1306 replies to this topic

[Nerfomania]

So I hear you guyz liek PumpSnaps?



Top to bottom: Gamers 2.0, Old Guys new 3.0, and a 3.0 I had to whip up for myself in 4 hours because my 1.5 finally has had it.

>

[McCawley]

Yeah! I finally am accepted to post and reply.
I came here to get info on dart mods and was amazed at what all you guys/girls have managed to create.
It's going to take a long time to soak up all the information on this site.

For my Homemade I built a Precision rifle to take out my neighbor, (Ongoing Nerf war)
Doesn't shoot as far as I want, bolt is too constricted I think. Plus it only gets off about
4 rounds before running out of air. But I only need one good shot!

Edited by McCawley, 15 June 2012 - 09:30 AM.

[zipx]

shoots hard, now has a stock and RSCB, and promotes healthy lifestyle choices.

[Daniel Beaver]

Writeup

Firing video

[CaliforniaPants]

Alright NH, its time to step up the game.

The wrist breaker, an atempt at a homemade ratchet blast that went very wrong. Solid steel construction, loosely based on the LAB but due to split's impossibly shitty templates and writeups everything was redesigned.

Fully TIG welded on all connections, good for 10,000 pounds of force.

Relatively small draw, but large diameter plunger tube. And it can handle ridiculous spring strengths due to the sideplates taking all the force.

yep

[Ryan201821]

Getting there..

[Dremz3]

The first gun is my snap carbine with a [k26]


The second is my pump action R3L with custom stock and handle


The last gun is a commissioned pumpsnap


This also has a picture with a snap

[ChaosPropel]

Oh children...


It's a plusbow. Shortened from the original design, metal plunger tube, U-cup seal, delrin plunger rod, polycarbonate handle (three layers of 1/4" thick PC), and clear polycarb sideplates, that I made prettier with craft foam. Purple and orange are classy.







It's only about 1" shorter than a stock crossbow. I took an inch off the plunger tube, and the sideplates are only 12" long.

She'll be at DCNF.

EDIT: Updated with better pics.

Edited by ChaosPropel, 21 June 2012 - 08:39 PM.

[landstricker]

Pumpsnap with thumbhole stock, and all the other good stuff.



NoM style pumpsnap.

[andtheherois]

BULLPUP PUMPSNAP WHAT?!


Using my bed sheets to dispel angle illusion, the Bullsnap (As I'm going to call it) Is about the same size as a normal pumpsnap. The handle could benefit from being a little longer, but that's cause I have fat hands. Had to round the trigger a bit so it wouldn't hurt my palm. The plunger head stops just before the elbow thanks to 2 rubber grommets that smash against eachother (one on the bushing and the other on the plunger rod). The elbow is used to coupler with the wye since I use female-male connections for everything, instead of the other way around.


Just a regular style snap catch, but removing all the crap needed to seal it. The head is only pressure fit on as the blaster is dry fireable. Makes taking it apart a whole lot easier. The real plunger head is a skirt seal sandwiched on 3/4 CPVC wit 3/4 CPVC end caps drilled through to accept 1/2 CPVC, then bolted down. I took ideas from the Shortened Pumpsnap to make the spring feasible to have in the PT.


Tee diddled to allow the back of the spring rest/stock/PT to rest inside, making the blaster a little more comfortable for me.


And obligatory money shot. Most of the measurements were eyeballed with very little actual measuring. It's getting about 6.5" of draw and I don't know how much range. This is only the prototype and will be tested out at DCNF, though I feel bullpup designs are more suited to closer combat such as how we do in NJ.
V1.0 will be a lot cleaner, using set screws in various places, a barrel support, etc. I pretty much just used what I had lying around, including the handle from an old pumpsnap. No real special materials are required, minus perhaps 3/4 thinwall. The pump grip can be made of a coupler so you don't even need 1-1/2 thinwall.

Edited by andtheherois, 21 June 2012 - 10:35 PM.

[thedom21]

Rainbow pistol I started about 3 months ago and just stopped working on it. Decided it was time to finish it up. The whole thing without a barrel is 10" long and has 2" of draw. I need to put a skirt in this because it has a pretty crappy seal with the rubber washers I am currently using.


and primed

[bhajj94]

Here is my SNAP Carbine.
Range: 110ft
Kind of barrel: CPVC (4-speed loader) 8 in.

[PANIC]

Hello from Spain.
sorry English translator.
My last prototype Whip-S2, only measures 47cm,, shot 15-25m range, very light, Dart 15mm diameter.



