1306 replies to this topic

[NerfRifleman]

hey carbon, where can you get the adhesive film you used for the stinger??
because i am interested in using it for the the shark face on my paintjob for the CAR

heres what i was thinking:

tell me what you think
thanks

[six-five-two]

After reading the FAR homemade writeup and seeing the trobles with the bolts getting pushed up into the gun
I was wondering if you had a "upside down gun" as in the magazine would be going down into the gun would that solve any poblems? make new ones? plz answer
- N=MC2

Again, sorry to backseat mod a bit, but please fix your spelling and grammar.

The concept you are describing is a gravity clip. It works fine as long as you have a weight at the top to prevent the darts from moving around and to push it into the chamber. It may flip around if you turn the gravity clip upside-down.
Boltsniper made this for one of his guns aswell:
http://boltsniper.com/BS-1/BS1.htm

[Carbon]

hey carbon, where can you get the adhesive film you used for the stinger??
because i am interested in using it for the the shark face on my paintjob for the CAR

tell me what you think
thanks

You should be able to find transparent laser printer film at most office supply stores. You'll have a problem using it as the face, though, as printers can't print white...that would be a clear area, so it would show your paint job.

[NerfRifleman]

thanks
im going to start a thread for it as soon as i size the images down and you'll be able to see the final product there.

Edited by NerfRifleman, 20 November 2007 - 08:20 PM.

[BadWolf]

new member here and i thought i would post a pic of my rocket launcher. it is loaded by means of a bolt action and it shoots the 2" nerf vortex rockets , i use constant air with a 2 regulator system . it also has a preset safety popoff valve set at 120 psi normal operating pressure during a game is 50 psi. when this was taken i was using an electronic sprinkler valve but have now moded it to use a blowgun (alot more effecient). with this setup i can fire a shot every 3 seconds, wich is prety good i think.i can accurately hit targets out to 150yrds but it's range is about 350 yrds or more if i kick up the pressure.

click on pic to get bigger pic.

Edited by BadWolf, 11 December 2007 - 03:31 AM.

[Prometheus]

Fuck, it's huge. How heavy are these projectiles, you're getting almost 4 times the max distance of a standard stefan.

[BadWolf]

the nerf vortex pocket rocket, they are not allowed to be modified in anyway.

[Quilan Fett]

the nerf vortex pocket rocket, they are not allowed to be modified in anyway.

Says who?

[BadWolf]

say's the rules of the games i play in.

[Prometheus]

That's awesome. Any chance of some video footage of the beast in action?

That also explains how you are firing the thing rocket so far.

Edited by Prometheus, 13 December 2007 - 09:28 PM.

[BadWolf]

i can shoot some vids next weekend, i'll be doing some vids of another gun and can do both at the same time.

[Senor Wolfwood]

new member here and i thought i would post a pic of my rocket launcher. it is loaded by means of a bolt action and it shoots the 2" nerf vortex rockets , i use constant air with a 2 regulator system . it also has a preset safety popoff valve set at 120 psi normal operating pressure during a game is 50 psi. when this was taken i was using an electronic sprinkler valve but have now moded it to use a blowgun (alot more effecient). with this setup i can fire a shot every 3 seconds, wich is prety good i think.i can accurately hit targets out to 150yrds but it's range is about 350 yrds or more if i kick up the pressure.

click on pic to get bigger pic.

Wow. I love you. I don't know if that is you holding it or somebody else, but he looks very out of place with those guys in the background.

[dadude778]

This is my first homeade without its barrel

close up of the workings

Its the smple sprinkler valve, with a bike pump. I plan to get a battery powered compressor but can"t decide on the brand
Its not my idea but I changed the brace for the bike pump by adding a vertical and horizontal brace. I also made a missle shooting barrel and a arrow shotting one as well
So what do you think?

Edited by dadude778, 20 December 2007 - 02:46 PM.

[Vimes]

Hi all. I’ve been lurking on the Haven for about a year and I thought it was time to contribute my homemade.

This is my fourth working homemade:



Total Length: 40.5 in.
Plunger travel: 3 in.
Barrel length: 9 in.
Range: 65 to 75 ft.

