Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#926 Darth Maker

Darth Maker

    Member

  • Members
  • 6 posts

Posted 14 August 2012 - 03:51 PM

I should have had this up a week ago, but whatever. I made it three days late for Apocalypses. Tis a shame, because I would have used it there. Ranges are dependent on bow/string tension.

Posted Image

Nothing crazy special, basically just an AaBow. The only section that can't be easily disassembled is the front bushing on the plunger tube. And that's because it needed to be glued for the seal. The bow arms are one piece 3/4" CPVC, and the 1" PVC is one piece as well. E-tape and screws hold them together.

Posted Image
Posted Image
Posted Image

Higher resolutions and more pictures can be found here: http://imgur.com/a/BiWyb#0
  • 0
- Darth Maker[size=1]

No wyes? Try this: The DMK2 wyeless hopper clip.[/size]

#927 koree

koree

    Member

  • Members
  • 311 posts

Posted 19 August 2012 - 12:23 AM

Another version of the DCIT. I wanted to come up with a trigger system that would be easy for anyone to make. This one uses a hinge and a modified L bracket. Catches exceptionally well. If it works well on the field I'll do a writeup.

Posted Image

Close up of the trigger.

Posted Image
  • 0

#928 Bchamp22795

Bchamp22795

    Member

  • Members
  • 209 posts

Posted 19 August 2012 - 09:06 PM

Three new RBPs. All war tested at Mayhem. They are nearly identical. The first uses a [k26], the back ones use a K45. They all have ~7.25"-7.5" of draw. New style, lightweight plunger rods. Dry-Fire-able. All are awesome.
Posted Image
  • 0

#929 HasreadCoC

HasreadCoC

    Member

  • Members
  • 274 posts

Posted 20 August 2012 - 09:36 AM

My version of (youtube) Drac's mod. The slot in the pvc allows you to avoid disks flipping over on longer clips, and the polycarb piece is really nice.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

I scrapped 2 of the hornet attachment parts off 2 Titan shells for the clip attachment part. It works well. The small PVC is like 1" thinwall and the large PVC is 1.5" PVC.

EDIT: I'm putting this in homemades because the item in question is the clip, which is homemade. The proton itself is stock.

Edited by HasreadCoC, 20 August 2012 - 09:38 AM.

  • 0

I'm the only respectable person here. The rest of the NIC are pretty much just child molesters.


AKA: ObiWonTwo on Nerfrevolution, and most of the rest of the internet for that matter.....

#930 bhajj94

bhajj94

    Member

  • Members
  • 180 posts

Posted 20 August 2012 - 02:55 PM

My Pump SNAP just wasn't getting the desired effect of a primary (mostly due to spring troubles). So I decided to do the opposite of what my brother did with his, and convert it into a PAC Snap. Now, without having to worry about spring compression, I have a good, usable, primary. The only thing that I need now is some thin-wall pvc for the grip (I'm borrowing some on my bro's).
Posted Image
Camera mount
Posted Image
Wooden Clothespin Trigger (just because I like wood)
Posted Image
Adjustable tension
Posted Image
Comfy as hell curved stock
Posted Image
  • 0
Probably lurking somewhere...

#931 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts

Posted 21 August 2012 - 10:06 AM

Pumpsnap 3.0 for zman.
Posted Image
Posted Image
No slots.
Posted Image
  • 0
Check out my youtube channel My link
Also check out my blog: website

#932 bhajj94

bhajj94

    Member

  • Members
  • 180 posts

Posted 23 August 2012 - 03:59 PM

Snap Carbine (re-make):
I don't really know why I felt like making another Snap Carbine, but I was sure that it could be better than my first one. I will probably try to sell this one (I already have a Snap Bow & PAC Snap). But I just had to prove to myself that I didn't completely suck at making these.
Ranges: Still only about 90ft (singled) - really depends on the dart, some go up to 120ft.
The air seal is much better in this one, but it has to stay constantly lubed, or it will suck. (It uses a skirt seal)
Posted Image
Still rockin' the Raider stock...
Posted Image
Primed, almost full compression on the k18...
Posted Image
Added Snap Bow Mk5 style foregrip (super comfy)
Posted Image
  • 0
Probably lurking somewhere...

#933 Phoenix66

Phoenix66

    Member

  • Members
  • 64 posts

Posted 25 August 2012 - 07:43 AM

What up Nerfhaven! First post here, and I'll show off some of my Homemades.
Posted Image
Pumpsnap 3.0 I recently painted it, I will get some updated pictures soon.
Posted Image
This picture is sloppy. I probably should retake it, and edit it in. I'll work on it.
Posted Image
PumpSnap I made a while ago for modtheblognerf (Nerfrevolution member)
Posted Image
My PAC, as of now has been converted to a AAbow, because my pumpsnap is far better than this.
Posted Image
Here's a group picture of the 5 PAC's the night before Foam in the Fort 3. Again, not very good.
  • 0

The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)


#934 Defender 7

Defender 7

    Member

  • Members
  • 128 posts

Posted 25 August 2012 - 04:30 PM

Posted Image
PAC Snap with a 25 dart chopper.

Edited by Defender_7, 25 August 2012 - 04:31 PM.

  • 0
I like bacon.

#935 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts

Posted 28 August 2012 - 06:15 PM

My Snap Carbine. It's my first homemade and I am really liking it. It rocks a skirt seal, [k26], and comfy raider priming handle. Everything is mechanically fastened with the exception of the front bushing. Hits 100+ ft.
Posted Image
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#936 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 28 August 2012 - 07:49 PM

Fresh Manta+, this one is green with white zip ties. I'm expanding the palette of aesthetic options for Manta+s, stay tuned for an update in my sales thread.