The Whip-S1,same design as the S2, measuring 57cm, 25-35m range shot, very light, Dart 15mm diameter.
Dart foam 15 mm diametre.


Hope you like.
Your plusbow and snapbow are magnificent.

[Xellah]

Bowpup. I still need to make a spacer to stabilize the barrel and replace the two piece bow arms with one continuous piece.



It's all about the angles.



Reworked the WNTS. Now the pump doesn't wobble or leak.



Pumpbow in the making.

[thedom21]

Nice to see another WNTS out there.
I got a proof of concept blaster I guess. I wanted to attempt to make a rainbowpup but the writeup isn't out yet so I made it my own way. It isn't the neatest blaster but it wasn't supposed to be. It was just to see if I could make one functional. I still need to buy the parts from Mcmaster for Ryan's omnidirectional catch and a skirt seal. Other than that I just need to tweak a few things here and there.

[numa-t49]

An older picture of my current primary. It is currently missing alot of pink. Standard snap ranges with the ability to dry fire. Pump action with a 14in barrel and brithop with a 12 in clip. Also it is alot lighter than almost all other pump-snaps.

Edit: 100th post, about damn time.

Edited by numa-t49, 27 June 2012 - 09:23 PM.

[cheerios]

I got some shit done recently.



Built this snap variant of the rainbowpup a couple days after Ryan made his. It shoots 90-95' with a less than optimal seal.



I upgraded my rainbowpump rev. 1 into a rev 2. It uses rubber grommets to make it dry fireable and uses a beaver omni directional catch.



I made this in an attempt to make a super short gun, It's as short as a maxshot.

Also for those who didn't see Louie being super butt hurt on Nrev, this is my entrance blaster for his bull-pup contest it is directly based off of his revshot carbine design.
It is nicknamed "Butt Hurt?"



It shoots 90' consistently.

Edited by cheerios, 06 July 2012 - 10:42 AM.

[Ryan201821]

It is nicknamed "Butt Hurt?"

Win.

Just finished up Ted's RainbowPups



By the way, he's cooler than you.

[thesoxfan1234]

Finished and functional RainbowPup. I had a TON of problems and a wanted to hit it on the ground like a mad baseball player. The problem was that the spring wasn't compressing enough. *sigh* Clear PVC would solve the problem right away...

Rounded the side supports. Just thought it looked better.

Another look.

With my Pumpbow

Edited by thesoxfan1234, 28 June 2012 - 04:00 PM.

[Ryan201821]

Still needs some kinks worked out, but it's functional. Super fun to use. Also I don't know why koree thought a CPVC tee was a good handle. It is terrible.

[koree]

Also I don't know why koree thought a CPVC tee was a good handle. It is terrible.

Noted and agreed, but I've already fixed it a while back. On a silly note, i can run at full speed with it simply buttoned onto my tac vest and it won't fall off. It is very silly but fun and surprisingly effective.

Also, REALLY happy to see blasters with this layout being made.

Edited by koree, 02 July 2012 - 06:41 PM.

[rego]

Rainbowpump with a twist, instead of modmans rainbow catch in an endcap, I put it in an internal couple. The gun is now much easier to disassemble.

[PANIC]

WHIP-2 photos of the first prototype.
length 55cm, range 35-38m,, spring 25cm, weight 1.5 kg

Internal.









pulley




Loading rail






trigger system











I hope you serve.

[venom213]

Just finished a homemade priming handle for the Triple Shot. It is compatible with the stock internals. It's made out of 1/4" Polycarbonate, 1/8" Polycarbonate, 3/4" Wood sheet, and various screws/bolts. The handle is based off of a Raider priming handle and is coated in Plasti-Dip for comfort. I plan on adding these to my sales thread once I finalize a few things on them. In addition, I plan on making priming handles like this for Pump Action Shotguns and Rapid Fire Dart Guns.

Edited by venom213, 07 July 2012 - 07:57 PM.

[Daniel Beaver]

A SNAP variant of the DCIT. It's a full-sized SNAP, with 6" of draw, 16" barrel and footlong integrated RSCB clip. The plunger tube is too long for comfortable priming - half-length makes a lot more sense for these. It would work a lot better with a longer trigger bar, but I didn't have the materials to do that. I'm probably going to cut down the barrel, plunger tube and hopper as well as shorten the draw to 3".

Edited by Daniel Beaver, 09 July 2012 - 02:09 PM.