9 replies to this topic

[Mr BadWrench]

http://www.lowes.com...Id=1070305&pl=1

 

 

[blitz]

Are you planning to keep the barrel selector? Would be cool to have an RSCB or something on top and a shotgun blast on the bottom. 

[DjOnslaught]

Might depend on the cocking method you go with, as to the coolest way to mod it

[Spud Spudoni]

Dear Lord. I'm pretty sure that's the same plungertube Louiec3 put in my + bow. Even cut down, that thing would probably be deadly as a pistol sized primary with a [k26]. I might consider buying one of these ugly things now. Great discovery Badwrench

[Maniacal Coyote]

Dear Lord. I'm pretty sure that's the same plungertube Louiec3 put in my + bow. Even cut down, that thing would probably be deadly as a pistol sized primary with a [k26]. I might consider buying one of these ugly things now. Great discovery Badwrench

Oh? And what were the other pieces he used?

 

That sounds like something I might try, the DualStrike BOOM pistol.

[CCBall]

If you choose to keep the smart ar systems, you could rebarrel them with the barrels (including the megas) in this website:

https://urbaniso.wor...rs-and-barrels/

Combine it with a strong spring and a seal/lubrication upgrade (and air release hole coverage, ) and you have yourself a ridiculous secondary or a decent pistol primary. That is, with some dump pouches full of full vinyl jackets and good megas. If you integrated a thunderbow ar system on bottom and a persuader's on top and kept full functionality while keeping the significant power increase you would be a genius!

Edited by CCBall, 15 February 2016 - 07:23 PM.

[Spud Spudoni]

Oh? And what were the other pieces he used?

Uh, it's just a basic +bow build otherwise. With a skirt seal.

[Remzak]

The smart air restrictor system turns into a shotgun if it has too much power behind it. With that plunger tube the smart air restrictor would be unusable.

[Maniacal Coyote]

The smart air restrictor system turns into a shotgun if it has too much power behind it. With that plunger tube the smart air restrictor would be unusable.

And the problem with turning it into a shotty is?

[Cartaya]

Even with the Barrel selector, with the Smart AR's it deceptively is underpowered.  But if you tape, fill and sand smooth the grooves In this case I used Krazy glue laminated 3M extreme packing tape, filled the remaining grooves with Krazy Glue and sanded it to 400 grit.  The rest is just a matter of troubleshooting all the airgaps while retaining the functionality of the selector switch, It's a lot like fixing a Super Soaker.  I am building another one, much more powerful, probably Hopper/Hopper, but as you can see, it is very powerful with very little yield if you give it enough modding attention.  You can trim that lower barrel and attach a barrel and coupler to it, or in my case just a 9/16ths piece of brass to use a 17/32nds brass barrel.


here's a test firing.

https://youtu.be/g4Rgc7Rotco



I used 1.1 gram FNJ's cut down to 1 -7/16ths, I only added an 8Kg OMW Longshot spring to the stock spring as a springload and added half of a Century C-528 as a trigger catch spring. I will bring this to the Next NIC war if anyone doubts my results, no big.  Even with all the dead space, it is amazing and still can fire the megas.  I plan to do a writeup soon on here, I promise.

--Cartaya

 

 
 

Edited by Cartaya, 02 March 2016 - 02:48 AM.