5162 replies to this topic

[darkstar42]

This Is my unfinished long-shot carbine. It has no bolt-sled, modded to ice's no bolt-sled mod. I am going to have more pics when i find my camera cable.

[trogdor65]

I thought I posted these awhile ago, but turns out I didn't.

I got both of these from my friend, gave 'em both crayola barrels, touch up paint job and sent 'em back. I wouldn't have used crayolas but my friend uses stock darts, and crayolas fit stock darts pretty well.

[Icespartan 1114]

My modded Nerf Longshot

Mods Done where: Ar removal, Added extrememly stretched Nite Finder spring, Removed bolt lock, Removed trigger lock, Electrical tape on the handel, Front Gun intergration, Removed rail, and a paint job

EDIT: Ice did the mods

Edited by Icespartan_1114, 28 August 2008 - 01:32 PM.

[VACC]

Ice and Icecockjockey, shut up. Oh fuck it, I'll do it for you.

[darkstar42]

That is my painted vulcan. And so you can see the barrel.



It is very shiny. YAY

[Soothsayer]

My Frankenmaxxx 1000

Edited by Soothsayer, 28 August 2008 - 10:06 PM.

[bobafan]

I have been working on this and a few other guns in preparation for the Cincinnati war.



Primed with old plunger tube.


Scale


internals


It is a Defender T3 with a Lightnin' Blitz epoxied on it. I would have done the whole integration, but I couldn't figure out a trigger since the valve needs to be pushed. The T3 had a tiny plunger tube, much shorter than the plunger could handle, so I made a new plunger tube out of 7/8" pvc pipe. The new plunger tube is 6 1/2" long, giving the gun tremendous power even with the fairly weak springs on it. On the ond of the plunger tube, I have a coupler, so ROF is very good.

The ranges for the T3 average 119' banded and 97' not banded.

On the lighnin' blitz, I put on petg barrels, as you can see and plugged the pump.
At 20 pumps, here are the ranges.
35' 53' 54' 64' 65'

I didn't think I would finish this today, but here it is.

speedloader splitfire




I've never seen this done before. I don't know why.
The actual speedloader is pieces of pvc epoxied to a piece of choroplast.

Edited by bobafan, 29 August 2008 - 02:39 PM.

[Mxer4life369]

This is my new primary, my LSB. I got this gun at Gordman's for like $7. I love it. The rockets that come with it go all the way across my basement, and it's still going up when it hits. I also added an at2k handle to the front and made it a "hair trigger" by putting a layer of lexan on the trigger.

This is my gun in all it's glory.

with the cpvc barrel attached

without the barrel (for the rockets)

This is where I attached the AT2K handle. This increases stability when aiming incredibly. I will do this to every LSB I get.

And this is the gun with a rocket on the barrel.

I havent even gotten to shoot any micro's because my walmart must have quit carrying streamlines cuz I can't find any.

Edited by Mxer4life369, 29 August 2008 - 10:23 PM.

[Axelion burnout]

Just finished painting my primary Supermaxx 1500! I thought it turned out quite well, but it still needs some touch ups.

[bobafan]

I'm still working on stuff for the cinci war, this is the newest version of my 6 shot NF.



The turret is hexagonal, opposed to the previous ones which were round.

[Natbeanz]

Before:


After:



Need to touch it up a bit

Do it later

[Aimless]

Awesome paintjob Axelion, thats the color scheme Larami should have used on it!

Well my day is ruined thanks to my parents having a shit fit over some plastic toys.

Here are the breeches I was supposed to deliver today.

Due the inconsistent ID of the PVC, I had to custom fit each barrel to a specific breech, hence the 2 dots on Badger's breech.

Edited by Aimless, 31 August 2008 - 08:01 AM.

[nerfer34]

Edited by nerfer34, 31 August 2008 - 01:13 PM.

[soccerdog813]

This is my SM1500. Finished it yesterday.

And my LBB.

[oodalumps]

I came across a Long Shot at a garage sale for 1$. I already had an angel breached LS so I singled this one. It has a CPVC breach with a 12" 17/32 brass barrel. I slapped a +bow spring into it. I also integrated a Lightning Blitz (Why would you ever integrate the front gun? Shit sucks). Ranges for the LS are unbelievable, well over 100' (more accurate range test tomorrow). And the Blitz gets around 70' with a nice spread.

I need to vacuum.

[Z4]

The LS2k


It clips onto a regular Nstrike rail (if you don't forget to put the clip in when you reassemble it!)

Axelion and soccerdog- Those 1500s are amazing. I like them both.

Edited by .Z4., 01 September 2008 - 02:56 PM.

[b00m13]

I wasn't very happy with the first BBB mod on this thread: This one

So after I made the 2nd BBB (that hit over 120' on a flat shot with no wind)
I got to working on re-customizing the previous BBB.

It's based off of the very first BBB mod I've ever done, except with a couple of minor changes.
For one, I didn't cut off the forward handle, and the clips were modified as well (spring loaded, magnets, etc)



I think I'll name this one Purple Haze ^^



and yes, I do enjoy my rice krispies treats.

[bogboogalars]

My newest paint job: Just a standard nf mod, spring replacement, with a cpvc coupler and a speed loader
I started off with a white base coat, then orange and then the white and orange stripes.
Baghead inspired of course.

Edited by bogboogalars, 02 September 2008 - 09:27 PM.

[nerfer75]

My minimized Big Blast.


Random Question For War-Hosters: Would You Allow A Big Blast That Shoots Megas In A War?

Edited by nerfer75, 02 September 2008 - 07:23 PM.

[CaptainSlug]

My Spiderman 3 Dart Blaster modification is finally done. Took me a while to get the barrel and ramrod added.

Edited by CaptainSlug, 02 September 2008 - 07:56 PM.

[analogkid]

My heavily modded AT3K:




I think she might be my new favorite.

Edited by analogkid, 02 September 2008 - 08:50 PM.

[nat]

Cpvc'ed tek 10.

lotr crossbow elastic replaced.

Ertl shotgun with detachable ball shooter.

[bobafan]

Yet another mod.
Speeloader-ish sm1500


Because I hate ramrods.

[1000 Zombies]

My most favorite paintjob of all my noobish paintjobs.

[Icespartan 1114]

My first Lock n' Load. Bought it from Ice, Modded by Omc

Edited by Icespartan_1114, 03 September 2008 - 04:52 PM.