5162 replies to this topic

[I KiNG DrAGoN I]

A pic of my Maverick (with the turret mod included)



Pics of my Recon CS-6 (i also removed air restrictor)

[psychoswan]

Ok here is my latest integration. A SMDTG into the front bottom of the longshot.

I know hotglue is a no no but I wanted it to be slightly removable, as in I didn’t want to have to cut the gun apart to get it apart.

It actually looks rather better now, cause I’ve filled in a lot of the dead space between them.

Here is a front view.

Close up side view.


Here is how my hand fits. Its actually quite comfy and it works really well.

[thaygor]

Here is my nf with a at3k intogration

And A new pic of the zax bow

[nat]

My Cpvc'ed Tek 10

[Shanks McLoin]

My new Big Bad Bow, CPVC barrel:

It's really not a bright green, the sunlight makes it that way:

The yellow zip-ties are for a strap. Photobucket is really pissing me off. None of the pictures I resized/edited will show the changes, and I saved them over the originals.

[Poseidon]

My Double Nitefinder:



I hate Photobucket and its out of focusness.

[NerfCrazy]

The lucky one.

[Galaxy613]

The 'Real' Longshot.

[Kid Flash]

Do you plan on finishing that?

[NerfCrazy]

My titan tank put inside a just toys bazooka shell(I don't know the actual name of the gun but it says just toys inc.) 1.25" pvc that the titan
rocket fits over and some foam inside of it to stabilize the cpvc barrel. A cpvc coupler wrapped in foam is shoved down the titan barrel and is
hot glued at the bottom. I just found out that this was a rare gun but unfortunately it was broken beyond repair I had tried to fix it but when
you pumped it it wouldn't hold any
pressure.

Edited by NerfCrazy, 09 July 2008 - 10:36 PM.

[Shadow 92]

Semi-auto Magstrike. In theory, it should have all of the accuracy and distance of a Longshot with the ROF of a Magstrike. In reality, I overestimated the size of the bladder and desgined a bolt that requires more air and pressure than the bladder provides. I'm also trying to fix a couple leaks.

EDIT: The Magstrike isn't fully fuctional right now. I just put there to show where it would be once I get the bolt to start working. Later on I think I'll cut off the lip and slide it in from a hole in the right side of the MS. The bolt should also be a lot shorter, just long enough to reach the front of the clip.





Also still in works. I'm almost finished. I just have to make enough room for the trigger and smooth out the rotation system, and attach the pump.

Edited by Shadow 92, 10 July 2008 - 03:19 PM.

[NerfCrazy]

My off brand ttg. This fun little thing can fit in your pocket. The dart you see is a cut down stock dart, thought I should clear that up.
Don't mind the tripod leg.

[CruxZader]

This is my newest longshot built for armageddon for that reason only.

[nerfer34]

Work in Progress...and thats just an integration into another gun........

Edited by nerfer34, 10 July 2008 - 06:41 PM.

[Kid Flash]

Well I took on a challenge and think I did quite well...Except for the majorly crooked barrel. Its angled around 20-30 degrees. Also if anyone else does this and for some reason doesn't want the right button Id pay 50 cents for it shipped in an envelope... Expect a write up later today or tomorrow.





EDIT: I need to clean my room...

Edited by Kid Flash, 10 July 2008 - 07:13 PM.

[Knud-Hansen]

heres my baby

This is OberonFox's mod but I repeated it and added a couple little things here and there:

photo bucket

Edited by Knud-Hansen, 10 July 2008 - 07:20 PM.

[oodalumps]

After MANY failed mods (thus why it looks like Swiss cheese), here is my SM1k currently. I drilled the pegs out of the turret, replaced all the air components with at2k parts, increased the volume of the at2k tank, and petg'd it. At first the turret was brassed with 9/16, but I switched to petg because it fits my darts better and the turret is easier to rotate. I also put petg into the front barrel; I flared one end of the petg out by holding over a candle and pressing it onto a funnel.

SM1K and my new Grimlock Transformer


Here is the turret when it was brassed.

Edited by oodalumps, 15 July 2008 - 05:59 PM.

[keef]

Well, my war LS isn't done yet. I don't think it ever will.



As you can see I did the frontgun integration. It gets 7 feet max, and used to get 20ish. Notice how it isn't completely glued. I wanted to try it first. Good thing I did. The linked trigger worked well, and it felt good, but the gun sucked.



So now I think I'm gonna add rails to the bottom and make it reattachable like kalentar13's 2nd LS integration idea.

PM me for your opinion.

Also, I have a nice video of the joined trigger. I find it pretty cool. Hasbro should of made the LS with the frontgun inside there. I think that would be a great marketing point. 2 guns in one.

http://s10.photobuck...nt=100_2187.flv

[I KiNG DrAGoN I]

Heres my longshot, my pride and joy (*sniffles*) they grow so fast!

[Banshee]

These are a few of my latest mods.

This is my minimized Crossfire. Its really small and really quiet. It has a sharp looking chrome barrel cover on it as well.


This is my VERY powerful NF that also has a chrome barrel cover and has metal tape on the plunger.


This is my Black Beauty... Its the sexiest RF20 I've seen to date (not including Eyes of Fire...Thats like an Uber Fire 40) It has Crayola barrels and a banded bladder. It's nice!

[Mr Tubb]

Here are some of the paint jobs I have done...



>Big Bad Bow: Burgundy, Silver, and Black. Done entirely by brush aside from the silver base coat.





>Nite Finder: Spray painted black and silver.





>PVC blowgun, with handle and attachable/detachable monopod/shoulder stock. Spray painted brass. I used a water bottle for the stock (I was surprised how much cooler it looked when painted.)



If the pictures are too large, please let me know and I will resize them. By the way, this is my first post on the Haven. I'm just glad I didn't have to wait the whole summer for validation .

[Galaxy613]

My latest abomination...



Super Salvo Maxx 1.5k

Edited by Galaxy613, 24 July 2008 - 03:20 PM.

[VisionCloud]

[joeyaglr444]

One word...Sexy...
The Long Shot Sexy, I hope you share the beautiful wire work involved in making such a masterpiece
Bravo Bravo.