Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#901 hoongfu

hoongfu

    Member

  • Members
  • 475 posts
  • Location:West Lafayette
  • State:Indiana
  • Country:United States

Posted 09 July 2012 - 12:48 PM

DCIT variant made by ChaosPropel for me using an ERTL catch. I still need to add a barrel and RSCB clip and toss in a longer spring, but it catches great and the seal is optimal. Koree is holding it in this picture.

Posted Image

Edited by hoongfu, 09 July 2012 - 12:55 PM.

  • 0

#902 Collective

Collective

    Member

  • Members
  • 103 posts
  • Location:The Beltway

Posted 11 July 2012 - 07:43 PM

I made this a few months ago, but never got around to putting up a picture:

Posted Image

Posted Image

It uses a cpvc plunger rod with a pvc ring catch. Since it doesn't use a rainbow catch, it's not a rainbow-pump. I don't really know what you'd call it. A ring-pump?

Anyway, I just finished this today:

Posted Image

I wanted to make something a little less, shall we say, diddle-y? Something that didn't shoot as far as my other home made. So, I used some left over petg tubing from when I overhauled my Defender (McMaster #9245K41) and nested it inside of 1 1/4" pvc. The front bushing is a 3/4" to 1/2" pvc bushing. The skinnier part fits inside the petg and the fatter end fits inside the pvc, so everything fits nice and snug.

Posted Image

It used 9" of a [k26] spring and has 5" of draw. It shoots pretty far. Still kinda rapey.
  • 0
"A lot" is two words.

#903 venom213

venom213

    Member

  • Validating
  • 1,294 posts
  • Location:Saint Paul, Minnesota
  • State:Minnesota
  • Country:United States

Posted 11 July 2012 - 08:18 PM

Fresh Manta+ made for Koree. East Coast Nerfers can expect to see this in action very soon! Want one for yourself? Check out my sales thread (link in my signature) for information on purchasing one.

I vinyl dyed it red for the following reasons:
1. I wanted to see how well vinyl dye works on Polycarbonate.
2. Koree likes red.
3. I wanted it to stand out more than it would if it were clear/frosted.
4. As homage to Baghead's original homemade Manta.

Posted Image

Underside:

Posted Image

The layers:

Posted Image

Posted Image

Edited by venom213, 11 July 2012 - 08:37 PM.

  • 0

#904 Green Wing

Green Wing

    Member

  • Members
  • 68 posts
  • Location:Vancouver, Washington
  • State:Washington
  • Country:United States

Posted 17 July 2012 - 07:45 PM

Snapbow MK V with some improvements. Most notable is the polycarb clothespin and trigger. Just wanted to make something simple for my first 100% homemade.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

It is all mechanically fastened and removable with the exception of the foregrip mount. Sideplates are just for cosmetics as I always thought traditional Snaps were ugly.

Video for firing and more details
  • 0

#905 bhajj94

bhajj94

    Member

  • Members
  • 180 posts
  • Location:Springfield, PA 19064
  • State:Pennsylvania
  • Country:United States

Posted 17 July 2012 - 10:37 PM

Okay, so here is a couple of upgrades that I did to my SNAP Carbine. First, I added a cpvc breech using a broken At2k pump. Also, I painted my name into the stock. Finally, I connected the priming handle to the breech so that when I pull the priming handle, it also closes the breech, simultaneously. It improves the fire rate quite a bit. The range is still:
Max Range: 110ft
Effective Range: 95ft
Accurate Range: 70ft
Use: Springer Primary

Full gun
Posted Image
Breech connector
Posted Image
Breech closed (gun primed)
Posted Image
Stock with name
Posted Image
Close up of breech
Posted Image
  • 0
Probably lurking somewhere...

#906 Shoopy

Shoopy

    Member

  • Members
  • 208 posts
  • Location:Sunbury, PA 17801
  • State:Pennsylvania
  • Country:United States

Posted 20 July 2012 - 07:23 PM

Did her up all special for tomorrow at HHNO. I not a great painter. I wish I were though.

Posted Image

Yes, that is blue painter's tape. Swag I guess some would call thee

Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#907 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 20 July 2012 - 10:27 PM

Posted Image
I was busy today.

I suppose you can call these "Rev. 2."
They have a longer barb, so tubing doesn't come off as easily, consistent spring (I was just using what I could find laying around before), and doubled-up O-rings around the pin. They're also polished and waxed.

