Jump to content


Photo

Buzz Bee shells - print your own


No replies to this topic

#1 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,099 posts

Posted 04 May 2022 - 04:08 PM

I have designed and extensively tested 3D printable dart shells, compatible with all Buzz Bee blasters. These allow for compatibility with solid-core darts, as well as maintaining compatibility with standard buzz bee darts (which are somewhat thicker than regular nerf branded darts). They have better performance characteristics, and you should see an obvious performance increase over the stock shells.

The design has been optimized for both filament and resin 3D printing. You should be able to get good printing results without fiddling too much with settings.

Link to my Etsy shop, where you can buy a set
https://www.etsy.com...ance-compatible

Link to source files
https://www.printabl...r-dart-shooters

R1BAjQc.jpg?1

pt6xxuC.jpg?1

7RSgQdS.jpg?1

zDjaZI3.jpg?1

Dimensions for reference. The source files are in FreeCAD format, so you can modify them as desired.

ydptISN.png


Edited by Daniel Beaver, 04 May 2022 - 04:27 PM.

  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users