At2k Shotgun
#1
Posted 11 June 2005 - 11:40 PM
I added six pieces of brass on the left side of the gun for ammo holders and I also put on a led light that is surrounded by sch80 on the right side (also used on my NFM4). I also added a clip from a keychain on the metal release bar on the back of the pump. Let's have a look...
View from above:
View of the front:
View of me holding the gun:
I loaded up the gun with three darts at a time. The darts measure out to an inch and a half. With three pumps, I acheived the following results:
Shortest of the three darts: 51.75 feet
Middle of the three darts: 56.26 feet
Furthest of the three darts: 61.33 feet
-One dart fired (shoved down the barrel with a ramrod): 83.38 feet
All of these shots were fired with no more than a ten degree angle. The shotgun tests with three darts did not require a ramrod.
#2
Posted 11 June 2005 - 11:45 PM
#3
Posted 11 June 2005 - 11:49 PM
Although I'm not familiar with the at2k, is there a way to keep the handle/trigger assembly, rather than tossing it aside?
But that thing must be pretty powerful to be able to launch three darts that far...
#4
Posted 11 June 2005 - 11:51 PM
Edit: Kirby, I doubt you could keep the trigger and still keep the gun that compact and small, as it would require a case to hold the trigger assembly, otherwise it would fall off. Once again, nice job.
Edited by NerfMonkey, 11 June 2005 - 11:53 PM.
#5
Posted 12 June 2005 - 12:02 AM
Get out more, or look harder.That is by far the most unusual and original mod on a 2k I've ever seen. I love it.
On a side note: Snake, good job; never let a good gun rot away. Have fun, I've always loved shotguning at2ks.
Edited by MysticNinja, 12 June 2005 - 12:06 AM.
#6
Posted 12 June 2005 - 12:20 AM
And yes, I've seen some pretty crazy shtie that people have done with their at2k's, like THIRTS' semi auto gun that is like woah. I just figured that if everyone else is coming up with so many ways to use an at2k, I might as well give it a shot.
#7
Posted 12 June 2005 - 10:04 AM
In other words make it look more like this:
#8
Posted 12 June 2005 - 12:29 PM
Oh by the way, when I relocated the plastic tubing that goes into the airtank, I only used hotglue, knowing that there was a good chance of it coming off and leaving me with a leak, which just happened. Would that GOOP stuff be the right choice for this type of sealing?
#9
Posted 12 June 2005 - 03:13 PM
#10
Posted 13 June 2005 - 04:11 PM
For that matter, need to make a nerf gun for a math project, yea you heard me, MATH. I am using the AT2K since I have three but I am tearing it up to make it look a lot like yours, except with a handle to have like a one hand hold and a handle like Pinney did on the pump. Very short time span to do this so I was wondering what would be a good replacement for the air tank tubing wise, and what size should I be looking for and where can I get it? I'm assuming its vinyl tubing but I don't know where to look for it or what size I need?
Also, for the barrel, I'll probably be using either CPVC or Copper. Would 12" be too much for those? my CPVC is on my quad AT2K and the bullets go in fairly tight and I have 6" on that, copper is very loose (slide down the barrel loose) so I don't know if I should use it. If so, what would be a good length for copper?
Edited by kickass_jb, 13 June 2005 - 04:16 PM.
RF20, Rototrack, 3x AT3K, 4x AT2K,Big Salvo,SS1,SSII,
2x SSPB,SM 1500,Rangshot,2x EaB,2x Mav,2x NF,
eagle eye,2x BBB,2x SM3000, 2x Tek 6, PC
#11
Posted 13 June 2005 - 05:31 PM
Nice hair by the way
Edited by moosenukem, 13 June 2005 - 05:32 PM.
#12
Posted 13 June 2005 - 07:41 PM
-Also, I only used twelve inches of brass to be able to fit multiple darts. I would definitely go with like six inches on an at2k if you are just firing single shots.
#13
Posted 13 June 2005 - 09:18 PM
Why dont you have anything to drink!?
Choose one, making you better feeling!
#14
Posted 13 June 2005 - 09:22 PM
#15
Posted 13 June 2005 - 09:25 PM
Why dont you have anything to drink!?
Choose one, making you better feeling!
#16
Posted 14 June 2005 - 06:07 AM
QUOTE ("Devious") |
2. Laugh like a maniac as you pummel them with your balls. |
#17
Posted 15 June 2005 - 06:58 PM
RF20, Rototrack, 3x AT3K, 4x AT2K,Big Salvo,SS1,SSII,
2x SSPB,SM 1500,Rangshot,2x EaB,2x Mav,2x NF,
eagle eye,2x BBB,2x SM3000, 2x Tek 6, PC
#18
Posted 15 June 2005 - 07:35 PM
#19
Posted 15 June 2005 - 08:38 PM
Great job!
#20
Posted 15 June 2005 - 09:12 PM
QUOTE (Talio) |
Catagory 5 hurricanes are the mighty dick of God. You don't mess with that! You don't mess with Gods dick! |
#21
Posted 15 June 2005 - 09:31 PM
Props to both of you, CustomSnake202 and kickass_jb, for your creativity. Not just talk, all results.
Ugh. Time to get back to work on my F.A.R.; I've been slacking.
-Piney-
<!--quoteo(post=209846:date=Feb 5 2009, 06:27 PM:name=boom)--><div class='quotetop'>QUOTE(boom @ Feb 5 2009, 06:27 PM) </div><div class='quotemain'><!--quotec-->
It's to bad you live in hawaii I bet there are not many wars there.Wait what am I saying<b> you live in hawaii you lucky bastard.</b>
<!--QuoteEnd--></div><!--QuoteEEnd-->
#22
Posted 16 June 2005 - 02:51 PM
128'
109'
124'
mean = 118'
My gun even with the goop still gives a minor air leak that I'm going to fix shortly but thats with those ranges. I already have two friends offering me 40$ a piece. Getting to friends into it plus and getting some $$ at the same time. Talk about a good day.
RF20, Rototrack, 3x AT3K, 4x AT2K,Big Salvo,SS1,SSII,
2x SSPB,SM 1500,Rangshot,2x EaB,2x Mav,2x NF,
eagle eye,2x BBB,2x SM3000, 2x Tek 6, PC
#23
Posted 16 June 2005 - 02:59 PM
Unless you extended the airtank I assume that's an angled range.mean = 118'
#24
Posted 16 June 2005 - 03:19 PM
EDIT: It's flat ranges
Edited by kickass_jb, 16 June 2005 - 03:52 PM.
RF20, Rototrack, 3x AT3K, 4x AT2K,Big Salvo,SS1,SSII,
2x SSPB,SM 1500,Rangshot,2x EaB,2x Mav,2x NF,
eagle eye,2x BBB,2x SM3000, 2x Tek 6, PC
#25
Posted 16 June 2005 - 04:42 PM
I replaced the airtank with vinyl tubing, it's a little longer and looks a little wider.
EDIT: It's flat ranges
I don’t think your key board seems to be working properly.128'
109'
124'
mean = 118'
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users