EDIT: They're multiplying!
Posted Image

DOUBLE EDIT: Made a 3K tank for Ozymandias.
Posted Image

Edited by roboman, 21 July 2012 - 11:55 PM.

  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#908 Eraser475

Eraser475

    Member

  • Members
  • 99 posts
  • Location:Echo, Mn
  • State:Minnesota
  • Country:United States

Posted 24 July 2012 - 09:47 AM

Took the spring out of my Snapbow and slapped some bow arms on it. I used this: http://nerfhaven.com...showtopic=20195

Posted Image

I haven't measured ranges yet.
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#909 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 612 posts

Posted 25 July 2012 - 06:15 PM

Posted Image

Finished this a few weeks ago, never got around to posting it. Unlike BullPAC v1, this is actually a good blaster that fires with as much power as the bow tension should entail. The homemade wye is used because it feeds rubber domes without any problems. The only weakness is that with it's 7" of draw, the stock is inconveniently long, so this is most easily fired with the stock over the shoulder rather than pushed into it.

The rod seal is a 1/4" bronze bushing, the plunger rod is 1/4" aluminum with threaded ends. The catch is all kinds of awesome, but details are in the bullPAC thread already with regards to the rubber band blaster that I reconfigured into this thing. The fitting in the middle is a bizarre Menards find, but can be replaced with a 3/4" T with some loss of efficiency.

Currently the only things I don't like about it are that the barrel is crooked (Bent at the optimal coupler) and that 7" of draw makes the stock a bit long.
  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#910 Scooter1

Scooter1

    Member

  • Members
  • 36 posts
  • Location:Ventura County
  • State:California
  • Country:United States

Posted 26 July 2012 - 08:37 PM

Posted Image

Pistol-ish rainbow. Used 3 layers of 3/8" cutting board for the handle which turned out nice looking and way more comfortable than the standard 3/4" wood handles. I also cut the catch out from a 1/4" cutting board, which was much less expensive than 1/4" polycarb from mcmaster...

Edited by Scooter1, 26 July 2012 - 08:38 PM.

  • 0

#911 bhajj94

bhajj94

    Member

  • Members
  • 180 posts
  • Location:Springfield, PA 19064
  • State:Pennsylvania
  • Country:United States

Posted 28 July 2012 - 10:23 PM

My variation of the PUMPSNAP. It gets around 100-110 flat with a 12 inch hopper and 14 inch barrel. And, of course, its pump action!
Posted Image
From camera mount...
Posted Image
Posted Image
Clothespin trigger...
Posted Image
Extra comfy curved stock...
Posted Image
  • 0
Probably lurking somewhere...

#912 Shoopy

Shoopy

    Member

  • Members
  • 208 posts
  • Location:Sunbury, PA 17801
  • State:Pennsylvania
  • Country:United States

Posted 28 July 2012 - 10:29 PM

Finished up a commission for a member of my clan, PA Power. This is Bhajj's SnapBow.

Posted Image

Full album here.

Edited by Shoopy, 28 July 2012 - 10:32 PM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#913 Bchamp22795

Bchamp22795

    Member

  • Members
  • 209 posts
  • Location:Bloomington, IL
  • State:Illinois
  • Country:United States

Posted 28 July 2012 - 11:26 PM

Five identical Aabows that I made to use as loaners for Mayhem! 24" Bow arms and 15" Plunger tubes. All are dry-fire-able and super smooth, super powerful.

Posted Image
  • 0

#914 MrPzowned

MrPzowned

    Member

  • Members
  • 46 posts
  • Location:Indiana
  • State:Indiana
  • Country:United States

Posted 31 July 2012 - 02:26 PM

The crooked barrel has been fixed.
Posted Image
and this crime against plastic nature...
Posted Image
  • 0
17:54 Noodle Yes what he did was stupid
17:54 Noodle but it's a plastic toy
17:54 Gears BUT IT COULD'VE BEEN MY PLASTIC TOY

#915 Green Wing

Green Wing

    Member

  • Members
  • 68 posts
  • Location:Vancouver, Washington
  • State:Washington
  • Country:United States

Posted 02 August 2012 - 05:53 PM

Tornadobow I made awhile back. Video for firing and more details

Posted Image
  • 0

#916 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts
  • Location:Lanoka Harbor, NJ
  • State:New Jersey
  • Country:United States

Posted 02 August 2012 - 07:16 PM

My andtheherois made +Bow:
Posted Image
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#917 Lucian

Lucian

    Member

  • Members
  • 445 posts
  • Location:Mansfield, CT, 06268
  • Country:United States
  • u/lucian151 on Reddit

Posted 04 August 2012 - 01:15 AM

Built a kick ass Rainbow Pump, currently being cuddled unintentionally by Roboman in his unconscious state.
Posted Image
  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#918 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts
  • Location:Westchester County, NY

Posted 04 August 2012 - 06:48 AM

Posted Image

See you ladies on the field. (That includes you, Lucian. Your blaster is inferior).

