Jump to content


Photo

Micro Hornet!

By: Renegade

11 replies to this topic

#1 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 24 September 2005 - 09:44 PM

Step 1 Unscrew the casing. For a picture of where the screws are, go to Ompa's Hornet Mod
Posted Image

Step 2 Cut 2 sections inside the handle, as shown.
Posted Image

Step 3 Cut the case on both sides, as shown.
Posted Image

Step4 Cut down on the handle ridges, like shown.
Posted Image

Step5 Cut the bottom of the gun, with a little notch like shown.
Posted Image

Step6 Cut more off the case.
Posted Image

Step7 Place the internal's as shown.
Posted Image

Step8 Put it back together and it should look like this:
Posted Image

Step9 Glue the pump onto either side, depending on if you're right or left handed, and it should look like this. I inserted an at2k pump since it doesn't stick out as far as the Hornet pump. And there you have it, the finished product.

Posted Image
Posted Image

For details on a barrel mod to increase range, go to Ompa's Hornet Mod
  • 0

#2 LordoftheRing434

LordoftheRing434

    Member

  • Members
  • 565 posts

Posted 24 September 2005 - 10:13 PM

Smooth mod Renegade. My only problem is the pump. To me, it would seem a bit awkward to pump. But, of course, it's the kind of gun that when you resize it, the pump would be a little different anyways. Either way, nice write-up!

~Rings
  • 0
And when he gets to Heaven, to St. Peter he will tell, "One more soldier reporting sir, I've served my time in hell."

"I bluff it. I don't throw my weight around and say I know what I'm doing." ~ Mick Jagger

#3 NerfLad78

NerfLad78

    Member

  • Members
  • 263 posts

Posted 24 September 2005 - 10:40 PM

Wow congratulations to one of the few people with enough balls to open their Hornet... AND ACTUALLY DO SOMETHING!!! Good job.
  • 0

#4 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 25 September 2005 - 04:01 PM

Here's some more pictures from other sides/angles.

Posted Image

Posted Image

Posted Image

Posted Image

You could keep the pump in front, with some dremeling and if you shortened some tubing. With that it'd look better than mine. :o
  • 0

#5 rylundo

rylundo

    Member

  • Members
  • 78 posts

Posted 25 September 2005 - 04:13 PM

I don't have a hornet so i dont know and was wondering what the piece sticking out of the bottom of the handle is.
  • 0
I am hungry enough to eat a cow.....no not really just a full sized baby.

quote from chessler
Rylundo, you get the cookie anyway.

Thats right bitchs I got a cookie.

#6 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 25 September 2005 - 04:23 PM

That's where the Titan would feed air into the Hornet.
  • 0

#7 rylundo

rylundo

    Member

  • Members
  • 78 posts

Posted 25 September 2005 - 04:25 PM

Oh. thanks Renegade.
  • 0
I am hungry enough to eat a cow.....no not really just a full sized baby.

quote from chessler
Rylundo, you get the cookie anyway.

Thats right bitchs I got a cookie.

#8 SG Pilot

SG Pilot

    Member

  • Members
  • 281 posts

Posted 25 September 2005 - 08:11 PM

Impressive, Renegade. Although I probably wouldn't do that myself with my hornets, I must admit that thats pretty cool. Just remember not to plug the overpressure release valve on it because it'll break the trigger mechanism thing or what not.
  • 0
QUOTE(VACC @ Oct 9 2009, 04:45 AM) View Post

I know, I HATE toy guns that are made for little kids!


#9 PissBacon

PissBacon

    Member

  • Members
  • 189 posts

Posted 26 September 2005 - 12:28 AM

Couldn't the pump have stayed in the same area of the gun (below the handle, in the case) with a little trimming?

EDIT: I don't have a hornet myself to do this (or I would have already), but it seems very possible.

Edited by PissBacon, 26 September 2005 - 12:29 AM.

  • 0

#10 Chessler

Chessler

    Member

  • Members
  • 337 posts

Posted 26 September 2005 - 05:36 AM

Couldn't the pump have stayed in the same area of the gun (below the handle, in the case) with a little trimming?

You could keep the pump in front, with some dremeling and if you shortened some tubing.


  • 0

#11 opiumpanda

opiumpanda

    Member

  • Members
  • 79 posts

Posted 26 September 2005 - 06:46 PM

Although that looks really nice I think you should have made the pump come out the front of the gun and keep it in the case as much as you can. Keep up the cool mods though.
  • 0
"i read that nerfs coming out with a 500 watt lazer light that can burn through walls."
Hell you're lucky if you don't get fucked with a spiked bat

#12 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 26 September 2005 - 06:53 PM

Yeah, I think I may try that with this one. The air's having a little trouble getting to the air tanks. But I'd have to cut some of the tubing, and not sure if I could get it airtight again, but I might just do it. I'll post pics if I do though.
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users