrist as soon as you pull the trigger. This flips the barrel upwards for an extremely quick reload. Pump up, rinse, repeat.
The gun is so damn accurate, I can hit a beer can from 30 feet over half the time. I can hit a man sized target from 50' easily, but of course you need to lead your shots if they are moving.
Expect a full write-up and video. There are many other aspects of the gun I have improved upon, but are not present in the prototype. If my air tank and pump schemes work out, this might be the furthest shooting mega dart blaster ever.
Thanks again for the gun, Blacksunshine. It feels good to have my childhood favorite back in the collection.
Edited by bourbon, 17 January 2010 - 11:22 PM.
#2794
Posted 18 January 2010 - 09:45 AM
for now...
Hehehehe.
And the Pull action shotgun.
It's what I call finished, which means it works in a war, but I'm still missing a stock, some paint, and some strength so I can put a LS spring in it without taking me 1 minute to prime.
With a 7" CPVC barrel "nested" into 1/2" thinwall PVC
Back
Front
has the word "beer" in it?
FURYfire, not Fluryfire.
#2795
Posted 18 January 2010 - 07:33 PM
When stock, the plunger doesn't even reach the end of the plunger tube. These cpvc bushings that I use were
the perfect length to just cut the plunger tube down and then goop onto the end. Then I added some mighty putty
reinforcement to keep the plunger tube from moving. Everything is still removable if I want to go back and make
improvements later, since the plunger and spring are still stock.
The barrel on there now is just 2.5 or 3 inches, I think it needs a longer one because ranges are all over the place.
The stock dart went about 35-45 feet, while stefans ranged from 35 to 60 feet.
I'm pretty happy with it, I'll be putting a SSPB in that empty space at the bottom eventually.
Edited by VelveetaAvenger, 18 January 2010 - 10:54 PM.
#2796
Posted 18 January 2010 - 08:45 PM
Here are 3:
Some of My Nerf Modifications
JetForce Pistol Demonstration
Nerf Splitfire Demonstration
I have been meaning to post this for about 3 months now...
It's a 3k tank glued to a piece of PVC which covers a DTG turret and the tank has a foam seal. Also, the turret would be rear loading, except I don't have any more PETG.
Also, my BBBB:
#2799
Posted 19 January 2010 - 11:50 PM
No AR's, swapped the spring for a RFSG spring, in process of rebuilding the stock, PETG barrel (is now VERY accurate, even with stock darts), removed some locks, modded a raider drum to fit in bacquards for it. It pushes 50' without a problem, I like it. Paint job coming soon.....
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users