APOC 2012
  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#919 Bchamp22795

Bchamp22795

    Member

  • Members
  • 209 posts
  • Location:Bloomington, IL
  • State:Illinois
  • Country:United States

Posted 04 August 2012 - 07:50 PM

L+L made by AceNerfer. He did a great job. I love the wooden handle. I replaced the spring with a K45 which gets pretty much full compression.
It needs a longer barrel to get maximum range, but I prefer it more compact.
Posted Image

My personal Rainbowpump. Paint has some wear, but the thing shoots great. Fully dry-fire-able, smooth priming, extremely comfortable.
It uses a 1.5" Wye for the foregrip. Its amazingly nice, but was a pain in the ass to do. The wye tapers down in the middle to equal the ID of Sch40 1.5" PVC.
Took a lot of hand sanding to get it to slide over the plunger tube.
Posted Image

A RainbowPump I made last spring for a guy in Singapore.
Posted Image

Three more RainbowPumps on the way! I plan to sell these. Two will have 7" of draw, one will have 6.5" of draw.
All 3 will have full compression with a [k26](I will cut down the spring to get full compression).
All will have sturdy, 3/8" thick rainbow catches and be fully dry-fire-able. Perfect seals on all of them guaranteed.
I'll be posting a sale/commission thread when they are all complete. You can PM me if you want though.
Posted Image
  • 0

#920 BK201

BK201

    Member

  • Members
  • 27 posts
  • Location:Easthampton
  • State:Massachusetts
  • Country:United States

Posted 06 August 2012 - 08:07 PM

Jspb style gun
Posted Image
  • 0

#921 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts
  • Location:Columbus, OH 43201
  • State:Ohio
  • Country:United States

Posted 09 August 2012 - 09:31 PM

Posted Image

Posted Image

Posted Image

Coop gave me his HAMP shortly before Apoc. I used it during two rounds of Carpe. Ineffective, but silly.

Posted Image

Re-worked my +Bow. Thinking about building a new one.
  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#922 Lucian

Lucian

    Member

  • Members
  • 445 posts
  • Location:Mansfield, CT, 06268
  • Country:United States
  • u/lucian151 on Reddit

Posted 10 August 2012 - 07:16 PM

My Rainbow Pump's handle broke at Apoc, and I was pissed off.

Concept-
Posted Image

Shiny-
Posted Image

Actually worked-
Posted Image

Boom-
Posted ImageOh and that's Ultem.

Edited by Lucian, 10 August 2012 - 07:18 PM.

  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#923 Eraser475

Eraser475

    Member

  • Members
  • 99 posts
  • Location:Echo, Mn
  • State:Minnesota
  • Country:United States

Posted 11 August 2012 - 08:45 PM

I made a Snap pistol, based off of GMLindustries' "NOMshot". ()

I call it "Shortshit"

Posted Image
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#924 bhajj94

bhajj94

    Member

  • Members
  • 180 posts
  • Location:Springfield, PA 19064
  • State:Pennsylvania
  • Country:United States

Posted 12 August 2012 - 05:08 PM

Here are two blasters.
This one is a SNAP Bow. I did the red/white paint job. Says BHAJJ94 on the top, and PA Power (clan) on the sides.
Posted Image
Posted Image
Posted Image
PA...
Posted Image
...POWER!!!
Posted Image

The second one is a Pump SNAP acquired in a trade with shoopy. It is actually a PAC Snap converted into a springer, since the bow arms were just too bulky to be running around with. Everything but the conversion was done by Shoopy.
Posted Image
Posted Image
Posted Image

Edited by bhajj94, 30 September 2012 - 10:51 PM.

  • 0
Probably lurking somewhere...

#925 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts
  • Location:New York 11220
  • State:New York
  • Country:United States

Posted 14 August 2012 - 10:40 AM

Pumpsnap 3.0 for m3gamanr on youtube.
Posted Image
No slots in the plunger rod.
Posted Image
Pm me if you want one.
  • 0
Check out my youtube channel My link
Also check out my blog: website


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users