Posted Image

Posted Image

Posted Image

Edited by venom213, 28 August 2012 - 07:50 PM.

  • 0

#937 JPRoth1980

JPRoth1980

    Member

  • Members
  • 56 posts

Posted 30 August 2012 - 08:26 PM

Since he was nice enough to put the shield up, I figure I'll show off what it looks like installed on a blaster.

Posted Image

Posted Image

SnapManta. Based off of one of the Rocket Launcher submissions, it uses 2 Snap chambers to feed into a single 19" barrel. As expected, double-fires are quite common, and the range is frankly a little scary.

Posted Image

Here's the underside showing off the comfy padded handguard of the shield and the double trigger set up. I plan on making a cleaner version (and swapping the shield out) here shortly, but for the moment, I am very proud of this thing.
  • 0

#938 Nerfomania

Nerfomania

    Member

  • Members
  • 207 posts

Posted 31 August 2012 - 01:49 AM

Posted Image

Lookin' Good.
  • 0
20:45 Talio I'll have the talk with you
20:45 Talio penis in vagina
20:45 Talio fin

#939 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 31 August 2012 - 06:19 AM

Posted Image

Posted Image

A group pic of Coop's homemades with a few of mine (minus the Recon). I'll be adding a Crossbow to this soon, as will he.

Posted Image

Re-strung my Bowpup with some supa-leet green cable. Secured some wobble from the tee and stock with screws, and added some tape. Because colored e-tape is legit.
  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#940 Phoenix66

Phoenix66

    Member

  • Members
  • 64 posts

Posted 06 September 2012 - 04:15 PM

Finished painting my 3.0 Pumpsnap. It turned out really nice.
Posted Image
  • 0

The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)


#941 TheSilentRebel

TheSilentRebel

    Member

  • Members
  • 172 posts

Posted 08 September 2012 - 06:37 PM

Final version of the MantaSnap...

Posted Image

I originally built this for the Parabolic Toys Rocket Launcher contest.

Posted Image

Full 7 inches of draw.

Posted Image

Ropes, it shoots.
  • 0
We are men of action, lies do not become us.

#942 Siriuslyharry

Siriuslyharry

    Member

  • Members
  • 28 posts

Posted 08 September 2012 - 06:42 PM

Posted Image
PAC Snap with a 25 dart chopper.


^This makes me happy.


Posted Image

^This makes me happier. The PacSnap 2.0, otherwise known as the #YOLOBOW, arguably best way to make a PacSnap.

I don't wanna flood this thread on my first day, but there shall be more to come.
  • 0

#943 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts

Posted 12 September 2012 - 05:59 PM

Pumpsnap 3.0 for biwinningpanda
Posted Image
Posted Image
  • 0
Check out my youtube channel My link
Also check out my blog: website

#944 SomethingNerfey

SomethingNerfey

    Member

  • Members
  • 47 posts

Posted 14 September 2012 - 03:30 PM

Posted Image
  • 0

#945 koree

koree

    Member

  • Members
  • 311 posts

Posted 15 September 2012 - 11:36 PM

Here's a prototype of the blaster I'm currently working on.

Posted Image

The idea is to shorten the blaster by putting the spring, trigger, priming mechanism in one tube, and then have the actual plunger tube above it. It works pretty well and is about 8 inches shorter with the same barrel lenght as my RBP. However this prototype only has about 4 inches of draw.

The next version will have a few improvements. Side plates for additional structural integrity and ease of Assembly, an adjustable stock, and of course, additional draw (going for 6 inches.). I also plan on using a rainbow catch.


Posted Image

Edited by koree, 15 September 2012 - 11:37 PM.

  • 0

#946 atomatron

atomatron

    Member

  • Members
  • 579 posts

Posted 16 September 2012 - 12:39 AM

HEC 2c, Writeup in the works. This is a moderate redesign of an earlier model which was a re-purposed failure (trigger linkages are dumb). This one works perfectly, shoots as far as everything else, has 6.5" of draw with a [k25], total length is 33" and it probably weighs close to 10 pounds. At first the handle being so far back was kinda weird but now I'm comfortable with it, this is still an improvement over the other one.

Posted Image

The original HEC 2(a) is in the middle, I initially wanted a standard handle positioning.

Posted Image
  • 0
Perche Germolgi. [Because it shoots]

Rainbow Clan

#947 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts

Posted 17 September 2012 - 02:26 PM

My Nintenbow:

Posted Image

Features:
-Mechanically Fastened NES Zapper Foregrip
-Integrated vintage Pokemon stickers
-Cheesy Name
-Built off of an andtheherois made +Bow
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#948 Phoenix66

Phoenix66

    Member

  • Members
  • 64 posts

Posted 18 September 2012 - 06:00 PM

Posted Image
Posted Image
Posted Image
New Black, White, and green Pumpsnap 3.0
Really nice, loving these things.
  • 0

The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)


#949 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts

Posted 25 September 2012 - 05:38 PM

My modsfornerf PumpSnap 3.0 with my new paintjob:

Posted Image
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#950 Phoenix66

Phoenix66

    Member

  • Members
  • 64 posts

Posted 29 September 2012 - 02:19 PM

Posted Image
New, unpainted PumpSnap. It works really well, except for me cutting the slots too long. Oh well, guess it doesn't matter anyways.
You know you want one....
  • 0

The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users