I’m not sure if it’s a new concept, but the magazine
moves with the bolt while the barrel remains in a fixed position, allowing me to
get the dart as close to the plunger tube as possible

Open:


Closed:


I'm very pleased with this gun, but the ranges fell a little short of my expectations.
Ah well, improvements to add to the next project.


Happy Christmas!

[NerfRifleman]

wow, as far as ive seen that is a new concept, a good one too.
you should post a thread for that.
good job

[CaptainSlug]

Might as well dump this here for posterity.


Will add a breech eventually

[NerfRifleman]

what kind of ranges does that thing get?

[CaptainSlug]

110 to 140 feet
For more see: http://nerfhaven.com...showtopic=10387

[TriggerHappyAzn]

I've been working on this these last few days...






A breakdown of the major components


Looking down the length of the gun
No sight or rail installed yet.


Magazine components
Follower not shown

http://s268.photobuc...nt=DSCI0111.flv
Cycling through a few shells

http://s268.photobuc...nt=DSCI0114.flv
Firing a shot

Features:
10-shot magazine
Spring powered pump-action
Interchangeable barrel system

range: 90-100ft

Edited by TriggerHappyAzn, 04 January 2008 - 09:48 PM.

[Prometheus]

Fucking Awesome gun. Any chance of a write-up?

[DTReaper]

Hey TriggerHappyAzn nice gun it truely is a simple is better gun, with its few parts and rather simple design. All I have to say is awesome. But I have a suggestion perhaps you should put some like foam on the front of the plunger head cause the sound on the video of it hitting the back of the other pert can't be good for it. PVC has only a certain amount of impact tolerances before it breaks so it might be a good idea for some padding in there. Other than that great gun I look for more great work from you in the future.

-DTR

[Pineapple]

I've been working on this these last few days...

I'm violating some of the rules of this thread by merely posting comments, but I have to say this.


I remember when TriggerHappyAzn made this weird looking pathetic attempt at a submachine gun out of some sprinkler valves over two years ago. It even had a folding "stock". He made it work, and even had a crazy video with it in action.


This is definitely a HUGE step up. I'm still speechless. You guys know how I feel about pseudo-military "real" looking "guns". But that thing is nice. And the Sten-type side mag... definitely different. In a cool way.


Wowsers.



-Piney-

[ejrasmussen]

My first homemade spring powered gun.

After taking off the duct tape like a man, remodeling, and painting it.

Un-cocked

Cocked

The inline clip made out of this 1/2 copper tubing that i bought when i was a noob.


Name: Pulse Rifle
Range: havent measured yet but probably aroud 45-65 feet.
Inspiration:
Comments: the plunger system is out of a disk shot gun that I failed horribly to mod and added a nice spring with an extra o-ring.

EJ

Edited by ejrasmussen, 10 February 2008 - 03:51 AM.

[Flaming Hilt]

TriggerHappy, what's your mag made out of?

This has been my weekend project. I started a couple weeks ago but most of the work was done in the past few days.

Whole:


The black part is the front handle/cocking lever. It's a b* to cock. The clear acrylic is a mag well for Elf, but darts can be loaded one-by-one in there too, which I like.

Top-Down:


Functioning Parts Profile:


Cocked:


Primed:


Firing a shot.

Enough pictures?

I used to have an exploded picture but accidentally deleted it. If the gun ever gets taken apart again, I'll shoot another one.

There weren't any plans, so naturally I screwed up a couple times. And there were quite a few kinks to work out. For starters, the 1" thin wall body wasn't strong enough to withstand being drawn, so that's why there's a 1u1/4" shell over the middle. Then the plunger would come out to the sides when drawn, so I attached a 1/2" CPVC stability rod to the back of it.

Obviously still some aesthetic work to be done (stock included) but it's functional. No ranges yet but it hits across my room HARD so I'm guesstimating 80-100 feet, I don't want to get flamed for saying more though. : o)

Edited by Flaming Hilt, 21 January 2008 - 08:30 PM.